Secware2

What is the minimum signal of digi gprs to be considered good

Hi I have a storm axs strike master lock in a rooftop balcony door . It’s been automatically closing lately and I would like to know how I can configure it not to

rather than have to also install texecom speach dialler and texecom remote microphone units what we want is that there can be audio verification so listen in if alarm activated so listen into property

I have a Qvis camera model AMB-MB3 which is not working and as this camera is not in production any longer I am looking for a replacement - do you have anything available so that I could just simply change the camera without changing anything else - thanks in advance

I'm considering buying a small and simple CCTV setup with two cameras (one indoor and one outdoor). I was considering a Voltek H264 Full D1 Digital Video Recorder with 500GB HDD and 2 Genie WAHD2EB cameras (I want discreet white cameras). Are these items compatible? What else do I need to make this work? What kind of cables, etc.

Pyronix V2 GSM. I have 4 different voice messages on 4 different inputs. On activation of any input the first number is dialed, answered and accept code submitted.When the call is ended the dialer recalls three more times with the other three messages and the accept code has to be entered for all three.How do I stop the dialler making 4 calls for everyone alarm

Hi i should replace a smoke dectors for a DSC alarm. It's a FSA-410CS, what should i replace it with?

Hi I'm looking for a device to connect to a scientific freezer that will text/phone me if the freezer triggers its alarm. Ideally it should not require a landline. Can you advisse on which products I should consider please? Thanks

I have a Securit 800L+ alarm panel. Fitted by the housebuilder. I need to remove the alarm panel for building work. It would appear the siren is a Self Contained Bell or a Self Activating Bell. When I disconnect the mains and the internal 12v lead acid battery the siren goes off. Would keeping the siren -Ve and +Ve at 9v to 12v keep the siren from sounding.? I have the installation manual for the alarm but I do not have any details of the siren box fitted.

I have a 4 Zone Expansion Unit, GJD040 and a DygiZone enunciator and lots of Mini Opal PIRs. From one of your leaflets it shows 4 PIRS connected to each of 2 expansion Units. My GJD unit only seems to have provision for only 3 PIRs (A1,A2,A3). Is this correct or have I missed something? The two expansion units in the leaflet may have been Solitaire units. If 3 is the maximum can I double up? ie 2 PIRs in parallel? I realise the digizone will not be able to discriminate between the two but I guess it may work? If I was to purchase a second GJD040 can the two be connected together? How would the digizone handle Zones 5 and 6? Or would it be more sensible to have two separate 4 Zone systems? I currently have 4 zones, one for each side of the house and I now need to add two additional zones for a drive at the bottom of my garden and one for the rear of the garage. Could have combined these two additional zones into one of the existing but I would need to have 5 PIRs on one zone. Also you do not seem to have the Mini Opal GJD 332. Has it been replaced? If so what is the replacement? Can the Digizone be ordered as a separate item?

I am looking for a SIP dialer module that will work with a Honeywell Galaxy alarm system

Dialler with gsm backup if bt line fails.

We are a smart home company just starting to install security systems as part of our AV and music systems. We are looking for advise on how best to put a Texecom system together?

I ordered 6 ea. Optex 15m x 15m, Digital Quad Zone Logic(78 zones), Plug-in EOL. However the Plug in EOLs were not included. Do I need to order them as An extra? Could you please help me?

Hi - my Visonic Keypad is an MKP - 150 and I think it is dead. The Green lights are on but when I arm or disarm the system no noise comes from the Kepad itself and no Red light shows - nor an amber light for "trouble"I am sure it is powered by mains so do you think it is "dead?

Hi, Some advice please? Can you suggest which pet friendly PIRs are suitable for use with Scantronic 9448 panel which I am looking to purchase. Need a very compact PIR and noted the Texacom compact but is this only suitable for wireless systems as I noted from a search on the web that it uses a battery?

I have an A083-01 that was working fine in a Galaxy Flex 20 up until about a month ago when the panel started to report line failures. Despite several resets of both the Internet and the panel, the error would come back within an hour or so (line fail sensing). The diagnostics on the panel report that the comms are all good. The LEDs on the A083 also suggest everything is OK (Green on 0.1, off 0.9 sec) Orange intermittent = ethernet. If I disconnect the 435 cable I get an immediate error on the panel, so it is being detected OK.I’ve replaced the Ethernet cable, used a different IP address etc, all without change.However, I cannot communicate in or out via the unit. Rather than incur the (possibly unnecessary) expense of buying a replacement A083, I would like to first see if it is 100% at fault.I hope this is enough to go on, but I’m happy to answer more questions and to perform on-site diagnostics if you need.Very many thanks in advance.

Good morning, we are just finalising our new warehouse and need a beam system that can be put across the main shutter door that will play an audible alert if anyone enters the warehouse. Could you please advise what equipment we would require

Please find link below: https://www.securitywarehouse.co.uk/catalog/cctv-c-1/cameras-c-1_2/ahdtvi-cameras-c-1_2_163/vista-high-def-tviahd-box-camera-p-5765.html

We have 5 in stock currently ordering further on a 3 day lead time.

I am looking to replace some camera, currently using eneo vkc-1376 240v can you advise what you may have in stock in a current range or manufacturer. Need to be CS lens mount

Hello, I have a Blue Line Gen 2 (ISC-BPQ2-W12) Bosch PIR. Can you advise if this is suitable as a replacement for a detection systems DC950-A pir connected to an Ademco Microtech Galaxy 60 C052 alarm panel

can the texecom veritas panel have a remote keypad fitted to it?

Hi can you recommend a wireless battery powered transmitter to work with theOptex Battery Powered 4 Channel Synchro Twin 30m Active Beam.

I need to replace 2 brown sensors for white sensors. The sensors I have are GS612 and a GS620 I believe. My front door is as previously fitted a normal opening door. The rear door has been changed from a sliding door to french style opening doors. Both doors also have magnetic opening strips in addition to the shock sensor. Can you tell me what the differences are between the sensors? Do they use the same wiring? Should I be changing them like for like?