Intruder Alarms

i have recieved the Sterling LCD keypad today it looks like i have been sent the latest LCD pad and my pad is approx 7yrs old. Is it compatible?

I am looking to alarm my workshop. It consists of 3 rooms currently with plans to add another room in the future. There are 2 up and over doors, 1 standard access door and 1 double split opening door. 2 of these doors will be entry points with a keypad located close by. Only one of the rooms has a window. There is a cat flap in one of the doors for pet access. I have been looking on your website and come up with the following list of products for the system based around a Honeywell Accenta G4 Mini panel. I chose this panel because of price and expandability. Can you tell me if all the items on the list below are compatible ? Is there anything missing from the list that I …

I would like a wireless single PIR, single door, telephone dialing warning unit with small key pad for a 2rd floor two bed flat. Ideally I'd like an internal and external audible siren but would settle for either. Scantronic have been recommended. Any ideas on what to buy rom you please?

In your opinion,which pet PIR tends to work the best and is more reliable for a wired system.I have looked at Bosch,Honeywell,Visonic and Texecon but info is not conclusive.Thanks

Does this come with a battery ?? If not, which one do I need to order for it. Which Remote keypad do I need to order for it.

What battery is needed for the 8EP396A-UK?

I am looking for a wireless alarm with 4 sensors, 2 door contacts, 2 keyfobs and an autodialer, can you let me know the cheapest one you do please.

Does this unit have a double pole switch over or if not what is the price of the same unit with double pole switch over.

Can you suggest some compatible, either a wired or wireless Panic Attack alarm for the purchased Secware Optima

I have installed, approx 9 years ago, a scantronic 500r.+ system and have had the remote control stolen during a break in. My fear is they will return. Is it possible replace the control box with a new one in order to make the remote U/S, Or is it possible to disable the remote. I have 4 PIRs one door sensor and a remote key pad. Sorry I have marked this high but having just lost a new car do not wish then to re-visit disble the alarm and clear the rest of the house. Thank you for your time.

I have a domestic Itec Horizon alarm system with shock sensors wired on every window and door sensors on the front and back door. The systen does not use PIR's. The main Horizon box has developed a fault and I understand these are quite old now and no longer available. Can you tell me what a modern equivalent system is that would be compatible with the existing installation - ie the window and door sensors and the price?

can these Honeywell Intellisense DT 7450 pir be used in conservatories or can you reconmend one. I am working on an alarm that has a pir in the conservatory but it keeps going off.

I wish to order the following, can you help me ? 1x Texecom R8 plus + battery 3x Keypad (normal, no lcd) 1x indepedent Bell for inside + battery 1x indepedent Bell for outside + battery 2x Heat detector + shipping to France Thank you, very much (No need of PT wise i have already in stock ) Well, So i have 2 questions : i don't find any bell that are independant with battery, can you tell me a reference for one outside and inside ? For heat sensor, do i need RELAY version or not ?

I am assembling the individual components of the Optima 4 kit minus the SAB strobe. I am substituting the Odyssey 3E, as I already have the diamond shaped cover. I have found all the components but not an exact match for 2.1Ah battery and surface door contact - could you advise which battery model and which surface contact model I should order?

how do i clear an error - it states z03 alarmed - living room and says 'alarm in memory'. i also have a s01 tamper/open error [its the back pin i think - box is fixed back to pebble dash wall and the pins clearly not pushed in.] - not sure if it can be adjusted - instructions arent that clear... if i sort out the external box, will this then clear the issue/problem i have with the living room and allow me to set the alarm??

Hi I am wanting a No. 1 biscuit for a Karizma Plus alarm. Are the ADE ID biscuits 1-10, red, the ones which I need? I only have 10 access points at the moment and have no plans to add more.Thanks

I bought the cable mentioned in the subject line this week and have the following technical question: Can the cable be used as telephone cable, please? Any information would be most helpful.

Can someone tell me if the Pyronix KX10DP from SecurityWarehouse does work also in The Netherlands? Need 5 pcs. thnx!!

I want to purchase 5x Pyronix KX10DP from SecurityWarehouse. But can I use them here in The Netherlands? Are they compatible with the ones sold here?

Could you advise please, I need a replacement vibration sensor to replace a Shockgard sensor, it looks like the 2t. It has 12 v supply and latch control and works on a Rascal Panel Are these still available or is there another unit that would act as a replacement

I live in France, and I have several questions about the kit Visonic Powermax Wireless Sounder Quickfit Kit: \\\" Visonic Powermax Quickfit Kit (inc Wireless Sounder):

I am looking to purchase a replacment alarm panel mainly "ADE Honeywell Optima Compact Gen4" I need to know what battery fits this unit please, I have tried reading the specs and can find no mention of the requested information being listed.

I've been looking on your website and I've seen 2 products I'm interested in: ADE Honeywell Accenta Mini Gen4 with LCD Keypad. One has a product number of: 8SP400A @

I'm interested to buy from you a complete set of alarm system for my house. i want it to consist from a good expendable control panel so i chose the scantronics ion40. I'm building a new house so i did all the provisions needed for wired installation. my system will consists of: 10 magnetic contacts for doors/windows 5 passive infrared detectors 2 smoke detectors 3 keypads 1 internal and 1 external siren The thing is that i'll try to install it myself so i'll need help as much as possible. -when i buy the ion40 system it comes with 1 keypad already and i'll have to buy 2 more or is something different so i must buy 3? -i read the specs of ion40 and is only sup…

we are looking to fit a wireless alram to a five bed house where we will have 10+ zones, would like a keypad by the main door, so need one where the main control panel can be more like an end station. would also like to be able to control via mobile phone when away. which good quality system would you recomend