Intruder Alarms

https://www.securitywarehouse.co.uk/catalog/intruder-alarm-equipment-c-36/intruder-alarm-ancillaries-c-36_46/secware-ps7-adegen4-prox-tag-pack-5-p-5862.html Hello , I have the ade simple set unit, with the older fobs, which I can see are obsolete now. Your alternative link takes me to these items. Can I check that they work directly, or do I need to change the simple set proximity unit ?

Hi. Do you know if there is a known bug in Galaxy G2 20 alarm such that after an AC Fail it can only be reset by Engineer. Mine offers Manager Rest Required but this does not work and I have to use the Engineer login. Checked the forum but could not find any relevant info. Thanks in advance.

What battery do I need in the flash guard sounder 42-306823. thank you

Hi, is there a way to gather more logs for zones that it is currently available? I have 4 zones and there is 250 logs for each zone.

Hi. I have the CP7 which doesn’t have the LCD display. Can I replace this with the newer CP8 keypad whilst retaining the old CP7 main unit? Thanks in advance

Veritas Excel CFE-0001 has a telephone connection ? I would like to be notified by telephone when the alarm is triggered

How do the old buttons come out of the veritas 8 panel so I can put the new set in. I was hoping it would part from the front so I could just change number membrane, but not sure, thanks

hi i have just purchased a new house, it has this alarm system fitted ADE LOGIC SIX it is live and the passives appear to be working however i am unable to find a key pad, or key fob, to set the alarm , do you supply spare key fobs ? and are they easy to pair with the alarm fitted in my house ? any information would be a great help

I have an i-on16 Security Alarm an require 3 Door sensors could you advise which sensor I will need to buy?

I have recently installed several of your Pet immune pirs, however the alarm keeps on triggering when my two cats are in the house and the alarm is set. My question is, are they only pet immune to a certain height so if the cats jump up on a chair they will trigger it?

The requirement to use this sensor is for a sports hall in a school. Can it be installed inside a cage and do you supply a cage for it? Thanks

Hello, I have a wired fire and intruder alarm system, with the main hub in my house. The sensors are in a recording studio at the end of my garden. The fire/smoke sensor, above my recording desk is inaccessible and has failed. As the wires are inaccessible, I want to replace it with a wireless option. What do you suggest?

Would this battery below be a suitable replacement for a Texecom 12V 2.4AH BATTERY for an accent 8 mini alarm system? Secware 12v 2.3a/h Battery [MKES3-12SA] - £8.09 : | Best Price Promise | Security Warehouse Professional products

Can you kindly confirm that the Bosch Blue Line Gen2 Passive-infrared Detector, that you sell, would be fully compatible with my 9651PD-41 Grade 2 8 zone Panel that I purchases from you a few years ago?

Hi Im looking to connect a module to an intruder alarm to send a signal to a panel when the alarm goes off. Is this possible with something like the Flex trigger module?

, I have an older alarm panel that does not need EOL resistors. Is there a way to use this device without the EOL resistors selected as a normally closed circuit like traditional alarm circuits? Before I had the texecom AED 0001 which is fine but this new replacement talks about EOL resistors built in in the literature. I just want to know if it is compatible with the texecom veritas panel which doesn't use EOL

Hi how do you change the code on these alarms if you don't remember the present code?

Hi, I'm an installer looking for a 6 zone wired panel with option to expand using app, What do you suggest?

Looking at Eaton 703R with Receiver and way to alert when received

Hi, Just purchased the ACT1313 PLUS Spike suppressor. Could you advise if just the RED/BLACK/EARTH wires only need to be connected or do you also need to connect extra wires from the terminal blocks to an offending circuit. Basically not sure what the terminal block is for? As you have probably gathered I am DIYer not an alarm specialist. Any advise would be grateful

https://www.securitywarehouse.co.uk/catalog/intruder-alarm-equipment-c-36/remote-signalling-c-36_57/eaton-scantronic-adapter-board-p-6480.html ------------------------------------------------------ I have an older i-ON40 Scantronics alarm (Cooper Security Limited) which I would like to reconfigure to enable remote access. However I haven't found any online information that can confirm if this older model is compatible with the remote App. It is currently running firmware version 4.04.17. Is the current firmware compatible with any remote Apps that are available? If not is it possible to upgrade the firmware? Which WIFI module would be required? COM-DATA-WIFI or COM-DATA-4…

Tate T-B600 external sounder does not seem to be available anymore. Please advise on suitable replacement external sounder box for wired system to Tate "Javelin" 8 zone panel

Product Name: HKC Miniature wireless magnetic contact with shock - Brown https://www.securitywarehouse.co.uk/catalog/intruder-alarm-equipment-c-36/wireless-ia-c-36_60/hkc-miniature-wireless-magnetic-contact-with-shock-brown-p-5971.html ------------------------------------------------------ Can I change battery on this unit myself. Rf mcsb . I do all my own DIY. I only want to know how to change the battery on theses contacts as engineer is always busy . I understand that any more serious issues with alarm needs an engineer to fix . Can you help.

Hi, I am looking for a detector to cover an extension with lots of glass in. A dual tech sensor with k band has been recommended. Is this detector a good choice please?

Hi I have installed a Visonic Powermaster 30 and an LCD keypad KP250 I read in some KP-250 documents a reference to "Input Voltage (V DC) - 12" under "Power Description" section. The electronics board in fact shows "DC IN" next to a 2 pin JST H2 connector. I was wondering if: the lcd keypad can in fact be powered up from an external power source? if affirmative, what is the connector pinout (positive and negative pins)? and voltage to apply is the stated 12v? thanks in advance r.