Secware_Tech6

This product is now withdrawn by castle.

that is the maximum voltage, as they are switches the voltage is irrelevant in your case

unsure re the screwfix question, but a honeywell gen4 optima is a honeywell gen4 optima etc. id use http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&cPath=36_62&products_id=1439 dialler http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=1425 additional PIR's http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=1007 Flush COntact http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=180

Id suggest there is a bad connection between the speaker and the main board. Please ensure that is connected correctly. If so id do a factory reset of the unit. If it still fails then we need to swap it.

wired k985 now in stock http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=2269

there is a warranty but id be sure its faulty before that. Could be an overloaded psu. Whats the day mode current on the system now you have added these items, and what was it before? Also what size battery is fitted?

when you say keyfob do you mean proximity or rf? if proximity then id recommend the accenta panel etc. If rf then id recommend the scantronic or honeywell G2 wireless hybrids

No they are not the same devices.

have a look here http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=667

As you note there is only 2 hard wired inputs. So you can only use those, ie 2 sensors.

CHeck the freq of your current sensors. Other than that they should be compatible

as above if you sure they are faulty we need to swap them. However texecom gear is generally reliable.

as above i assume you mean window foil. Still an excellent system as long as its not misused. very expensive to impliment and only suitable on certain glass types.

agreed. By dd243 6.4.5 you cannot use a user code to disarm during entry. you can however disable this feature if dd243 isnt relevant

a jamming signal may be a deliberate jam attempt but is more likly to be interference etc. it can be disabled but i would try and find the source of it. Look for any nearby wireless devices that may be affecting it.

you dont want to use an optima etc as a wireless system as its a wired system. if you want full wireless then as above either the ion or a visonic powermax.

ideally you will want to use a battery backed power supply but technically a regulated 12v plug in psu will work. no the units can be fed from different 12v psu's

you will need the installation code. If its on contract i wouldnt touch it. yes, sort of. you need a contour keypad. as long as it isnt locked yes. But if locked then no possibly depends on the answers to above. But if its under contract and you do this then the contract will be voided. Plus if its on response (ie police) then you need to be an approved installer to work on it.

you definely have a wiring fault, you may have damaged the main board. you can mix led and lcd keypads on the system

I would suggest you test the trigger first, ie switch the input to 0v to confirm the programming is right fot the input. The unit you have should do this. James

Yes both will work they will wire into the hardwired connections on the powermax main board

You could use a pir but the risk of it be obctructed is high imo id probably look at using door contacts and vibration if req. alternativly you could lace the door and wall area etc.

http://www.securitywarehouse.co.uk/catalog/index.php?main_page=advanced_search_result&search_in_description=1&keyword=EUR-031 have a look here

The Ion 40, visonic powermax and risco wisdom can do this. Have a look at the powermax here http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=1015

Did you resolve your issue. If you let me have your order number i will send you the install manual.