Intruder Alarms

my customer has a accentra mini 8 alarm system, the external sounder appears to be faulty. Can you supply a replacemnt sounder. If so can i replace old with new wire for wire without instruction? The existing sounder has security alarm with a man climbing through a window logo on it. hope this helps?

In november i bought a texecom bell box off you and its just stopped working. the rest of the alarm is functioning fine. when enter the eng code, the 05,54321 to test the sounders everything except the bell box works. it was working fine, so could i return it please unless you can suggest something to try? all the wires inside are firmly connected.

I would like to order some Bosch Blue Line ISM-BLD1 TriTech Blueline Detector. These are available in three frequencies. I'm interested in the 10.525 GHz ISM-BLD1- F1 model. Would you able to supply this model ?

How do you loop wire two Honeywell Intellisense IS215TCE PIRs into one zone when using a ADE Honeywell Accenta Metal Gen4 control panel?

Hi, I am going to replace my 23 year old system, and wnat to know if you sella kit, with : a control pane and key pad, and internal siren, an external siren, 3 pir sensors, wired, 5 wireless door sensors please ? How much, if you do, and do you have brown door sensors ? Then, how difficult is it to set the wireless sensors up please ? Cheers. Alan.

Risco Wireless Wisdom Kit 6 Wireless Devices could please send more details for the bell box is it totaly wire free

Hello. Interested in installing an alarm system. Such as Electronics Line Infinite Wireless Kit can you tell me if i can change options and replace the PIRs for Door Connectors? Does the external box sound and is this wireless too? Basically what I want is wireless system, 4 Door connectors, outside box, GSM to alert of event.

Hi, Can I please ask for some help on choosing a new alarm system for my 4 bed semi house with a garage on the side. The garage has a flat roof and there is a new flat roof extension being built at the back which will give access to 2 bedrooms. I have a living room at the front and a study on one side. The open plan kitchen/diner will have large folding patio doors at the back. The house is being completely gutted so hard wiring is not a problem and I have builders and electrician in at the moment re-wiring the place. I have been told about the Scantronic 9651 and 9751 systems and i would like a bell on the outside with LED lights and a number pad that can be cont…

I require a flush door contact to be fitted to a wooden door. Can you please recommend a product? As I am confused by the terms \\\'Grade 3\\\' \\\'Grade 2\\\' and \\\'Green Resistor\\\' \\\'Red Resistor\\\' I will be purchasing the Scantronic 9651 (not sure if that makes a difference)

I am also looking for an internal siren. Would you be able to recommend one suitable for a three bedroom house?

we would like to fit a wired Alarm system, we have made the following list of items We like the look of the scantronic 9941 box as we would like to put a TSD2 speech dialler on so that we can telephone and check the system remotely. > > We would then like to put a remote keypad in the porch area at the front of the house which we would like to have night set options. We would also like to have a personal attack button and maybe a keyfob to de activate the system. We would like an internal sounder but maybe this is built in to the system. > > We would like a siren and strobe sounder on the front of the building. > > Detection Points > > …

Is the yussa NP 2.1-12 is the correct battery for the Accenta Mini gen 4 and will it fit within the case of the alarm panel? - prior to confirming an order

Having had a Texecom R8 installed since 1996 the only thing that has now failed is the "5" on the Keypad, so I have replaced the old one with new 2010 version. The swap out has worked fine, but the Red Zone 1 & 3 lamps are on all the time, I have check the wiring and all is OK, and I have done the the scan for Keypads "0 9" from the new keypad, all appears to be OK, but the the Red Zone 1 & 3 lamps remain on (on the keypad) Date stamp on the Main box is also 1996, so is this a backwards compatabity issue with the new keypad and the old main box?

I have an existing system with a Scantronic 500+ control panel but have no instruction manual. I know the access code but I don't know the engineers code or anything else about it. I have replaced all the batteries in the system but have triggered the Tamper alarm and I don't know how to reset this. If I replace the existing control panel with a new 500+ then: 1. Can I programme this with my own engineer code and entry code ? 2. Can I use my existing PIR's (Type 520r) and keypad (Type524r) ? 3. Does the instruction manual contain all the information I need to do the above ? 4. Is there a simpler solution to my problem ? Thanks in anticipation of some good advi…

I cant seem to find the following items on your website. 2x Texecom Ricochet Wireless Magnetic Contact -W - GBC-0001 4x Texecom Ricochet Premier Smartkey Wireless Iconic Keyfob 1x Wilress Receiver 32xp Can you source these items?

Maybe unwisely, I have bought a used SD1+ Speech Dialler to replace a twelve year old model that failed to respond to all the helpful advice you gave me back in February. I have carried out a factory restart, as described in the manual, and have created a 'NEWCODE'. However, when I try to program telephone numbers from 'READY' and press'ENT', the LCD still shows 'READY'! Again from 'READY', if I press 'O' 'CLEARBY' is indicated. But pressing 'B', 'CLEARBY' still remains on the LCD! Please can you help me!

I ALREADY HAVE A VERITAS 8C SECURITY PANEL FITTED AND EVERYTHING WORKS FINE APART FROM THE BUTTONS. THE NUMBERS HAVE ALMOST RUBBED OFF AND SOME BUTTONS ARE NOT FUNCTIONING PROPERLY WHEN BEING PRESSED. MY QUESTION IS ...IF I PURCHASE A NEW VERITAS 8C PANEL FROM YOU CAN I USE THE FRONT PART OF THE NEW PANEL TOGETHER WITH THE BUTTONS TO REPLACE THE OLD FRONT.

I have purchased the Powermax+ from you last year. Am redoing the electrics in my place and rolling electrics to my cabin. Was wondering how I can connect my cabin to this alarm. Is there a way of connecting a PIR via a cable?

ADE Honeywell Accenta Mini Gen4 with LCD Keypad does this come with an internal speaker? If not, how can i order an Accenta with an internal speaker and LCD remote control panel

Hi, I'm interested in purchasing your product 166/173 (Visonic MCM-140). Before I do can you tell me if this is the 868mhz version?

I am replacing my old alarm system. I have done some research and it appears Scantronic are a good make in terms of functionality and reliability and come recomended from a colleague who has installed them previously. I have a wired sounder at present and want to maintain the wired asoect if possible. I'm looking at: i-on16 Control Panel (1) 714 Wireless PIR (6) Wireless door contacts - brown (2) Compatible wired sounder or the wireless one for i-on16 Please advise if the above are all compatable and what is my best option for a sounder. Also would the wireless PIR work in my detached garage? It's approximately10 metres from the control panel location.

Just instaled the panel, remote key pad and sounder and pirs. Firstly the instructions didn't match the sounder terminals with the panel but I think I may have sorted it know but the proble I have is as soon as I connect the sounder battery jumper the sounder goes off this happens with the panel wired and powered on fully disconnected from the panel. I have the system up and running if I put itI into alarm I get nothing from the main sounder sound or strobe but the sounder in the remote key pad sounds Please can you help?

Can you help with my optima compact 8ep 396a? When setting the alarm i cannot set a program ie part set( prog 2 ) it defaults to prog 1.

Hi, I'm after some advice on my Accenta G4 system, as with most good DIY project a purchased it a few months ago and only reently got round to fitting it (a wedding got in the way). Anyway i've installed it and powered the system up and two issues occur. 1) There is no power on light on the system or the key pad (or any light on any of the sensors). 2) Although the key pad (and alarm) operates (i'm assuming from the battery), when i enter the security code on the kep pad it says tamper lockout. Now i can accept that there may be a tamper fault somewhere but i wondering first whether its all related to the power problem and whether there is perhaps a f…

Do you sell the base for the Honeywell Thermal Smoke Detector ECO1002?