Fire Alarms & Emergency Lighting

Please register for a login for the Forum at http://www.securitywarehouse.co.uk/forums/index.php?action=register You will then have access to post questions. To post a new question, navigate to the area you wish to post your question and select the 'new topic' button towards the top right of the screen. Give the post a relvant title and enter your question / comment in the main area and press 'Post' Any questions then just email us at technical@securitywarehouse.co.uk

Can this Texecom Speech Dialler work with an Aico fire alarm system, if connected by the Aico Ei428 relay, (which has a switch triggered if the alarm is raised by the Aico sensors fixed around the house)? 2. Can you recommend a UK monitoring service which offers to take messages from this product and act on them? Texecom Speech Dialler [CGA-0001] - £135.06 : | Best Price Promise | Security Warehouse Professional products

Hi, I am working on refurbishing a building to become a small commercial gym in Crieff, Perthshire. I want to install a fire detection system, I’d need two break glass manual panels and then a number of automatic detectors with sounders. The ability to have an alert sent to my phone as well would be advantageous. Is this something you can help me to specify and also is it something my electrician can wire in?

Can I use the 16way 20amp power supply unit for strip LED lighting which we are fitting in our church auditorium?

I have been looking on your website for some standalone smoke/heat detectors for use in a boiler house. Could you confirm that the relay output is volt free and can be used to connected to remote PLC digital input card (24VDC). Aritech Photoelectric Smoke Detector with c/o relay output Do you do a range that is more suitable for an industrial installation like a boiler house? It has to be standalone and dual heat and smoke and have the facility to repeat the alarm remotely via a relay output?

Hello, I'm hoping you can assist with a product enquiry. I'm looking for a device to detect the start of a lithium battery fire. I'm keen for advice on if heat and/or smoke is best for this use case. The power available is 24v DC and I'm hoping the sensor will have either a repay or some sort of output I can connect into a monitoring PLC. many thanks,

When installing the 205 0001 to a Sita 200 plus panel, can this be installed without software being required?

I recently purchased a Aritech photoelectric smoke detector with c/o relay output DP721R, I was wondering if you could recommend a suitable testing kit for this particular detector.

i have SD1+ speech dialler and would like to connect this to my fire alarm panel would you be able to assisst me

does the Honeywell ECO1003-A require an eol resistor?

I want to fit some wired smoke detectors to a Galaxy Dimension pannel. Considering Texecom Exodus 4W or Menvier M12. Would you recommend one over the other? Can you explain the difference between Texecom OH with and without N/O relay?

Hi We have an alarm / fire detection combination system installed and I need to add two smoke detectors and one alarm door contact. I have found the smoke detector. Menvier M12 4 in 1 Smoke Detector for Intruder Alarm Do you know what door contact goes with this?

Do you have a wireless smoke detector with a remote sounder that I could use as a separate system? I need it for my detached garage which is some way from the house and am worried that I might not hear a standard smoke detector at night.

I can not connect the mct-427 to the power master 10. No id for the units in the boxes and when using the instruction of holding down the test button during enrollment in the main panel nothing happens. is this detector compatible with the power master 10?

Hi All, I have just moved into my 1940's semi and now on a journey to turn this beautiful house into the automation house I've dreamt of. I have read a lot on this forum and other websites, and my head is about to explode with information that is not relevant to me hence this post. I am after your advice on two projects - an intruder alarm and external security lights. 1. Intruder Alarm The requirements are: - Sensors (i.e. Heat/PIR) downstairs (Lounge, Hallway, Landing and Extension) - Contacts for windows (Lounge x2, Extension x2) - Camera (Lounge x1) - A Panel (position in the Hallway) - A Main Unit (positioned Upstairs) - A Sounder (positioned ext…

I have purchased a Menvier M12 4 in 1 Smoke detector and now need to try and change the head of it to just a heat and not smoke sensor, as it is located in the kitchen. Please can you let me know if you sell in the same style and size a heat only sensor and if it is possible to simply change the head from the one detailed above to a heat sensor one? If Menvier do not make a heat sensor in this style, do you have one from another supplier which would screw onto my existing Menvier smoke detector body which is already wired in? Thank you

Hi, We have the below smoke detectors set up in a property we manage and I was wondering if there is a carbon monoxide + smoke detector with which we can replace the units in the kitchen and plant room with and will connect with the rest of the system? Menvier/Cooper M12 4 in 1 Smoke Detector for Intruder Alarm

Hi, I'm interested in buying a complete intruder alarm system based on the Honeywell Flex 20 panel. I want to include a smoke alarm, probably the Honeywell ECO1002 combined photo/thermal unit and connect it to the intruder alarm system. Should I buy a latching or a non-latching base? I'd like to place the order today if possible,

Hi, I have installed a Visonic PowerMaster 10 with 2 x external & 1 x internal siren, and also a GSM module for notification/alerts (all purchased from yourselves). I would like to connect a SMD427 PG2 Smoke & Heat detector. Please could you confirm that it is possible to configure this system so that when Smoke or Heat is detected, the device itself emits sound but NOT the external sirens? And that a call/text also be generated via the GSM module? (to clarify, it is not desired that the external sirens will sound upon detection of smoke or heat but internal sounds are fine, also desired that remote alerts are generated - hope that makes sense) Thanks

will Apollo heat detector/mcp/optical work with an c-tec cfp704-4 panel. have an existing system but panel is only 2 zone and we require 4 zone and extra detection.

I have been recomended a Redwall LRP404S motion sensor to connect to a light so we can light up our entrance gate when it is opened. They have told me we will need a Redwall interswitch as well. Does this make sense to you and if so do you know which switch suits this light and do you sell them also and for how much.

As requested please follow links below to the 4 zone fire panels currently available online: http://www.securitywarehouse.co.uk/catalog/esp-fireline-4-zone-fire-panel-poly-p-1487.html http://www.securitywarehouse.co.uk/catalog/ctec-cfp7044-4-zone-conventional-fire-panel-p-1301.html http://www.securitywarehouse.co.uk/catalog/ctec-cfp704e4-economy-4-zone-conventional-fire-panel-p-1304.html http://www.securitywarehouse.co.uk/catalog/fike-4-zone-twinflex-plus-control-panel-p-1312.html regarding the 2 outputs please descibe what the outputs would be for, to be able to help further?

Hi Please quote me on a Fire Alarm system to go in a split building where they require 2 separate panels which will talk to each other. Each panel to have 4 zones and 2 sounder outputs. 12 smoke detectors 1 heat detector 8 sounders with strobes 5 break glass units 1 4 zone panel (other one to be purchased at a later date) 5 Door magnets and power supply to work with fire alarm

Hi, I know C-Tec make a Fire Alarm Bell Sounder REPEATER which allows for additional Bell Circuits to be wired into a fire alarm panel. Q) Do you sell such a product or simular

I AM BUYING A APOLLO 65 SERIES OPTICAL SMOKE DETECTOR W/ DIODE BASE FROM YOU AND I NEED THE WIRE TO CONMECT THE DETECTOR TO THE CONTROL PANEL BUT DONT WHICH KIND OF WIRE THAT I NEED