accounts3

Can you confirm which control panel you have

You can fix any bell box, if it is hardwired, you would need a Risco bell if you wanted to go Wireless

can you explain what you mean by an outside alarm box??

you will need to connect the cables from the roller shutter contact to the cable you have run for your garage contact, this is usually done in a junction box

Honeywell manufacture a dialler, but I do not think it would allow arm/disarm remotely

would need more details please, is the AC power light off? What problems are you experiencing

yes it will work with the accenta/optima, and connect to telephone line, but not control down the phone line

This topic has been moved to General Discussion. [iurl]http://www.securitywarehouse.co.uk/forums/index.php?topic=990.0[/iurl]

This topic has been moved to General Discussion. [iurl]http://www.securitywarehouse.co.uk/forums/index.php?topic=915.0[/iurl]

This topic has been moved to General Discussion. [iurl]http://www.securitywarehouse.co.uk/forums/index.php?topic=1824.0[/iurl]

All manufacturers beams would be compatible, it depands on the range you require as to which beam you choose

These motion sensors are not beams, so do not come as pairs, as to needing one or two, this would depend on the area to be covered.

The TD motion sensor would be compatible with any control panel, so yes also with the R8. It can be wired in ID, double pole or end of line, and if the zone is programmed for chime, then this facility would work Regards Sec ware Team

Regretfully we do not have any one who is really knowledgeable on this unit, hopefully one of our forum members will be able to give some direction, or try ACT direct on 0845 300 5204. Hope your problem can be rectified Regards

we are not aware of the 500R giving a 'reading', we suspect that the LED showing a fault could be a jamming fault, if you have any further information then we could maybe be of more help. Regards

regretfully we only currently stock the items you can see on our web site

This doesn't come with a switch, but an electrician could wire in a light switch to be used when the unit was required to sound

You will either wire it EOL or double pole

Sorry you are having problems, please raise a ticket for your return, so we can issue an RMA can get the problem solved.

1. The MHz of the items are shown on the web site 2. Prices do not include VAT, this is added at the end and is 20% 3. The items we stock are shown with prices on the web site + vat Hope this helps

can you confirm the manufacturer please

Regretfully it is not one I have herad of, perhaps a forum member may have some comments to make later

You will need a Dual Tech, but it would be your choice of manuafacturer

yes it is

we sell cable in 100 metres only, the video entry is a very cost effective unit no IR's and standard lens only