Secware_Tech6

We are currently evaluating a new anpr system, i will update this if approved for listing. SUpport

as above 17v is way too high. If you enter the correct code what does it display if anything? Its not armed is it? Support

ASD a soundbomb is a switched 12v unit so no. The extention speaker outputs are for just that a speaker. You would normally wire the soundbomb between bell trigger and a perm 12v + Support

Surinder The homelink 55 is hybrid but the 75 is wireless only. When you say 'wired led bellbox' do you mean a full wired bellbox or just an led? Support

The battery is a 3.6v one, the image is a generic image. Support

Drinu We recently removed shipping to malta due to the very high shipping charges. If any of our customers would like this service back if they can let us know i will see what we can do. The price rise as i understand it for shipping to malta was IMO too high a rise. Support

asd Yes. But ensure you get intruder alarm smoke sensors from the intruder section not fire sensors from the fire section as they will only function on a 24v fire panel. Conventionally fire (24v) systems the bases are seperate. With intruder (12v) based systems they are included. The menver m12 and the texecom units do include the base. Support

The powermax is a fine system but on a personal note if i could get a wire there then i would. The powermax will be an easier install and program. Hybrid panel the scantronic homelink or the galaxy 2-20 kit would be the ones to look at. Support

Yes it should but i would confirm the freq of the devices you have. SUpport

It is yes but if your ata ll unsure you should use the services of a pro installer. SUpport

Andrew 1. Yes they are G2x panels 2. Yes 3. Id recommend the texecom as it has by far the best manuals. The 9651 has the most features though. 4. Yes but they are not as loud as a dedicated sounder. Pir wise id recommend an optex unit but the units you mention are fine.

Sounds like you have faults on cctc 7, 7 and 8. Support

All crelevant contact infoation is on the site. Also prices are listed on the site. If we dont stock any parts then I can ask sales to look at stocking them depending upon what they are etc. Support

on en panels the default is to require a user code to give an engineer permission to access the panel. This can be disabled. If disabled then the panel will do as you describe. If not then it wont. But if your concerned avoid the 9651 for now. FSL is far more secure and allows both alarm and tamper to be sent of a single pair of wires, where as cc requires 2 pairs.

The above issue only arises if a the the engineer code is known, and if user permission to enter engineers is disabled. By default the panel does not do this as you need to enable engineer access before the code will function. But for non EN jobs id recommend the honeywell panel. Support

I will pass it on. Its not a stock item but they should be available from the middle of next week. Support

its usual only for devices from the same manufacturer to match up etc. If you have a look though in the sounder manual it does list what you need.

1) Yes but it is called double pole. ie a set of contacts for alarm, one for tamper and another for power. To mount any sensor to a caileing you will require a cileing bracket. Some do come with a free non compliant one (ie you can move the sensor without it going into alarm) or you would need to purchase an additional cileing bracket. 2) as above 3) Yes this sounder has a strobe, comfort leds and a sounder. Support

The battery size needs to be calculated by using the system standby current.(measured using a multimeter) So for example if your system has a standby current of 0.3A and you need a 12 hours standby time (Grade 2 EN regulations minimum standby time) 0.3A * 12 = 3.6A you also need 30 mins in alarm so if alarm current is 0.8A 0.8A / 2 = 0.4A 0.4A + 3.6A = 4.0A add 10% for battery aging over 5 years 4.4 A so the minimum battery size in the above example is 4.4A/h There isnt a 4.4 so you would pick the next available size up. In this case a 7.0A/h battery re the speaker any 16Ohm speaker is suitable eg http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=662 Support

As a general statement Yes

The Uk model is an older software version and some of the options are different. Many people (non approved installers) prefer the UK version as its more end user friendly in operation (ie EN regs have stringent requirments for acknowledging events etc) The eu model is the new one and technically the one we would advise.

i wouldnt say we have a problem with these units, and we have tested them on BT lines. Som elines have leastcost routing that take too long to connect, some non bt lines have less than 50v and the dialler wont pre flash, I would disconnect all the other eqp on that line and see if that helps, as you could have an old phone etc causing you problems.

As long as your caling back your backup requirements then id look at an optima in a large poly case. Basic panel but will do your requirements you could always add a dialler/text unit to report ac fails

it is achievable but batteries for alarms are designed for standby use. If you regularly have long powerfails it will damage the battery but you basically need to calculate your standby time from your normal quiesant current for example assume your system has a day mode current of 0.2A 2 weeks = 336 hours .2A * 336 hours = 67.20 Amps Thats a big battery even if you got the day current to .1A thats still 34 A/h battery The largest battery a galaxy (for example) will charge is 17A/h Its doable but i think you may need to rethink or build something that is very low power (ie a relay) is using a 17 A/h battery and a .2A day mode current the best you will get is 85 hours standby. And you will have to derate your battery for teh colder weather.

Amber I personaly have not tested any text unit on the bt message centre. I have checked with the manufacturer and neither have they as its designed to use the 02 message centre. Support