Fire Alarms & Emergency Lighting

We need a 4 zone fire and intruder alarm which can provide a remote alarm via sms/gsm or Internet as we have no BT phone line within the building.

Hi, We have the below smoke detectors set up in a property we manage and I was wondering if there is a carbon monoxide + smoke detector with which we can replace the units in the kitchen and plant room with and will connect with the rest of the system? Menvier/Cooper M12 4 in 1 Smoke Detector for Intruder Alarm

Hi, 5 Zones enabled but only zone 5 is sounding when sounders set off, the other 4 zones are not responding when you set call points off or test the detectors. i also have a earth fault that wont go away i have earth continuity on all zones and at the panel. Its the first time i have installed a 8 zone panel are they much different from the 2 and 4 zone ones. Thanks

Will securitywarehouse be stocking the new twinflex ASD sensor sounder strobes? Im looking for the new twinflex plus 6P panel. Any prices? Panel: http://www.rafikiprotection.com/assets/docs/downloads/twinflex%206p%20cat1.pdf http://www.rafikiprotection.com/assets/docs/downloads/Rafiki%20MP%208pp1.pdf

I have fitted new detector after false alarms. This detector is fine now but other 3 out of 7 are now giving false alarms but these 3 were ok before i fitted the new one. Should I replace other 3 or does this suggest that the new one is not compatible or there is another fault in the system? System is approx 3 yrs old.

Hi We have an alarm / fire detection combination system installed and I need to add two smoke detectors and one alarm door contact. I have found the smoke detector. Menvier M12 4 in 1 Smoke Detector for Intruder Alarm Do you know what door contact goes with this?

I have a 4 zone Bardic Zircon Chloride Fire Panel which the manufacturer tells me is no longer manufactured. It is registering a Power Fault but otherwise perfectly functional. I have replaced both battery and transformer so that leaves only the main circuit board which I am told I can not get anymore. The new Bardic Zircon panel is significantly larger and before I rush to buy one I would like to understand if there are any other options. First does anyone know if I can repairthe existing unit. Second will my detectors and break glass units be specific to Bardic Zircon or could I use them with any other Fire Panel? I certainly want to avoid any wholesale replacement. …

I have purchased a Menvier M12 4 in 1 Smoke detector and now need to try and change the head of it to just a heat and not smoke sensor, as it is located in the kitchen. Please can you let me know if you sell in the same style and size a heat only sensor and if it is possible to simply change the head from the one detailed above to a heat sensor one? If Menvier do not make a heat sensor in this style, do you have one from another supplier which would screw onto my existing Menvier smoke detector body which is already wired in? Thank you

I want to fit some wired smoke detectors to a Galaxy Dimension pannel. Considering Texecom Exodus 4W or Menvier M12. Would you recommend one over the other? Can you explain the difference between Texecom OH with and without N/O relay?

I am replacing a rafiki detector and instructions refer to a head removal tool and an electronic module removal key. I can find head removal tool on your site but not the electronic removal key, can you supply it?

I can not connect the mct-427 to the power master 10. No id for the units in the boxes and when using the instruction of holding down the test button during enrollment in the main panel nothing happens. is this detector compatible with the power master 10?

Hi All, I have just moved into my 1940's semi and now on a journey to turn this beautiful house into the automation house I've dreamt of. I have read a lot on this forum and other websites, and my head is about to explode with information that is not relevant to me hence this post. I am after your advice on two projects - an intruder alarm and external security lights. 1. Intruder Alarm The requirements are: - Sensors (i.e. Heat/PIR) downstairs (Lounge, Hallway, Landing and Extension) - Contacts for windows (Lounge x2, Extension x2) - Camera (Lounge x1) - A Panel (position in the Hallway) - A Main Unit (positioned Upstairs) - A Sounder (positioned ext…

Please could you tell me how i can purchase the CFP708-4 C-Tec Fire panel with a key switch (cfp 708 - 4k) as your site does not give me the option although it is mentioned in the description? Thank you

Can I use the 16way 20amp power supply unit for strip LED lighting which we are fitting in our church auditorium?

Hi, I am working on refurbishing a building to become a small commercial gym in Crieff, Perthshire. I want to install a fire detection system, I’d need two break glass manual panels and then a number of automatic detectors with sounders. The ability to have an alert sent to my phone as well would be advantageous. Is this something you can help me to specify and also is it something my electrician can wire in?

Do you have a wireless smoke detector with a remote sounder that I could use as a separate system? I need it for my detached garage which is some way from the house and am worried that I might not hear a standard smoke detector at night.

I need to add a device to shut down the sound system in a pub. does you little interface relay support this ?

Hi Please quote me on a Fire Alarm system to go in a split building where they require 2 separate panels which will talk to each other. Each panel to have 4 zones and 2 sounder outputs. 12 smoke detectors 1 heat detector 8 sounders with strobes 5 break glass units 1 4 zone panel (other one to be purchased at a later date) 5 Door magnets and power supply to work with fire alarm

As requested please follow links below to the 4 zone fire panels currently available online: http://www.securitywarehouse.co.uk/catalog/esp-fireline-4-zone-fire-panel-poly-p-1487.html http://www.securitywarehouse.co.uk/catalog/ctec-cfp7044-4-zone-conventional-fire-panel-p-1301.html http://www.securitywarehouse.co.uk/catalog/ctec-cfp704e4-economy-4-zone-conventional-fire-panel-p-1304.html http://www.securitywarehouse.co.uk/catalog/fike-4-zone-twinflex-plus-control-panel-p-1312.html regarding the 2 outputs please descibe what the outputs would be for, to be able to help further?

I am looking for a multi sensor with Sounder Beacon

I recently purchased a Aritech photoelectric smoke detector with c/o relay output DP721R, I was wondering if you could recommend a suitable testing kit for this particular detector.

I have been recomended a Redwall LRP404S motion sensor to connect to a light so we can light up our entrance gate when it is opened. They have told me we will need a Redwall interswitch as well. Does this make sense to you and if so do you know which switch suits this light and do you sell them also and for how much.