Jump to content
Security Warehouse Support Forum

Secware_Tech6

Administrators
 View Profile  See their activity

  • Posts

    258

  • Joined

  • Last visited

  • Days Won

    14

 Content Type 

Everything posted by Secware_Tech6

  1. Secware_Tech6
    You need a duct grade cable or swa if burying.
  2. Secware_Tech6
    The red led is the activation (ie relay) indicator and the yellow is the microwave. All indicators should be off when there is no movement
  3. Secware_Tech6
    Please whoever is reporting content about this topic you need to reply not report
  4. Secware_Tech6
    What signal strength readings are you getting?
  5. Secware_Tech6
    I'd soak test the sensors and cover them over to rule out something in the room. Are they still alarming?
  6. Secware_Tech6
    I wouldnt have thought so but possible. Are you in a noisy rf area?
  7. Secware_Tech6
    Does the system currently have wireless fobs on it?
  8. Secware_Tech6
    we cant discuss defaulting in the open forum. I doubt they are related, are they normal alarm events or tampers, missing etc.
  9. Secware_Tech6
    Have you adjusted the range down, set for harsh on Pir and mic? What pet mode is it in? And can the cats get within 6 Ft of the detector?
  10. Secware_Tech6
    i dont think so, im sure you need the servers etc. The siemens panel can be connected to directly via up or using the spc ddns service
  11. Secware_Tech6
    I don't know what you mean by a call sender? Bellbox use a cqr multibox best sounder currently imo
  12. Secware_Tech6
    Have you followed the rf enroll procedure fully?
  13. Secware_Tech6
    If it's on it's pwn circuit then use the non latching base.
  14. Secware_Tech6
    I'd recommend the siemens eline Pir range and knight door contacts
  15. Secware_Tech6
    The 9930 is a keypad not a control panel. You need to know what radio Rx system you have.
  16. Secware_Tech6
    A master blaster would work in this situation but I'd advise getting someone to do it. Our equipment is professional gear and not designed for diy use
  17. Secware_Tech6
    As above if you don't need cams integrated into the same app then the dimension is a good panel
  18. Secware_Tech6
    No you can't on a basic system like this, you would need a more flexible siemens spc or Honeywell dimension
  19. Secware_Tech6
    If authorised pro installer then the hkc has the best app support.
  20. Secware_Tech6
    Yes they will you can adjust the beam interrupt time. What do you mean by phone card dialler?
  21. Secware_Tech6
    The only control panel that I know that can easily do that is the siemens spc range.
  22. Secware_Tech6
    Iirc the 6 wire keypad is no longer available. I would advise a replacement as id guess yours is well over 10 years old.
  23. Secware_Tech6
    No it has to show. What if it was a rear door and had been left open. Its only reporting it is activating it does not affect the exit procedure
  24. Secware_Tech6
    Non of our equipment is designed for diy installation. For that you need to use b&q etc as these supply the low security easy fit products
  25. Secware_Tech6
    Use an enersys 2.8 but it does depend on the system load. What is your standby current on the system?
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept