Jump to content
Security Warehouse Support Forum

securitywarehouse

Members
  • Posts

    87
  • Joined

  • Last visited

Everything posted by securitywarehouse

  1. "Andy, thanks. I noticed last night that the alternating led's were working, but seemed to be very faint, but that could have been because it wasn't very dark. I deliberately activated the alarm last night and the external sounder tried to go but then continued in a very muted form. The internal sounder on the control panel works ok as does the dialler. Is there any way of confirming whether it's the external sounder or control panel that's faulty?"
  2. I am interested to the product Scantronic I-ON16 and Scantronic I-ON40 I wanted to know if it is possible selection the Italian language in the men
  3. "Andy Thanks for your response. I've been away for a couple of days hence the delay in replying. It is the bright strobe that flashes, the one that flashes about 6 times when the alarm is set. Come to think of it, I've not seen the alternating strobes flash recently. It's difficult to explain about the sounder, but it's as if it's trying but just can't get going."
  4. I'm looking to buy some visonic k980 wired pir's can't seem to find them on your site. Do you sell them? and at what price?
  5. i have recieved the Sterling LCD keypad today it looks like i have been sent the latest LCD pad and my pad is approx 7yrs old. Is it compatible?
  6. Hi as it is wireless alarm I would only place the shock detector in the van when I had van at home overnight fitting as required and leaving shock detector at home until required again
  7. i have respond/eclipse wireless system fitted in the house occasionally i have my van in the driveway would this "Risco Wisdom Wireless Shock Detector" be suitable to fit in the van? or can you recomend one that woud work with my alarm
  8. I would like a wireless single PIR, single door, telephone dialing warning unit with small key pad for a 2rd floor two bed flat. Ideally I'd like an internal and external audible siren but would settle for either. Scantronic have been recommended. Any ideas on what to buy rom you please?
  9. In your opinion,which pet PIR tends to work the best and is more reliable for a wired system.I have looked at Bosch,Honeywell,Visonic and Texecon but info is not conclusive.Thanks
  10. I am looking to alarm my workshop. It consists of 3 rooms currently with plans to add another room in the future. There are 2 up and over doors, 1 standard access door and 1 double split opening door. 2 of these doors will be entry points with a keypad located close by. Only one of the rooms has a window. There is a cat flap in one of the doors for pet access. I have been looking on your website and come up with the following list of products for the system based around a Honeywell Accenta G4 Mini panel. I chose this panel because of price and expandability. Can you tell me if all the items on the list below are compatible ? Is there anything missing from the list that I need to include ? Would you recommend against this system with a different one in mind ? Any advice gratefully received. 1 x ADE Honeywell Accenta Mini Gen4 with LCD Keypad 1 x Honeywell ADE LED Keypad for Optima G3/Gen4 or Accenta G3/Gen4 1 x Secware 12v 2.2A/h Value Alarm Battery 1 x Honeywell ActiveGuard AG6 External Siren Blue. Inc White Cover 1 x SECWARE 16 Ohm Internal Speaker 3 x Honeywell Activ8 PIR - Single Channel 18m Quad Element Pet PIR 1 x SECWARE A40 5 Terminal Flush Contact 4 x SECWARE D20 Surface Contact 1 x Secware 6 core Intruder Alarm Cable
  11. Please let me know if Emergency Button MCT-220, is available with sounders
  12. I have the above as part of my alarm system. The external sounder does not seem to be operating although it seems to try. The strobe lights still flash when the system is set. I assume this is something to do with the piezo in the unit rather than a fuse. The unit is about 5 years old. If I buy the back plate will that come with everything I need to replace the sounder and is it likely that the fixings will line up or has the design been changed?
  13. You are currently selling Bosch eazyo cameras are they the same as the Phillips Reo cameras (they look identical). My original system is phillips reo with the vcr replaced by a bosch eazyo dvr. Both systems were made in portugal and look identical, so i am assuming that they are the same.
  14. Hi, I\\\'m after a reliable wireless system, 5 zones down stairs one of which is a gargae, 1 zone upstairs but a pir would not be suitable in this area. The sounds to be wireless operated but mains powered. I\\\'d prefer a keypad activation & deactivation. Also is there a posibility it can notfiy you via text if your alarm is going off.
  15. Does this come with a battery ?? If not, which one do I need to order for it. Which Remote keypad do I need to order for it.
  16. Just purchased a host of intruder alarm equipment from you - it arrived yesterday. The control panel is the Texecom Premier 48. Does this panel have an intergrated sounder that will sound when the alarm is activated (entry/exit and on activation) or do I have to buy something additional?
  17. We wish to order:- One RFX08 expander. Six 723rEUR-00 key-fobs. Weight is showing as 32Kg with a carriage charge of
  18. I am looking for a wireless alarm with 4 sensors, 2 door contacts, 2 keyfobs and an autodialer, can you let me know the cheapest one you do please.
  19. Does this unit have a double pole switch over or if not what is the price of the same unit with double pole switch over.
  20. I have been asked to buy two of the above but not sure of the difference between the two that are shown!! Can you explain if there is any difference please? These are to be shipped to Tanzania, if this is of any help.
  21. At the price advertised do you get 1.5TB and what is the warranty on this unit.
  22. Can you suggest some compatible, either a wired or wireless Panic Attack alarm for the purchased Secware Optima
  23. I have installed, approx 9 years ago, a scantronic 500r.+ system and have had the remote control stolen during a break in. My fear is they will return. Is it possible replace the control box with a new one in order to make the remote U/S, Or is it possible to disable the remote. I have 4 PIRs one door sensor and a remote key pad. Sorry I have marked this high but having just lost a new car do not wish then to re-visit disble the alarm and clear the rest of the house. Thank you for your time.
  24. can you advise please? we have had security gates fitted 200mtrs from the farm house, 4 core amoured cable plus a bt wire for the phone, the quote for the work done was for integral phones, plus an external bell to enable us to hear people at the entrance!when we are about the farm,so far the fitters have been unable to get a bell to work due to the fact they tell me its 12 volts from the bt line and the distance away won\\\'t power a bell?? can you help me please.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.