Intruder Alarms

I've been looking on your website and I've seen 2 products I'm interested in: ADE Honeywell Accenta Mini Gen4 with LCD Keypad. One has a product number of: 8SP400A @

I'm interested to buy from you a complete set of alarm system for my house. i want it to consist from a good expendable control panel so i chose the scantronics ion40. I'm building a new house so i did all the provisions needed for wired installation. my system will consists of: 10 magnetic contacts for doors/windows 5 passive infrared detectors 2 smoke detectors 3 keypads 1 internal and 1 external siren The thing is that i'll try to install it myself so i'll need help as much as possible. -when i buy the ion40 system it comes with 1 keypad already and i'll have to buy 2 more or is something different so i must buy 3? -i read the specs of ion40 and is only sup…

we are looking to fit a wireless alram to a five bed house where we will have 10+ zones, would like a keypad by the main door, so need one where the main control panel can be more like an end station. would also like to be able to control via mobile phone when away. which good quality system would you recomend

the keypad on my scantronic 7400 alarm system is not working do you have a replacement one in stock and if not do you have anything compatable that could be fitted instead

Hi! Bought a Visonic Powermax+ alarm from you and have run into some problems regarding master installer code and installer code. The problems shows on both the central unit and the keypad unit. When I installed the alarm, I (of course) changed the default codes to my own. However, as far as I can remember I only changed 2 codes where off one being the user code and the other one either the master installer or the installer code. Now I can't seem to access the alarm using the other alternative of installer codes. I would be glad if you could give me some hints to where I've gone wrong. The setting and fault behavior right now are as follows: 1. When first changi…

I purchased a Aritech 4 zone analyser from your company to find it does not work correctly i.e you can bang on the window HARD around 20 times and the analyser will only just trigger and that is on max sensitivity. 2nd i never got instructions with the unit just wiring diagram and also your advert on your website tells you so many things that this unit will do but clearly it wont like pulse count adjustment and LED indicator. The only unit which does all this is the single channel GS615 which i have used for 15 years. Can you please tell me where we are to go from here as i need a working system and you seem to be the only people who sell 4 zone. Could some on…

I have a GardTec eurosec cpx control panel with wireless add-on and GardTec G-Tag keypad. If I buy a Risco Wisdom 2 Button Panic Keyfob, can I program into the system myself with User 1 access and not engineer acces??

Hi I am trying to buy a scantronic 515r radio pir can any body get these still or have any idea what I can do.

Hi iv recently bought a 4 zone shock anylser from you and iv found the varible resistor to adjust each zone but how do you adjust the pulse count.

I need to replace a PIR on my 500r+ system. I've got 515r PIR's and notice you've got 520r PIR's "compatible with 500r+" so it looks like that's a reasonable replacement. Can you confirm that it would be a viable replacement, operates on the same frequency etc.

I am tring to select an alarm with the following requirements: Up to 8 zones LCD keypads (1) Proximity tag capability (prefer it built into the keypad) Easy to use Autodialler capability preferred but not essential (can add standalone autodialler) Reasonable cost The panel will be in an obscure location which wont be accessed regulary (no need for buttons) so will be controlled/programmed by remote keypad/fob Please advise which items would be suitable

I'm tring to programme the bell time on this panel in engineering mode. When I press "6", LED's 1,2 and 3 should show but I'm getting 1,3,5 and 7 and then it won't go any further. Does anyone know what this means and why it is happening?

I have semi decieded to purchase/install an MDT alarm system and will be connecting a stand alone autodialler also I have used Texecom speech only recently but am curious if there is an easier to use alternative available? Do all autodiallers require you to record a message during installation or are there variants that come with pre recorded messages? Thanks in advance

Hi! I can't figure out if the wireless siren MCS 720 are compatible with Visonic PowerMax+ or not? Does MCS720 work with PowerMax+?

Need external apir sensor with dc input, adjustable on/off times, 180 degrees+ range. Which is suitable.

Can you please confirm this product is a heavy duty door surface contact, approx. size 20 x 80 x 20mm deep. Also that this product comes as a pair i.e. contact and a magnet.

Please advise if you can supply a replacement PowerMax Plus panel (433 MhZ) to Cyprus?

I have a Gardtec 800 system with an 8 way zone expander unit. After a lightening storm the panel comes up with a fault: LEX1 tamper. I believe this is a line expander unit fault. You are selling a Gardtec 02083 Zone expander unit - is this the same as the line expander unit I have (label with EX MO1/11 EN50131-1 PD 6662 G3 EC2 PR5705 Rev 1.0 4390) I would appreciate your help.

Does the Texecom SPEECH DIALLER Text Alerts system send texts directly i.e. when the intruder has already cut all the BT lines & broadband etc, will it still work - does it have a SIM card?

hi i am after a texecom 24 1xd expansion module, do you sell these as you only show the 60 version

I have a few PowerMax questions that I hope you can help me with: - Which frequency band is PowerMax+ and PowerMaxPro operating at? - How much is it for the PowerMaxPro unit (incl. GSM and Powerlink) together with 2 x keyfobs, 2 x smoke detectors and 2 x motion detectors? - Is it possible to connect a Powerlink and GSM module to to the PowerMax+?

I am trying to get hold of a morley key fob for working electric gates and access doors in our apartment block. The reader is a Morley TM4 Series. Please can you let me know if you have these in stock or alternatively another key fob that is compatable with the reader. We need 6 key fobs. Thank you

i would like to buy a Elmdene Grade 2 Flush Contact do i need to get the one with purple resistors to be compatible with my risco system or would other resistor colors work thanks

could someone please recommend a backup ower supply suitable for the Risco Gardtec Eurosec CP8L

Does the Scantronic 9651 EN-43 have a proximity remote keypad, if so does it come with any proximity tags included? Thanks