Intruder Alarms

I need to install a Eurosec LCD RKP keypad to replace the existing keypad which is working but worn out (keys don't work very well). If I just remove the old one and connect the existing wiring to the equivalent connectors on the new one will everything just work as normal or will the system need to be reprogrammed?

Dear sirs, I'm about to order a complete Texecom hardwired alarm system and I would like some help. Firstly I already own and I have prepared the cavity on my aluminum doors/windows for this magnetic contacts (https://www.securitywarehouse.co.uk/catalog/intruder-alarm-c-36/door-contacts-switches-c-36_44/knightbiased-flush-pencil-single-reed-6core-4k72k2-brown-p-4544.html) My question to you is (by your knowledge) is there any chance of interfering with the aluminum material? Aluminum is not ferromagnetic but is paramagnetic metal. I would appreciate any input on this concern

what would be the best P.I.R. for a warehouse that is full of hole, where the local Squires, Rats and a factory cat wonder free.

I have a twenty years old DA Systems Abacus 6P control panel. Each of the six zones is split with two PIR's on each zone. The existing PIR's are believed to be by Comet (but could be Stella or Apollo)and each has an integrated zone spliter so enabling three wire connection(12v+ 0v and tamper). Can you supply a replacement for the PIR's.

Risco Gardtec KITCP8LG2 I've a problem with one of the central units. It isn’t possible to set the number of times the bell is capable of sounding during a set period. If the system is triggered, the bell sounds always, even the third, fourth, … time when the number of bell re-arms is set to two. I’ve already disconnected all the connections and made a factory reset, but it isn’t making a solution. Please can you help me?

I have a optima G3 panel which is faulty and am looking to replace. In order to simplify replacement would the circuit board from the G4 fit in place of the existing board? (fixings in both panels look to be the same)

There is no telephone socket near by so want to link to WiFi network and get notifications via mobile app. What system is there available.

PowerMaster 30 0r 33 + 2-way communication I have a phone line and modem next to box House and garage 1 PM 30 or 33 (IP) 3 PIR (Camera) 1 Dummy + Flash 5 x PIR (2 x Garage, Kitchen, Dining room, Landing) 1 X Key pad 1 x Siren with flash unit (main building)

Hi, I’m thinking of installing a Pyronix wireless security system with live alarm boxes at the front and rear, including 4 pet friendly PIRs and 3 door contacts. I would like to operate the alarm from my phone. What price would the system be and could I come in to you office to discuss. Please advise.

I have an old (broken) Honeywell optima system and want to replace it with a new control panel, remote keypad, upgrade to the PIR sensors that are both microwave and I.R. and also have SMS alerts when there is an event, so I was looking at your website and saw you have a *lot* of things... just wanted to chat about what solution you could recommend. (I'm in the north west)

Hello, we have just had an outside office built - detached from the house by 1m. We currently have an Accenta G3 hard-wired panel with three spare zones. If I purchase Texecom GEC-0002 Ricichet Expansion pack and three Ricochet PIRs, will it allow me to attach the three wireless detectors to the spare zones? Your advice would be most welcome.

Hi, Im looking for additional replacement wireless sensors (contact and vibration) for a Risco WIsdom system, RWT62 (contact) and RWT6S (shock), you dont seem to have these in stock. Are there compatible replacements? I think they also be available under the Gardtec brand.

I am looking for a set off wireless beams to guard a driveway, they will be situated 50m away from my gate where the control box is with 240v and a fibre connection running to the house another 300m away I am using control4 and also have a texecom alarm system Elite 66w What’s your best solution,

Hi, we are looking for a ?security chain? to attach to an out-board boat engine. Should the chain be tampered with we would like an alarm to sound in the house, not at the boat, maybe 30 metres away. Do you have anything suitable? Thanks

I have a Menvier TS690 Security alarm that is now obsolete, Can I use the CQR contact SC513/WH/G3/B with this? The installation manual appears to say 'yes' but the existing contacts that I am replacing are not resistored.

Hello I have a Honeywell Galaxy Dimension Alarm system, with the plastic housing RF module and a mk7 keypad fitted. I am looking to upgrade to Galaxy Flex to make use of the App, and also the mk8 keypad. My current system has several faults I cannot clear, and unfortunately my Alarm installer has gone AWOL and he has changed the default engineer codes. Can you let me know if this would be the right kit to replace my current panel: Model: C005-S1-E1+CP051-01+A083-00-02 - £208.65 Ex VAT And do you sell the backup battery to suit this new panel

Good afternoon, I consider buying a Visonic Powermaster33 system. My premises are in Germany, and operating a UK system in Germany may cause some headache (or not). Is it possible to connect said system to non-UK alarm response services? I have been told that UK systems are locked to UK response services which would render the whole system useless for people in other countries. I already know that there are some restrictions concerning the interoperability of devices. Please shade light on the topic. Thanks in advance!

Hi, I have a Honeywell Flex 20 C005-E2-K04I with Mk8 Keyprox Keypad and Ethernet and I am looking for IR detectors. what do you recommend? I am not interested in wireless detectors, could you please also advise which smoke detector, door magnet and RF portal card is required? Doesn't have to be Honeywell.

Hi Can you please advise the best IR Beam for my outside gates, needs to have 10 meter distance ?

Hello I am having trouble finding a suitable hybrid wired/wireless alarm system. I have owned an alarm system in Australia, but I am having trouble finding a solution which re-creates the features that alarm had. The panel is for domestic purposes, and I would like it to have: * A wired door entry pin code pad * Be able to use a mixture of wired and wireless PIR/Glass break detectors/and shock detectors (Last one where possible) * The door contacts must be wireless, and as discrete as possible * Wired external bell box/strobe * The panel must be able to do part sets : eg, night mode > full perimeter armed,internal PIRs off, no delay on front door Home mode > Selecta…

can the master blaster siren be connected straight to230v supply via key switch without 12v relay supply,just need siren with 230v connection.

I have installed veritas r8 panel last year , I was wondering if it is possible to somehow have it so it contacts my mobile phone through my internet router when going into alarm mode, I know you can get a communicator , I have used these in the pass, but I do not have a land line anymore, like many people I use mobile phones, hard wired to my router would not be a problem , your help / advice would be appreciated ,

Hi, I was looking at something like the Scantronic 9651 to replace my faulty C&K Securitech 700L control unit. However I was wondering if there is something I could get that would replace my control unit and use my existing hard-wired PIRs, door contacts etc., but adds 'smart' functions like alerts to smartphone when the alarm goes off, remote unsetting to let a neighbor in etc.? Thanks in advance for your help.

What is the difference between Texecom Premier TD-W and GJD D-Tect X wireless? Are they both intended to perform the same job? Is there any drawback for Texecom product compared to the GJD one? How can i choose between these two?

I am after a vibration sensor to fit to my roller shutter garage door to detect attempted forcing of the door. Do you have any products that detect vibration to the door itself rather than the frame: concerned that a frame mounted sensor may not be sensitive enough. Standard wired honeywell Optima alarm panel.