Secware

I am a building contractor with a number of sites in operation. I am interested in the GJD GSM Autodialler or Pyronix V2 GSM. Can these products be used as standalone alarm units. Can PIRs be connected directly to this unit or do I have to integrate this with an alarm control panel?

I have now added the mk8 keypad and keyprox, please follow below: http://www.securitywarehouse.co.uk/catalog/microtech-galaxy-mk8-keyprox-lcd-keypad-p-2552.html http://www.securitywarehouse.co.uk/catalog/microtech-galaxy-mk8-lcd-keypad-p-2553.html

Hello again! Yes I would only require the mk8 keypad, not a Galaxy Flex panel as I will be using a GD96 panel (need 2 rs485 bus)

These are available as panel and keypads: http://www.securitywarehouse.co.uk/catalog/honeywell-galaxy-flex-flex-20-uk-panel-mk8-keypad-p-2493.html Is it just the keypad you require?

When will you be able to sell the new MK 8 keypad for Honeywells Galaxy-range?

I am interested in your product 21/40, Secware Anti Vandal Low Light Fixed VF Dome Camera. However, there is little detail on the website, and Cat 5 is mentioned. Can you please tell me whether this is a standard analogue output camera, or network output with configuration via Ethernet? Thank you,

I can't find any Wired Siren for my Powermax Complete alarm. Do you have one, or could you recommend one?

is it possibe to part set a system, silently, using a Honeywell easy set with key fob. If not , how is this acheived. I want to set/ unset the ground floor from the first floor, in the quickest and quietest way.

We have been asked to quote for installing the following system at 2 x sites. ( one with 4 x flats & 1 with 3 x flats). Installation of access control systems to all flats and main entrances. Paxton Switch 2 controller unit in vandal proof housing 1no. controller unit to be installed in a secure/secluded location at each of the sites. Power supply unit ? 12v DC power unit in steel case PROXIMITY vandal proof reader 1no. reader to be securely located at each flat entrance and the main entrance door at each site. Site 1? 4no. flats + 1no. main entrance: Total 5no. Site 2 ? 3no. flats + 1no. main entrance: Total 4no. Electric latch ? 12v Fail open release kit 1no. latch to be securely located at each flat entrance and the main entrance door, at each site. Spec of unit to be suitable for intended use and appropriate for level of traffic.9 in total. Electric latch ? 12v Fail open release kit - x 9 Cable ? 10 core reader cable PROXIMITY encoding system ? on site and remote - 3 x Encoding system to be supplied in order that Key fobs may be re-programmed both on site and remotely from an off-site office location. The system is to be installed at each site so that each keyfob allows access through the main entrance door and into 1no. flat only. Each key fob to be re-programmable to prevent unauthorised entry following end of tenancy. PROXIMITY key fobs ? pack of 100 100 key fobs to be provided to cover both sites and all 7 flats - 4no. colours, 25no. of each colour

I have a playcentre which has the Videx ART836M external unit and two internal phones. The ambient noise within the playcentre is loud therefore the external call cannot be heard and we are losing business, as people cannot gain access to the centre. I would like to add two internal sounders (one beside each handset to boost the call signal when the external button is pressed, in addition when we pick up the internal phones the reception to external is poor. Please advise as soon as possible.

I bought a new DT7550UK2 from you last week to replace an existing faulty one. The existing one is a DT7550UK so assume this must be the older version. Looking at the existing wiring, it is wired as follows F1 - empty F2 - empty T1 - resistor to C T2 - yellow C - resistor back to T1 and to NC EOL - empty NC - resistor to C and blue V- - black V+ - Red Both resistors have the following bands (Brown, Black, Black, Brown, Brown) or I guess could be (Brown, Brown, Black, Black, Brown)? Looking at the installation instructions for the new one, it implies I should not use the existing resistors and wire up as above. Is this the case? Also, will the factory jumper settings we ok?

Hi , about to place order and wondering main difference between accenta mini panel gen4 and standard poly gen 4 (other than size)

I am looking for a home alarm system for both security and fire / carbon monoxide There are three bedrooms on the top floor, downstairs there is a hallway leading to the front door, a combined lounge / dining room 25m2 with windows at either end, kitchen with door to outside and a bathroom with a large window. The lounge will need to have a carbon monoxide detector fitted as it will contain a log burner. I would like to be able to mount the control unit away from the key pad and may in the future wish to add another keypad to go in the kitchen. I am very happy to have a wired system and install it myself as the whole house is being renovated at the moment but would welcome your advice on the most cost effective system I can buy from you including internal and external sounders, sensors, detectors etc.

Hi there. Can you tell me if the Videx 1 Button 4000S Surface GSM Intercom Kit allows users to manually enter a code on the keypad to gain access? Also, do you know if this system will work with FAAC gate openers?

Hey there, i've got a ESP Digi-view4 CCTV system and I need to make a recording for the police, but i am currently struggling to connect it to my laptop. If you could provide me with the software i require, that would be amazing! thank you in advance.

I need to fit 5 hard wired fire alarms in my house as part of a loft conversion. I bought a Scantronic 9751 based burglar alarm system from you a few years ago. Do you supply fire alarms that can be hard wired into this system?

last year bought Honeywell ADE LCD Accenta from you website want to add: Honeywell Hard Wired Carbon Monoxide Alarm Honeywell Combination Optical/Thermal Smoke Detector (58°C~) Honeywell Combination Rate-of-Rise/Thermal (58°C)Smoke Detector. are the above compatible and do I need bases for the fire detectors and can I add a 12Volt 7Ah battery instead of the 2.3Ah exernally (outside of the panel)

Some of the Galaxy Flex has been added, please follow links: http://www.securitywarehouse.co.uk/catalog/honeywell-galaxy-flex-flex-20-uk-panel-mk7-keyprox-p-2492.html http://www.securitywarehouse.co.uk/catalog/honeywell-galaxy-flex-flex-20-uk-panel-mk8-keypad-p-2493.html http://www.securitywarehouse.co.uk/catalog/honeywell-galaxy-flex-flex-20-uk-panel-mk8-keyprox-p-2494.html http://www.securitywarehouse.co.uk/catalog/honeywell-galaxy-flex-fx050-control-panel-p-2488.html http://www.securitywarehouse.co.uk/catalog/honeywell-galaxy-flex-fx100-control-panel-p-2489.html http://www.securitywarehouse.co.uk/catalog/honeywell-galaxy-flex-fx20-uk-panel-mk7-keypad-p-2491.html Kind Regards

I want to buy the new Honeywell Galaxy Flex - are you able to supply it in a package like you have done for the "Honeywell Galaxy Dimension

Yes this will take a 7.0amp battery. Please follow link: http://www.securitywarehouse.co.uk/catalog/enersys-12v-70-ah-battery-p-1340.html

About to place an order but wsh to enquire if the maximum battery size for ADE Honeywell Accenta Poly Gen 4 with LCD keypad is it the 2.3 amp Enersys battery or will it take the 3.4 or 7.0 amp battery.

Hi, i was looking for make a security system with ipcams and zoneallarm as software! But i have a question: if i use ipcameras i must have also a captured cam or i dont need it? I was looking to buy this camera Axis 207 IP Network Camera! And add all that to my mythbuntu system! Thanks for your help

We do sell cable in 100m rolls, please follow link: http://www.securitywarehouse.co.uk/catalog/secware-6-core-intruder-alarm-cable-p-1337.html Due to the weight regarding health and safety the maximum per order are 5 reels. Orders within mainland UK over £180.00 are free, under are £3.99.

Once an order has been processed we aim to deliver between one and three working days. Sadly we can only process electronic payments. In the past for accounts purposes we have been able to send a pro-forma invoice across, once the order has been received to make a payment via BACS we can send a pro-forma out, we will then await payment for order to be dispatched. Kind Regards Support

Hi there, I would like to order 2 packs of the Paxton LF/820-025G door access fobs. Could you please let me know what your current leadtime is. Also, we are part of Solihull Metropolitan Borough Council. Is it possible to fax you an order or email our instructions through and be billed by invoice? I look forward to hearing from you soon, Many thanks