Intruder Alarms

Bought myself a Jablotron JA-83 panel. The manual advises to connect only 1 wired keypad (JA-81E). Additinional keypads should be connected wireless. Does anyone have an idea why ? Is this panel not able to work with 2 keypads on the same keypad connectors? Does the panel delivers not enough power to feed more than 1 keypad? Or does Jablotron likes to sell wireless keypads above wired ? I really would like to know why...

I saw a website similar to ebay recently. One local guy is selling GSM jammers for a tenner or so. He had 10K feedbacks by the time I found it. I guess 9999 of them was bought by thieves. Hence I understand GSM alarms are placebo for the owners... My question however - the wireless alarm sensors work on frequencies close to GSM 300-900MHz right? So it should be fairly simple to mask sensors with a jammer. As long as the jammed sensors cannot send alarm signal to the control panel - the whole system is pecked... is this the right picture? (I mean the more expensive alarms must have somewhat a poll interval alarm but I guess that should be around 2+ minutes - in…

I require a wired alarm system supporting a minimum of 8 detectors with the following key characteristics: Ability to set/unset using the lock on the final exit door, eg using a Chubb 3G114 Single Pole Shunt Lock or similar If the alarm is activated the ability to disable the strobe (in addition to the sounder) after a predetermined period of time, so there is no external indication of the alarm having been triggered Can anyone please recommend the a control panel / sounder combination which is able to support this configuration Many Thanks KB

I’m after 2 No. keypads compatible with the 4 wire Gardtec 600 or can you recommend a compatible alternative.

Hi Folks, Looking to replace a failing alarm system we currently have in place at a county scout hut. It consists of three PIR's, auto dialar and the central panel/main box. The alarm is activated by locking he door and de-activated my unlocking the door! (Clever stuff ) For ease of use we'd like to keep this system. For numerous reasons we wont be using a control panel to type in the code! Any suggestions? Just looking for a replacement system.. Something that we can use the existing lock with! (The door lock is simply wired straight to the alarm) Regards, Scott

hi... should be recieving my alarm from you trammorow and want to take a go at installing it my self.... but looking at the wires my sons layed 8 core instead of six :-\... and than for the internal speaker they did not feed the wire to the control panel instead the fed it to the keypad :-\. what can i do can i use the 8 core wire? and what about the internal speaker... and plus they layed the 8core for everything which is the bell box... PIR,s . Thanks guys by the way the alarm i purchased is ADE Honeywell Accenta Mini Gen4 with LCD Keypad hope that helps thanks!

Hi guys Let's see if someone can help me. I have a GD520, i have some zones set as 24h Function ( doors ), assined to diferent groups, those zones are already connected to existent RIO's EX: 3012. Now in some doors we installed DCM's, ( for entrace control propose only, not to lock doors ) card reader entry , REX to exit. Again EX: DCM301- DCM Reader 3011. On DCM i have only connected the reader and the REX button, the magnetic contact is connected to zone 3012 Problem: When acessing the door by pushing the panic bar, zone 3012 sets an allarm on group, this is working ok. Now, when i press the REX button or use the card reader, the zon…

Hi, One stupid question for the day, i have a LGSIX/01 and need to know how to connect it to a Intellisence AG6 sounder, as the connection dont marry up and i dont want to get it wrong, all help is appriciated Regards Brian Panel has Strobe + Strobe - SCB (T) SCB (A) Bell + Bell - Sounder has ST- (strobe trigget) TR- (tamper Return) S- (sounder trigger) V+ (PositiveSupply) V- (negative Supply)

Looking to purchase key fob for LG six Honeywell alarm system part number SS/F/UB

https://www.securitywarehouse.co.uk/catalog/intruder-alarm-equipment-c-36/vibration-detectors-c-36_56/aritech-gs610-shock-sensor-p-2831.html I have a wired home alarm system. Looking for replacements sensors that detect any force used to gain entry at windows (maybe referred to as shock sensors) Would this product be suitable?

So I am sorry in advance for the many questions, but I would rather ask that mess something up. I have decided to install my own wired alarm at home which is working out cheaper than the wireless options in the shops, I have opted for a Texecom Veritas Excel with LCD keypad, Texecom PIR's, Contacts, ext bell and also a Pyronix twin speaker/internal siren. First question - Should my brand new alarm panel smell (like electrical burny smell) ? Are they tested before being sent out. NO evidence of ever being fitted and no signs of board damage or heat exchange to components. It is brand new .... not refurbed or used. Secondly, I am putting the main control panel …

Looking to fit a low cost wire alarm into a small 2 bed house. Need 2x door contacts, 2 PIR and 1 sounder. Ideally I would prefer a seperate small keypad, as there is little room in the hall for the panel, and would like to add in 2 smoke detectors. Price is key, could anyone recommend a panel or kit.

Hi, the MCM-140 sold in your uk site, is compatible with 868.95mhz french PowerMax+ ? Thanks, Daniel.

Hello, Is it possible to purchase ceiling brackets for this PIR from Security Warehouse? The bracket required is the EB1 (Pyronix part FP01210). I can't seem to find anywhere to purchase these as a seperate item. Thanks John

Does this Smoke sensor (Menvier M12) come complete ie with the back plate? thank you

Anybody know if the SD2 dialer will work in North America. concerned about the ringer detection circuit as here in North America we use 90V at 20 Hz. Thanks

I am having difficulty making the low temperature output on my SD3 dialler work correctly. I would like the dialler to send me a text message when temperature drops below the alarm threshold. However, despite the "test outputs" suggesting all is functioning OK the unit does not seem to be triggering the alarm properly. I have it configured as follows: Output 3 is set to Temperature Low/ Negative Polarity Output 3 has single wire to Trigger C Triggers are set to (default) negative polarity Trigger C Alarm is routed to Contact 1 In Test Options switching on Output 3 gives correct "Trig C Alarm" in System Log In Test Options testing Trigger C correctly sends m…

Hi, Please can you give me some direction on wiring SD3 GSM Dialer to an Accenta G4 mini panel. I want to be notified when the bell goes off and to be able to reset alarm system remotely. Also do i need to install a relay? Thanks, Jeramy

I have a few questions about this product that I am hoping someone can answer. 1. The product has an in-built microphone. Is it also possible to attach an external microphone (like Texecom's voice dialler)? 2. Are the remote functions (e.g. memo playback, listen in etc) accessible through both the GSM route and the normal telephone line. 3. What's the best method for provide back-up power? Thanks.

Hi, we bought a menvier SD1+ speech dialler from your website last week. Upon testing it, our engineer found problems dialling out. Upon talking to menvier tech support he was told that it was from a batch that had been recalled and that we should send it back via our supplier. Our secretary e-mailed tecnical@securitywarehouse.co.uk this a.m., but no reply as yet. Pleae treat this as urgent as our client(unhappy!) has to have a member of staff on the premises until this is installed.

Hello I have a Menvier TS700 and am looking for a replacement keypad, would you be able to source a TSNETLED or TSNETSTAR keypad ? Thanks and Regards Karl

I have a customer who has a micromark z500 intruder system theyve never had the codes for it but want to use it. anyone got any ideas how i can reset the codes?

I need help please. Bought a A083-00-01 Ethernet module off ebay (yes silly idea) to install into a FX020 install I've just completed. Module has no status LEDs and the system does not see it. Before I order a new one from SW, can anyone tell me if I'm missing something? I would have thought the module would flash an LED even with no connection to the main board with power applied. I'm sure it is dead. Any advice much appreciated, thank you

This topic has been moved to Website Issues. [iurl]http://www.securitywarehouse.co.uk/forums/index.php?topic=456.0[/iurl]

Hi do you have a comms lead for the 9850 scantronic control panel 8 pin ? we have the 9800 12 pin version as shown on your site Many thanks