Jump to content
Security Warehouse Support Forum

Secware_Tech6

Administrators
 View Profile  See their activity

  • Posts

    258

  • Joined

  • Last visited

  • Days Won

    14

 Content Type 

Everything posted by Secware_Tech6

  1. Secware_Tech6
    Have you got the right frequency?
  2. Secware_Tech6
    Good thanks for the follow up
  3. Secware_Tech6
    I'd check the aux fuse in the panel first
  4. Secware_Tech6
    Yes as above looks like a bus or device issue. Assuming you have checked and tested the cabling then just remove one device at a time. You could also split the busses as iirc the 96 has 2 busses
  5. Secware_Tech6
    No it can't. Either run a cable to it or get a flashing led kit I.e. https://www.securitywarehouse.co.uk/catalog/bentley-double-flash-unit-with-two-leds-p-3742.html
  6. Secware_Tech6
    Yes you could use those in that way. I assume you intend to add this to a wired system?
  7. Secware_Tech6
    Yes but you will need something to power the dialler.
  8. Secware_Tech6
    I would never recommmend wireless for CCTV. WiFi ip camera's may be an option though. Bit I still wouldn't recommend it. What's the environment?
  9. Secware_Tech6
    Yes you could replace the panel but you will also need to replace the keypad. They come as a kit anyway
  10. Secware_Tech6
    It's no longer available. Replace it with either a Honeywell accenta LCD or a euro mini
  11. Secware_Tech6
    That's not one of out products?
  12. Secware_Tech6
    Yes sounds faulty just raise a ticket requesting a swap
  13. Secware_Tech6
    It will take upto a 7A/h and yes with the sensor they are just a little slower
  14. Secware_Tech6
    Honeywell accent etc has a set out out, bit is also active in walk test
  15. Secware_Tech6
    Perhaps you do have a faulty goes unit?
  16. Secware_Tech6
    You could use a speech dialler with dial in facility assuming your amp has the correct inputs
  17. Secware_Tech6
    Yes they should be ok. You definitely won't be able to reuse the domonial keypad
  18. Secware_Tech6
    Is the sim still active?
  19. Secware_Tech6
    Depending on the age I believe so. Can you upload a pic of your pirs
  20. Secware_Tech6
    First of all get your pc working on the same local lan, then look at setting up external access
  21. Secware_Tech6
    It's the left of the two together
  22. Secware_Tech6
    You access the cloud via the website. There isn't any software as such.
  23. Secware_Tech6
    Yes it is
  24. Secware_Tech6
    You will need to rewire it at the panel end possibly but 6 core is fine, what control panel you connecting to?
  25. Secware_Tech6
    I'm afraid no, it's not a panel designed for diy install. It's a professional product.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept