Intruder Alarms

On the verge of ordering the new Powermaster 10 kit from Visonic.Looks exceptional. Two questions if I may: 1) I understand that the line from the telephone master socket must connect to LINE. However is it crucial that the main telephone is connected to SET. I think this set-up allows the alarm to sieze the incoming call. Would it be possible to run the telephone off an extension socket or from the master socket itself. Also there is some info about RJ31X plug which gets over the problem- is this USA only? I also understand that the GPRS/GPS module gets over the problem 2)An IP camera is available in this system. Can this be accessed by the homeuser o…

hi have euro mini castle caretec is there any pirs that can go in a bathroom?

Good morning, I have just received a new 723r I purchased to replace an old one I'd had which was broken. Could you please advise how to connect it to my Homelink 75 unit, I've tried following the Homelink instructions but it doesn't seem to work. Thank you

About to connect my visonic powermax complete to the telephone. According to the picture in the manual its just to plug in. But theres just two small holes. The telecable dont have pins. What to do? I havnt seen such a cable before is it typical UK?

I was wondering if you could help me? I am looking at this gsm module as a means of contact me. I have no telephone landline at the premises I want to install this and I need something that will phone me like a mobile phone and not just send text messages as this would not work, due to hearing a text message at night. Also how many numbers can be stored/programmed into the module?

Hi I am new to wiring up alarm systems and have 2 SC550/WH door contacts to add into a Honeywell Accenta Mini Gen4 system. There are no instructions for wiring the 6 connectors on the contacts. I assume the middle two are for the tamper. Where do the power and relay connect?

I'm intrested in a low cost wireless alarm system that I can connect into a PC. I would be looking at about 5 PIR sensors and 2 door sensors to start. In an ideal world multiple codes or RFID tags could be used to set unset.

If i purchse another Texecom VERITAS EXCEL C/W LCD RKP will any of the new style Texecom Premier Flush Mounted Chrome LCD Keypads work with the excel unit and keypad.

I'm interested in a Visonic Powermaster 10 Kit with additional peripherals. However, there are a few questions I haven't found information about. - The system has partition support but still only can handle one partition according to the brochure. How come? - Is the central proximity tag compatible out of the box or do you need a remote keypad? - Is your kit supplied with Euro mains plug? - If not connected to a monitoring centre is the alarm info sent only by SMS to numbers by choice or is there also voice dialing involved?

I am after an alarm system for my barn. It needs 4 zones minimum and a gsm dialler. What can you recommend ?

We have a Scantronic 9752 system with 2 9955 rfx expanders. The zone in the garage has a dual tech pir and transmitted using a 735r. About every two days we get a Sup Fail message on this zone. Distance is about 45 yards - easy line of sight and only a thin slate roof for the signal to get through. Suspecting the transmitter was not strong enough we recently bought from you the 703r transmitter and unfortunately still have the same problem. We tried the zone on both 9955 receivers which both show a signal stength of 6. So we have effectively changed the transmitter and the receiver and appear to have a good signal but are still getting Sup fail messages. Any idea what …

full Texecom Veritas Excel alarm system After a busy couple of weeks I finally got to installing it this morning. I didn't wire the end station to my field devices just yet, I just linked one of the remote keypads to program my own user codes in. Following the manual, I powered with the battery first and the panel powered up for around 30 seconds but then switched back off (I had just disarmed the panel with the default code and was about to enter the programming menu). I tried powering up again but the panel didn't switch on. I then disconnected the keypad and tried it again with battery and then on mains, nothing happened. No LEDs or anything... The batt…

please confirm that the DBA-0001 Texecom Premier LCD Keypad is compatible with the Texecom Premier 168 Control Panel. Thanks.

I have been recalculating and it seems that the Galaxy G2 wireless starter is is a very good deal. The kit is about the price of the sensors and the keyprox. which means I would get the panel + RF portal for free. Am I missing something here? If I want a Dimension 48 wireles started kit it seems I would better buy the wireless G2 kit + a separate GD 48 panel. Also if you cam me me a better deal for a GD 48 + MK7keyprox + 3wireless PIR + 6 wireless door contacts + 4 prox's + 2way switch I would like to hear that too. PS. Can I dial/log in remotely (PSTN/Ethernet) with the dimension?

Please can you confirm wiring details for this system: the control is the Honeywell Galaxy Flex 20 and Honeywell IS215T PIR's are these compatible, how do i connect these as i have only wired alarms that have a separate tamper circuit connections do you have any wiring diagrams showing these PIR's wired singly to each zone ( 1 PIR per Zone)

I have a customer who is after adding a wireless keypad onto a Texacom Premier 24 (wired) system. I was under the impression that this was not possible without replacing the panel and all accessories (PIRs, Contacts etc) completely. Could you please advise me if there is a product whereby I can add a wireless keypad to this system

I would like to buy a menvier SD3. Is there a difference between the UK version and others. If I install the SD3 box in Belgium, will it work

Hello, I'm french and my english is very poor... I'm a retired man living in a house and so I'm not a company. My house has 15 contacts of relays (one on each door and on each window), they had been placed during the construction of the house. The wires are in the wall and completely hidden. I'm looking for wired alarm with an ability of extension ( number of wired captors or also wireless captors). The centrale must be quite (no siren) to be dissimulated from the burglars. In my bedroom I want and keypad with a LCD that can indicate to me where the intrusion occurs. My job was in informatic system, so I will be happy to configure my alarm wit…

hi i need to replace the red4bed key fobs? what the replacment? thanks mikey

i order from you 2 powermax plus they just arrived thank you i would like to ask you if you know 1. how can i set a PIR( zone 3) always bypass at the night? i want to press the button on the keyfob and set it bypass I can not find the instraction in the manual) 2. how can i setup the 4th key on the keyfob * ?? 3. witch pir with cable can i take from your store to use it with powermaxplus? 4. witch internal sirin with cable can i take

Is it possible to change the mk7 panel to a mk8 in this kit? What option do i have if i want alrms tomy gsmphone? http://www.securitywarehouse.co.uk/catalog/honeywell-galaxy-220-wireless-starter-kit-p-1632.html

I have a Menvier TS690id system and am after another keypad and ID chips. The panel will accept the ID plus chips. Do you stock a keypad that will work with this panel and do you still have id biscuits in stock. Also will your proximity tag readers be compatible with the netled/netlcd keypads already fitted as an upgrade and any new keypad you can supply for the system, if not fitted into the keypad.

hi. this dialler has been on site for a few months. originally we had a pay as you go sim card in and all worked ok. for ease for the customer we have replaced this with a contract sim card. i have checked the sim in a phone and all working fine however the dialleer will not see the sim card. i have spoken to jgd. who have advised mE. still the unit will not see the new sim

I have a speech-box with my powermax pro. No problem. But I just want to hear the internal speech-box speaker. Not the control-panel speaker that I don't want to hear. How to have only the speech-box sound ?

Hello, I just received the LCD panel, but it seems not possible to change the language as described above. Is gives me only some software version information (See attached picture), not buttons work to change the language. Is there a other way to change the language or a different sequence that I have to follow?