Intruder Alarms

Sorry all you good people out there, to ask these questions , but I do not know whether it is I who is Dim or could the Electronics actually be at fault ?. When I try to register the keyfobs under other devices and I go to arming station I am asked to activate the tamper , A Is this the correct section to be in . B As there is no tamper do I just press any button or what. Also with regard to the Tag I am supposed to offer this up to the top left of the panel . I am in the arming station section but nothing is reacting. Again am I in the correct section and is there any way of verifying the Tag is working. I have proved that the Fobs are working by …

anyone have a user panel or eng for the europlex technologies verifier intruder panel, thanks

We have a Eurosec LCD panel intruder alarm in our house which we dont use, but there are 2 panic alarms in the house (little white box with red button on top and a little keyhole on the front), which are set to green so we assume are active (we havent tested as we have no keys to turn off?!?!). Does anyone know if you can buy replacment keys as my daughter is getting big enough that she is bound to press it soon and we are worried we wont be able to turn it off !! We would like to de-activate these alarms.

I am putting together an alarm system for a domestic house using the 75 as the base system but need to add a couple of extra features which don't come in the box ! I am planning on having two master blasters, one inside and one out, these will be the 12v relay versions, will they wire straight into the panel without additional hardware? I also need to turn on about four 240v external floodlights upon activation of the alarm ( say 2000 watts total load ) will any additional hardware be required for these? I am an absolute alarm virgin so if you can keep it as simple as possible I would be very grateful. Thanks for your help

Hi, first post Can anybody tell me the recommended way of wiring a Texecom Premier48 and PSU200XP combination to the mains supply? Would each panel require its own fused spur? I will not be undertaking this work myself, but would like to have some knowledge of what is required before approaching an electrician. Thanks in advance.

Hi Folks, Looking to replace a failing alarm system we currently have in place at a county scout hut. It consists of three PIR's, auto dialar and the central panel/main box. The alarm is activated by locking he door and de-activated my unlocking the door! (Clever stuff ) For ease of use we'd like to keep this system. For numerous reasons we wont be using a control panel to type in the code! Any suggestions? Just looking for a replacement system.. Something that we can use the existing lock with! (The door lock is simply wired straight to the alarm) Regards, Scott

I have just replaced a Flash Guard XL Plus with a Pyronix Belle Sounder fitted to a Pyronix Octagon panel. Flash-guard Belle 1 Tampout BT 4 Supply - B- 5 Supply+ B+ 6 Trigger BA 8 Strobe- STB Added link between TF and B- The speakers sound, the strobe works. the LED's flash and the anti tamper operates when the alarm is unset. If I put the panel in engineer mode and operate the anti tamper switch the panel does not register a tamper condition which is correct but the Belle sounder still operates which means the front panel can not be removed for testing without setting of the Belle internal alarm. …

Hi, we bought a menvier SD1+ speech dialler from your website last week. Upon testing it, our engineer found problems dialling out. Upon talking to menvier tech support he was told that it was from a batch that had been recalled and that we should send it back via our supplier. Our secretary e-mailed tecnical@securitywarehouse.co.uk this a.m., but no reply as yet. Pleae treat this as urgent as our client(unhappy!) has to have a member of staff on the premises until this is installed.

Hi I recently purchased a communicator from ebay for my scantronic 9448+ panel. I thought it would be easy and it seems simple enough. I read the maunal and it says somethign about a lead being connected onto the board. I should be inside the backbox of the endstation but i dont have one. I spent

DOES ANY ONE HAVE A WIRING DIAGRAM FOR INSTALING DUAL COM

Hi, I bought an Optima Compact Gen4 over two months ago. Since then I have been trying to connect it to a bell box from another manufacturer without success. Honeywell technical support simply say that I MUST buy their Reson8 siren! The bell box model is Mars 2000, the instructions and circuitry are attached. I have tried numerous combinations of the panel's A/D/B terminals to the bell's H-/H+/SO terminals but the bell is never triggered by the panel. I know that the bell works because I can manually trigger it by changing the voltage on H+ or H-. Any tips before I give in and buy the Reson8? Thanks...

Afternoon, I have recently installed an optima compact gen3 system in my house and added a remote keypad. The system is working fine and walk tests etc with no problems but whilst it is day made the remote keypad and main control box emit a double beep approx every five minutes (very annoying). I've gone through the operating manual and the engineers manual I have and it seems this would be the system telling me of a line fault for the communications system. However, as you as probably aware, there is no comms system on the compact panel. any idea how I can stop it beeping at me please......? Thanks, Neil Annals.

Hi - I am planning a wireless domestic alarm installation for my home: 2 x PIR detector 1 x Dual tech (PIR & MW) detector* 2 x door contact sensors 1 x shock sensor* 1 x contact & shock sensor* 1 x control panel 1 x remote keypad 3 x RF key fob controls 1 x voice dialler (perhaps SMS support too) 1 x external sounder (can be wired) 1 x external sounder decoy I have read good reviews of Texecom equipment for reliability, price and ease of installation and was hoping to build the system using their products, by siting a RadioPlus Intelligent Receiver centrally and running a wire to a Premier control panel in a cupboard downstairs. However, I don'…

Hi, I'm replacing an old Omnicron 9000. I'm going for an Optima compact gen4. Which SAB bell box goes best with this panel as I'm not sure if the old bellbox will be compatible, and which battery do I need? Thanking you bigtone46

Hi I purchased the above panel recently. The user manual suggests that it can be set up in a way that you only need only press the set button rather than entering the 4 didgit code. I cant see in the engineers manual how to do this. Is this the case and if so how do you set it up. Thanks Jimr

Hi, I purchased the above kit from yourselves just over a week ago. I am trying to wire the bellbox to the control panel, however, the connections listed in the Intellisense AG6 leaflet differ from those on the actual PCB. The manual lists TR- V- ST- V+ S- but the PCB has ST R SW V+ V- So can you tell me what to connect to where on the Accenta G4 panel? Regards, Warren

Hello! I'm about to order the following items and I'd like to know if the batteries are included or not; in case I need batteries could you please tell me which type? ADM-DOM-SI - Domonial Wireless Internal Sounder KTC 805 - Honeywell Domonial Keyfob DO800M - Honeywell Domonial Radio Door Contact Thank you very much!

Hi all, I have a Texecom Premier 48, to which I am trying to use the Wintex software to program. I am attempting to use my PC modem to connect to the 2400 com modem installed on the panel. However I can not get a connection with my PC to the panel. Has anybody had issues when trying to do this? Thanks.

Hi, I purchased the Wintex software off your website last night. However I am unable to download the software, it just says "NOTE: Downloads are not available until payment has been confirmed" My order number is #12973. Would it be possible to email me the .zip file please? Thanks, Tom.

I'm trying to decide which battery to purchase for my G2-44 system that I'm ready to order from Securitywarehouse, and I'd like to know if the Control Panel supplied with the LCD Keypad (Model: C044-01-KPD) is the plastic or the metal one since there is a difference in the battery size (7Ah vs 17Ah). Thanks!

Hi everyone. I have been reading a lot of your helpful comments on various wireless alarms[ in particular]. as you will have gathered by by nom de plume I do not know a lot about these items. My questions are, in the scantronic range is the 703r contact transmitter for hard wiring in garage block to signal back to main panel in residence by wireless and are the 2 wired relay outputs suitable for external sounders [ sab]or do I have to use a conversion panel as on sapphire website. john

Hello! I'm in the process of building a home alarm that consists of the G2-44 Panel and I'd like to know a couple of things: Provided that I have installed a RF Portal, 1. Will this Glass Break Detector that Securitywarehouse supplies (Model: DOM-BG- work with the Galaxy system? 2. Will the KTC 805 keyfob work with the system? If I'd like to purchase the FlexGuard Glass Break Detector and Magnetic Contact (model FG-1608T) as well as the TCB8M Keyfob would it be possible for Securitywarehouse to order them? Thanks! Looking forward to hearing from you.

I have an old, very old alarm system! It uses a 4 wire CCL configuration which operated relays in a hard wired system. I would like to upgrade so that I can update/upgrade with a few more detectors. The Homelink 55 system appears to fit the bill as I reckon I could use it with my existing hard wire detectors and allow me to expand into new areas without doing more hardwiring ( add a few PIR's). As I get my neighbours to check out the house and feed the pets while I am on holiday I like to keep entry/exit operation of the alarm system simple. The question . . . can you utilise keyfobs into the Homelink 55 system giving the custodian a car remote type ac…

hell guys i need some info can ssaib take my certification for 1 complaint against me regards

I have to purchase the following equipment for a new house which already has cabling installed for an alarm system. 6 x Dual-tech PIRs (because of the geometry of the rooms some of these will be facing a window, which I can do nothing about) 1 x Door contact 1 x 8+ Control panel 1 x Keypad 2 x Internal sounders 1 x External sounder 1 x Bell box Plus anything else that will be required that I've not mentioned. I have identified the following:- PIRs - Scantronic 460; Honeywell Intellisense DT7550A & Eurosec V40DT Control panels (& keypads) - Scantronic 9651EN-43 & ADE Accenta MetalGen4 with LCD keypad (8SP419A) Are you able to:- 1)say which of…