Jump to content
Security Warehouse Support Forum

Secware_Tech6

Administrators
  • Posts

    242
  • Joined

  • Last visited

  • Days Won

    12

Everything posted by Secware_Tech6

  1. what indications are present during power up and do you get any beeps relating to each keypress. are your powering mains or batt first and is the power up clean ie switch or fused spur?
  2. yes that looks correct. the strobe can either be connected through one of the relays or connected with the bell - to follow the bell. Support
  3. if you disconnect the circuit wire to the pa connections in the keypad and leave engineer mode what's the result?
  4. Attached is the wiring diagram you need to connect the tamper return from your bell to BELL TMP Ensure you have got the holdoff supplies from the aux connectors not the bell as the bell- is switched
  5. Neil The rafiki system is a 2 wire system. Id advise you have a good read through the system spec sheets but All devices sit on the 2 wire zone cable. This allows relay modules, sounders, call points, smoke detectors etc to be on the same cable. Yes Yes Yes Upto 85db on High As a stand alone higher output sounder
  6. Una I hope one of the members can assist here but if you have lost your key (this is to allow you to open your safe if your batteries go flat) then i think thats it. Id advise you contact a local locksmith or see if any of our members can help with a site visit. Support
  7. Peter If you look at the scantronic watch buttons or a pendant transmitter these would seem ideal. But not all transmitters will function on all receivers. If you need a watch tx then you will need a separate wireless receiver for this. http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=526
  8. Im Sorry Chris our stocks were exhausted some time ago.
  9. Be careful to checkk what the rfx rx supports. Unfortunatly andy the 701 isnt supported by the rfx. The only way to interface this is to use a standalone rx and connect that into a spare zone. Support
  10. Actually the simple set has 2 modes of operation As specialist says where the outputs are wired into inputs to keyswitch arm etc, but they can also connect on the keypad line of the accenta / optima to allow full interraction without using inputs. Support
  11. I can only speak from personal experience when it comes to recommeding panels, but the galaxy is an excellent unit. When you say you use texecom, im assuming you normally use the veritas as the premier is a very capable panel. The G2 range is not as powerful as the G3 or classic range. But yes the items you have chosen are compatible. The domonial RF system that the galaxy uses is very very stable.
  12. I have to agree with specialist.
  13. Sorry Avagi We dont currently import any Bluecherry cards. Support
  14. Subash Im not sure i fully understand the question but if your saying you have had a breakin and your alarm is now not functional id advise you contact the installation / service company. If your upgrading to a bigger panel then as a abottom end panel i can recommend the honeywell accenta range, these have 8 zones and will take lcd keypads http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=864 Tech Support
  15. Id have a word with your engineer to confirm the panel is dead, and they will advise you on the best course of action as they have access to more information than we do here. If you have alimited number of circuits id have a look at the 9851 range. But any panel change is not an easy task. Tech Support
  16. The UK model we stock has the speech module installed.
  17. The 490x is a stock item and is listed on the site. http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=1559
  18. Im Sorry the TS 700 is along obsolete panel and we exhausted our stocks of starburst keypads some time ago. The TS series was replaced by the M series Tech Support
  19. Dan The 207's include a basic copy of axis camera software limited to one camera. There is no way to make this do 3 other than to run the software on 3 different machines. Axis supply a basic 4 camera base pack that allows full recording and displaying of upto 4 cameras. This can be upgraded with 1 channel upgrade packs. http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=1197 Its a very good package. Alternatively you could take a look at the basic milestone package which is a cheaper option http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=1198
  20. Yes the Came Fast P has a locking mechanism. Depending on the gate and security level you may wish to fit additional locks. Delivery times are approx 2 working days to any uk address. Cyprus will take approx 2 more days. Discount coupons are used for offers and credit notes. If you see an advertised offer it will usually have an associated discount coupon. Yech Support
  21. Hi I assume You have done the above and you will also need to enable the keypad pa option Hope that sorts it for you Tech Support
  22. Both those parts are now long out of manufacture. We estimate its 15-20 years old? Nothing currently manufcatured will match your mounting locations but it might be ebtter to send it to us for repair. Alternativly we could custom build a new module. All this depends on the system installed as it may be more cost effective to replace it. Tech Support
  23. Phil If you select a dvr that has alarm inputs (eg DM Eco4) then you can connect a door contact to the dvr and fit this to the rear of the drawer. As you say wiring is impossible so if you use a Scantronic Door Contact Transmitter http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&cPath=36_60&products_id=693 and a Universal Reciever http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&cPath=36_60&products_id=529 You can the wire the reciver contacts into the dvr. On configuring the dvr if you select the alarm type, you can then record constantly and use the alarm log to find the drawer event, or set it to record only when the drawer is opened for a preset time. Tech Support
  24. All of the modern RF equipment is 868 Mhz Tech Support
  25. Martin Id take a look at the Risco Wisdom, homelink 75 or the Galaxy RF kit. The wisdom and the homelink have the benefit of being fully wireless. Bot panels also have 30/32 circuits. Delivery to Ireland will be calculated during checkout time but currently orders over
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.