Secware_Tech6

Peter If you look at the scantronic watch buttons or a pendant transmitter these would seem ideal. But not all transmitters will function on all receivers. If you need a watch tx then you will need a separate wireless receiver for this. http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=526

Im Sorry Chris our stocks were exhausted some time ago.

Be careful to checkk what the rfx rx supports. Unfortunatly andy the 701 isnt supported by the rfx. The only way to interface this is to use a standalone rx and connect that into a spare zone. Support

Actually the simple set has 2 modes of operation As specialist says where the outputs are wired into inputs to keyswitch arm etc, but they can also connect on the keypad line of the accenta / optima to allow full interraction without using inputs. Support

I can only speak from personal experience when it comes to recommeding panels, but the galaxy is an excellent unit. When you say you use texecom, im assuming you normally use the veritas as the premier is a very capable panel. The G2 range is not as powerful as the G3 or classic range. But yes the items you have chosen are compatible. The domonial RF system that the galaxy uses is very very stable.

I have to agree with specialist.

Sorry Avagi We dont currently import any Bluecherry cards. Support

Subash Im not sure i fully understand the question but if your saying you have had a breakin and your alarm is now not functional id advise you contact the installation / service company. If your upgrading to a bigger panel then as a abottom end panel i can recommend the honeywell accenta range, these have 8 zones and will take lcd keypads http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=864 Tech Support

Id have a word with your engineer to confirm the panel is dead, and they will advise you on the best course of action as they have access to more information than we do here. If you have alimited number of circuits id have a look at the 9851 range. But any panel change is not an easy task. Tech Support

The UK model we stock has the speech module installed.

The 490x is a stock item and is listed on the site. http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=1559

Im Sorry the TS 700 is along obsolete panel and we exhausted our stocks of starburst keypads some time ago. The TS series was replaced by the M series Tech Support

Dan The 207's include a basic copy of axis camera software limited to one camera. There is no way to make this do 3 other than to run the software on 3 different machines. Axis supply a basic 4 camera base pack that allows full recording and displaying of upto 4 cameras. This can be upgraded with 1 channel upgrade packs. http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=1197 Its a very good package. Alternatively you could take a look at the basic milestone package which is a cheaper option http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=1198

Yes the Came Fast P has a locking mechanism. Depending on the gate and security level you may wish to fit additional locks. Delivery times are approx 2 working days to any uk address. Cyprus will take approx 2 more days. Discount coupons are used for offers and credit notes. If you see an advertised offer it will usually have an associated discount coupon. Yech Support

Hi I assume You have done the above and you will also need to enable the keypad pa option Hope that sorts it for you Tech Support

Both those parts are now long out of manufacture. We estimate its 15-20 years old? Nothing currently manufcatured will match your mounting locations but it might be ebtter to send it to us for repair. Alternativly we could custom build a new module. All this depends on the system installed as it may be more cost effective to replace it. Tech Support

Phil If you select a dvr that has alarm inputs (eg DM Eco4) then you can connect a door contact to the dvr and fit this to the rear of the drawer. As you say wiring is impossible so if you use a Scantronic Door Contact Transmitter http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&cPath=36_60&products_id=693 and a Universal Reciever http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&cPath=36_60&products_id=529 You can the wire the reciver contacts into the dvr. On configuring the dvr if you select the alarm type, you can then record constantly and use the alarm log to find the drawer event, or set it to record only when the drawer is opened for a preset time. Tech Support

All of the modern RF equipment is 868 Mhz Tech Support

Martin Id take a look at the Risco Wisdom, homelink 75 or the Galaxy RF kit. The wisdom and the homelink have the benefit of being fully wireless. Bot panels also have 30/32 circuits. Delivery to Ireland will be calculated during checkout time but currently orders over

Chris Id advise against the domonial. Fantastic panel though it is, without any training on it you will not be able to program it. Id have a look at a G2 galaxy using the domonial peripherals. Its impossible to tell if rf will function on a site without first conducting a site survey but the honeywell Domonial RF is the best regarding range. The domonial will not group (ie allow you to run sub systems) but the g2 will. Have a look at the G2-20 or G2-44 control panels and an rf portal and the same peripherals, except the wireless keypad as this is domonial only.

Mark The eurosec cpx requires a wireless expander, then it will take the wisdom wireless peripherals. The keypads need an external coil on the gpx, the 595 etc have built in tage readers. The Homelink 55 is the same but includes a wireless expander in the kit. It also has 8 wired zones available. Wireless Expander for CPX and Compatible Gardtec Panels http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=1149 Tag Reader for CPX http://www.securitywarehouse.co.uk/catalog/index.php?main_page=advanced_search_result&search_in_description=1&keyword=i-reader Tech Support

Depends on how you define best? If it were about pure wireless ability id say the Honeywell using the domonial peripherals. If it were about peripheral options id say the wisdom If it were about flexability id say a texecom premier with an rf expander. Can you provide a little more detail and we might be able to offer a bit less generalised advice.

Chris Again a series circuit is used. Below is a wiring diagram for PIR's and Door contacts in series. But Its not advisable to wire more than one device per circuit as you cannot identify which circuit has activated. It also doesnt comply, as with electronic devices you must be able to identify which device has activated. Wiring 2 PIR's or all of the ground floor into one circuit will not give this indication. Modern panels above the budget units provide many more than 8 zones so this isnt usually a problem. Panels such as the Galaxy 2-20 allow for 12 zones on-board but accept an additional 8 zone expander (the 2-44 will expand to 44 circuits this way) to allow for this. Alternatively latching PIR's or shock sensors latch (keep the led active on the sensor until reset) to provide this indication. Galaxy 2-20 control panel http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=193 Latching Optex PIR http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=1273 Latching Shock Sensor http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=542

Chris Id advise you have a look at doing a training course, or better yet enrol at your local tech college and do an C&G 1852 alarm course. But in answer to your question As you can see the cables are marked Z1 - Z8 Its a series loop so a break in any one of the loops will cause the whole loop to open causing a tamper. Tech Support

Mark We dont supply any conventional wireless cams as such. We do supply wirelss ip cams. We also supply wireless link, but we dont supply the little wireless cameras currently because all that we have tested have performed poorly. Range and interference issues mainly. As all the systems use a analouge normal transmission they can also be recieved by anyone, and if anyone close gets an additional one it will affect yours. But ip cams use a digital signal that can also be encrypted to prevent snooping and I/f issues. If you want to record on an existing pc then you havea few choices, eg Geovision is using conventional or ip cams http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=781 Axis if using ip cameras http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=1197 Although they do provide a single channel free version with certain cameras. and milestone http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=1198 But i must advise caution with sharing a pc with dvr duties and normal pc duties. Also during a breakin pc's often taken. Standalone dvr choice would depend again on budget etc, and we would need some more info to advise you. Any of the softwares above allow some sort of remote access. Also some standalone dvr's offer this and all the high quality ones do. 'Night Vision' is a bit of a wrong description, most people call it that, but night vision is when you use an image intensifier (gives the green image you see on wildlife programs) and is very very expensive. Most cctv system that need to see at night require some form of lighting. This is either visible lighting or Infra red lighting. Depending on the system will decide the requied light type. Visible has many advantages but with the advent of budget cams including ir led's most now go for ir lighting. Using ir lighting you need either a mono camera or a true day/night camera, these range from http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&cPath=1_2_20&products_id=1483 to http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&cPath=1_2_14&products_id=14 and using a seperate ir system such as http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&cPath=1_7&products_id=40 Now obviously you cannot compare the performace of the 2 as the seperate system will far far out perform the budget system. There is also an inherant problem with combining ir lights and cameras in that bugs and spiders are attracted to the light. Normally when using a seperate emitter this isnt a problem but when combined you get some great images of a bright white moth. Hopefully that answers your questions mark