Intruder Alarms

My wireless home alarm system has been jammed by source unknown. I have reset it but would like to back it up with hard wired system, not susceptible to jamming, for the upper floor of my house. Could you suggest components for such a system. I would like it to include Two PIRs (no need for pet friendly type) A remote wired keypad which can be set/unset easily without keying in a four number code ( I would like to either press one button or use a proximity tag, unless its operation can be jammed) A panic button (unless its operation can be jammed) Outside bellbox with battery back-up (not Odyssey) Thanks

Hi, looking to but the Texecom Kit 2 32 Zone Wireless Kit with Sounder but have some questions. How is the Premier LCDP powered... batteries of PSU? I assume the LCDP is wireless to the main control box? I have a couple of locations I would like to 'hard wire' will any 'standard' PIR be suitable for this? Is it only 4 hard wired channels I can use? Think I need a cover for the bell box with this kit? please point in right direction for this please

Hello, I have a scantronic 500r.+ system installed in 2002 which has been regularly serviced and works as installed. I now have a low battery light for one of the PIRs but the installer & servicer seems to have gone out of business as his phone contact is no longer recognised. Please could you say how to change the battery on the PIR as I do not know whether it has a tamper proof feature or not, hence, if I interfere with the PIR will it set off the alarm? Thanks for your help, Roger

i intend fitting a texacom premier and the client is wanting us to use the flush type keypads . can you advise as to the back boxes we need for these as we need them for the first fix stage . at the moment that will be two into brick and one optionally into plasterboard . can we order these upfront or do they only come with the keypads when ordered ?

Just bought an apartment with the above alarm fitted. At present no one seems to able to give us the access codes rendering the unit useless to us. Is there anyone who can reset it for us and/or give some helpful advice on its use. Thanks, best regards

Hello! I have bought a nice second hand DSC wired panel (PC1864) and is looking for some detectors. I am among other things considering the https://www.securitywarehouse.co.uk/catalog/rokonet-shocktec-with-magnet-white-p-620.html As I understand it this unit does not require any external analyzer card or anything and should work as any stand alone wired detector with my DSC right? I am thinking on using it for the doors on my house - do the main part of the detector in this case need to be mounted on the door itself or will it detect vibrations from break ins even if mounted on the frame? Do this unit have space internally to mount resistor? Do you have some install…

Require a ADE G3 Accenta Remote Control Pad that works in conjunction with a Jenko board. Would the current offering which you offer [ADE G3 - 4] that works with a Optima Board work with the Jenco board?

I have the following product I purchased last week - A073-00-01. It keeps throwing up RF Jam alerts. Is it possible that this can be faulty?

Dear. I try to install KP-250 PG2 to my Powermaster 30. But the cetral unit only say: "Wrong ID". What shall I do?

Dear Sir, I am looking for a wireless intrution alarm for a family house. I would like to have features such as, remote control frorm android or ios, GSM, camera display remotely. I live in Sweden and the alarm needs to support the EU standards so that it can be connected to a local security service if the alarm goes off. Would you recommend an Kit?

I am looking at purchasing a home alarm system for my house. My friends here in Sweden recommend the Visonic line. I am looking at a package to include the following: PowerMaster-33 G2 or PowerMaster-10 G2, could you please help me with what the pros and cons would be between these two? 1 x Internal GSM-modul GSM-350V21 2 x Wireless cameras (NEXT CAM PG2) 3 x Wireless magnets (MC-302 PG2) 2 x Wireless smoke detectors (SMD-426 PG2) Touch-panel + 3 tags either KPA-160 N PG2 or KP-250 PG2, could you please help me with what the pros and cons would be between these two? 1 x remote control Might also be interested in one or two outdoor cameras or motion detectors with lights

We have Optex FX-59 QZ alarm system which now it says to replace batteries however there are no batteries inside the sensors and in the panel. What are we supposed to do in this case? The alarm went off and an orange light keeps flashing.

Can you tell me what wireless portal is required for the galaxy dimension 520. Thank you.

Can you provide visonic power master magnets to compliment the visonic shock/vibration sensor making it a shock/contact sensor?

Can you get a larger ampage model? Is there any advantage in getting a larger ampage model, I am wanting to run 4 sets of Takex 100m Ext/200m Int Intelligent 4 Channel Quad Beams through it. Can you recommend what batteries I should use?

You sold the above to my installer when I renovated my property in 2012. I have never actually used it but now looking to start using it. The engineer at the time left me an engineers code which i cannot find nor can I remember the code I used. Is there anyway I can now get the alarm working? Your advice would be greatly appreciated or any contact at Scantronic. Many thanks ps a contacted another firm told me I would have to buy a new panel through him which I find hard to believe.

Hi, I am interested in the Visonic PowerMaster 33 but see that the panel itself only comes in a kit. I would like to add some items to the kit (additional chicklets, PIRs and a GSM-350) but also remove some items (door contact and per friendly PIRs). It is possible to modify the contents of the PowerMaster 33 kit so I do not have to purchase items I will not use ? Also is the SR-740 included in the kit the rectangular or hexagonal one ? Thanks,

Hi, Could you advise which is the correct cable to wire a honeywell flex to a keypad - the cable needs to run underground, is there a cable suitable for burial or do you sell an appropriate trunking? Many thanks Jogu

Can you confirm the version no of the Wintex software

just installed above pir in a conservatory and there are cats it activated 3 times with and without cats is there any settings I should set for a small conservatory?

Hi, I am experiencing odd behaviour with a Visonic Powermaster 10. Due to a planned extended power cut, the panel was unplugged for 24 hours, during which time the battery went flat. The panel was reconnected to the mains when the power returned and it eventually booted back up. Since then it has suffered 3 false alarms from separate PIRs. Should I do a factory reset to try to resolve the issues? If so, is the only option a hardware reset? When I open the back of the panel I can see three pins marked DEF and 3 marked RST. Which pins should I jumper please? Thanks in advance for any assistance. Mark.

Hi, I need to purchase 2 of the Risco Wisdom Wireless 4 Button Fobs. Please could you tell me f I will be able to programme them to my alarm without the need of a professional, do they come with programming instructions? The alarm system is Gardtec eurosec CPX. Many thanks,

I would like to purchase a Visonic Powerlink3 for my Powermaster10 system. Can you confirm I can use it to directly access my alarm panel remotely, rather than needing to use a Power Manage system please? I am hoping I will be able to access my panel by using the IP Address of the system.

I have purchased a Castle Euro Mini. The box only contained a control panel and the main alarm panel.. I would like to purchase 3 PIRs and 2 door sensors plus a battery and a bell box. There are so many on your website. Please advise the best for my system. Is it possible to also fit a call sender?

Hi... can you help me locate the correct type of wireless door contact switch for my home alarm system please? The system has a cooper security scantronic 9930 control. I have a wireless contact on top of a garage door which has failed.. I have changed the battery to no effect. I could send you pictures if it helps locate the correct type. Would you also be able to help with instructions for replacing the unit. I do have access to the installer mode code Many thanks