Secware

If using eol then you will need to link out with a resistor as suggested or disable the zone in programming. ZOne splitting allows 2 devices per circuit with identification of the device in alarm. YOu should see wiring diagrams for std door contacts (the secware contact you have) as well as contacts with built in eol resistors. re your soundbomb, you would normally wire that in parallel with your external sounder, ie HO+ and bell -

Good morning, The measurements for the speaker are H) 4" W) 4" D) 2" Hope this is of help Regards Elaine

Hi So sorry we did not get back to you in time, but if you need any further help, please ask Regards Elaine

Hi Ravis, We are going to do that so it will help others with Paypal so they are aware that they must have a verified and confirmed Paypal account before they order with us, we do send them an email about their account be it can cause delays for them if not set up first. Thanks for your ideas keep them coming, if it makes it easier and improves our service to you guys thats great. Regards Elaine

Hi Dan, All of these will work with the Logic 6 panel, but for your garage I would suggest you use a Dual Tech, maybe the Honeywell DT7550, hope this is of help to you Regards Elaine

Hi looking to fit logic 6 to my house and i need 5 pir i was looking at the bosch ones one of those is for my garage and 1 door contact. will this all work together or would recomend a diffrent control unit? hope to hear from you soon i would like to order today thaks Dan

Hi Ray, You cant put a KX15DTAM on the Optima panel, the replacement for the Equinox E is a KX15DT not the anti masking one. Hope this helps Regards Elaine

Hi, how to wire the kx15dtam sensor to the Optima alarm panel.I simply want to replace the now obsolete Equinox E sensor. Thanks

Hi Martin Yes, the GJD Digizone Lighting Controller can be used with 'other' PIRS. Hope the above information helps Regards Elaine

Hi, Can I use the Optex PIRs with the GJD Digizone lighting controller? I want to use Outdoor PIRs that are not triggered by small animals. Thanks, Martin

Hi John, Everything that you need comes with the Homelink 55, it is full remote UDL, remote servicing and system diagnostics via PC based Windows downloader programme, hope this answers your query Regards Elaine

Hi I am interested in purchasing the Scantronic Homelink 55 system for use at my private residence - this will allow me to upgrade my existing system and utilise the alarm cabling with the added ability to install future wireless devices without the need to install any further cables. My query is this - when installing the alarm can all of the programming functionality be achieved by the use of the keypad included in the pack - or does any specialist device or software need to be purchased? Many thanks John

Hi, Yes the M12 does come with a base. It is also adjustable to do smoke, optical and fixed heat and rate of rise, Elaine

Does this Smoke sensor (Menvier M12) come complete ie with the back plate? thank you

Good morning, The ADE 8EP416 will work with your Accenta 8 panel, but the 8EP417 LCD will only work with the Gen 4 range, hope this is of help to you Regards Elaine

Hi, So sorry I could not get through to you last night, but I have now sorted out your query with Paypal for you, I was sorry to hear about the difficulty you had when speaking to Paypal, this is why it is always best to have your account verified and confirmed before placing your order with us. If you have any futher queries please feel free to use the ticket system, we are glad to be of help. Regards Elaine

Hello again, All the external sounders come with battery back but you will need to run a 6 core cable for it, and as you said you will need to order a cover for the live back plate Thanks Elaine

Good morning You can use any make of sounder/speaker with the CPX panel, you have a wide range of makes CQR, Pyronix, Secware and to be fair they all tend to be as good as one another Hope this helps you Regards Elaine

Hi, Again the choice is yours all speakers and sounders tend to be universal with most panels, CQR, Pyronix or Secware all work as well as one another, it just depends on which one you choose. Regards Elaine

Hi, No you don't need to buy the connectors they are with the panel, and the battery connectors are universal for all panels Regards Elaine

Hi Mahdi, Thank you for that comment, I will mention it to the Tech guys at Honeywell for you Regards Elaine

Hi Grant, Yes the GD-48c as a integrated PSU which is a 2.5A, and it was a good question to ask. Regards Elaine

Hi, The CPX panel will take a 12V 7amp battery (Enersys or Yuasa) and you are best to go with 6 core cable for your dual techs, also the CPX comes with all the manuals you need, so you will be ready to go when you receive your product. Regards Elaine

See attached page 8 of the user manual

Hi David, I will cancel your order for you and our Accounts Department will refund your Paypal, your order was stalled due to being unconfirmed and unverified, so you will need to get your Paypal account upgraded with your details, as this may cause you problems in the future. Regards Elaine