Secware2

I need to put 4 wired expanders and 5 keypads

How many keypads can I put on an I-on 50 if I am using 50 zones

Can you attach a keypad to this extender? https://www.securitywarehouse.co.uk/catalog/intruder-alarm-c-36/intruder-alarm-ancillaries-c-36_46/pyronix-enforcer-wireless-input-expander-p-3278.html

For our site we are going to need an expander for another building to be on the same system. Can a partition (area) have zones from the main panel and the expander?

You will need to log into your account and view the order with the software on, and the download option will be available to you.

I have a Menvier TS690 Security alarm that is now obsolete, Can I use the CQR contact SC513/WH/G3/B with this? The installation manual appears to say 'yes' but the existing contacts that I am replacing are not resistored.

Hi, will the UTC GS711 - Shock sensor with magnetic contact work with a Siemens SPC system? Or do you have any suggestion on a sensor for a SPC system that have both magnetic contact and shock sensor?

Could you please help me and tell me weather a dedicated phone line to the dual com communicator would be affected by a BMS system using the same line for data only

Just wondering if the Optex BX-80NR 24m External Wireless Ready Window / Curtain PIR will work straight off with the Pyronix ENFORCER RKP KIT 1

I need to replace a couple of PIRs and am looking at some which have eol resistors built in. They will be in a circuit wired in series - just the 2 - and there is already an eol resistor wired into the circuit at the panel. Can these PIRs be switched so that they show zero resistance as I am not sure what adding extra resistance into the circuit would be handled by the very old panel.

Hi I am stuck with looking at the diagrams to wire up ressistors for the alarm. I have bought flush door magnets with out resistors. Could you send me a picture or diagram how to wire up Double pole EOL resisstors for the Texecom Premier 48 panel? i bought the honewell EMPS-75 w magnetic contacts.

You can use the AX-100TF https://www.securitywarehouse.co.uk/catalog/cctv-c-1/detection-c-1_24/optex-4-channel-synchro-twin-30m-active-beam-nonc-relay-p-3367.html

Hello can you please confirm if you do a version the same as the 100 tf model instead of the tn models I have purchased please

Based on the information you provided. It appears that you have replaced the TF model with a TN model. The TN model does not have DQ ( environmental disqualification, this can be used as a pre alarm or a shunt for the alarm to prevent false alarms) so in theory you can install the beams without it. It is also worth noting that the TF range has options for NO and NC contacts that the TN only has the options for NC.

Hello there i recently purchased some optex -70 sensors from yourself for replacement of the obsolete optex 100 plus ones. On going to install them I found that the old ones have more wires eight as the new 70 ones only have six. So I was looking to see if there is a way to convert the old ones to the new

i have a client with a texecom 48 and wants some smoke detectors now some people say run alarm cable but i would of thought it be better to use the red fire rated cable?

I'm after a price for a adpro cctv system, one dvr and 6 external cameras. It is for remote monitoring

Hello could you please help me with how i would wire the The 12 Volt Relay Base, 45681-508 to aTexecom PREMIER ELITE 48 8 ZONE CONTROL PANEL please

I want to replace a PTZ with 2 IP cameras and send their video down a single coax? I am using NVT FLEX Switches that provide POE but I don't want to run an additional cable unless I have to? Sorry CLEER switches which are Ethernet over coax.

We have Ethernet modules on each panel and they sit on their own dedicated fibre network. If I use Galaxy Gold on the network, will this let me interrogate and monitor all panels? Are the panels interfaced to the galaxy gold by means of MAC address?

We have 5 separate buildings with their own panel, rios' and devices. I want building no1 to be the master and the other 4 buildings to be slaves. I want to set/ unset the 5 buildings from an RKP in building 1. The network is fibre between buildings. Will Galaxy gold enable the programming to this structure?

Honeywell have also advised: It's not possible to link galaxy systems together as master and slaves. Only way would be via outputs and keyswitch zones, so as to set different panels from a main one by triggering outputs.

Can i network 5 different systems together with this panel? 16:00 Im thinking, have 1 as a master and the others a slaves Honeywell Galaxy Dimension 520 Control Panel Only C520-D-E1

I am replacing an old system which is armed on exit using a shunt lock, I require a similar wired system. As we have a number of keyholders we prefer the final lock to arm / disarm the system in preference to a keycode

This will momentarily make or break when beam broken , do you have a timer device that would allow a moments trigger , to allow an alarm to sound for a period ( eg 2 mins or whatever )