Jump to content
Security Warehouse Support Forum

Secware_Tech6

Administrators
 View Profile  See their activity

  • Posts

    256

  • Joined

  • Last visited

  • Days Won

    14

 Content Type 

Everything posted by Secware_Tech6

  1. Secware_Tech6
    Stuart, its a forum. If you want to link to ur ebay link then fine.
  2. Secware_Tech6
    Yes id go with the large mag knight multi
  3. Secware_Tech6
    Direct wiring do you mean built in eol? I wouldn't recommend any flush contact at that gap on a steel door. The magnets cant be big enough
  4. Secware_Tech6
    It will be an accenta sl?
  5. Secware_Tech6
    It could be the cable, the handset or the module. Have you tested all the cables are in tact
  6. Secware_Tech6
    Yes have a look at the takex active beam detectors
  7. Secware_Tech6
    You can use a wired sounder on that panel. In fact I don't think they male a wireless one.
  8. Secware_Tech6
    no the g3 and the dimension are different pcb's. Ive never tried flashing dimension firmware onto a g3.
  9. Secware_Tech6
    If its just a low battery it wont be going off outside
  10. Secware_Tech6
    Use the siemens grade 2 dualtec. Is it an accenta mini? Screened will help yes.
  11. Secware_Tech6
    The 6v battery is wrong and I don't think the dimension tamper will fit a flex, but is required for grade 3 only. Wireless is currently grade 2. There isn't a compatible wireless sounder.
  12. Secware_Tech6
    You can ip cameras to the Siemens Vanderbilt panel. But you will still need an nvr.
  13. Secware_Tech6
    A picture would confirm it. Are you sure its the Pir not the switcher?
  14. Secware_Tech6
    Not that I know of, you will need to add a double pole relay
  15. Secware_Tech6
    Similar but no there are some differences.
  16. Secware_Tech6
    Just change the dip switches on the head.
  17. Secware_Tech6
    They do on the wireless peripherals. But I've never used a non uk panel so I don't know
  18. Secware_Tech6
    Yes but iirc this already built into it.
  19. Secware_Tech6
    How is the unit connected?
  20. Secware_Tech6
    No I'm afraid not
  21. Secware_Tech6
    Depends on your system load. What's its standby current?
  22. Secware_Tech6
    Record remotely? The sw units can via the cms software, look in the user options.
  23. Secware_Tech6
    id say you have a faulty keypad then, let returns know ur order number etc so it can be replaced
  24. Secware_Tech6
    I'd verify the switch is closing and doesnt need an adjustment. Does it clear if you push the switch manually
  25. Secware_Tech6
    Is this a keypad tamper and not a tamper in the panel etc?
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept