Fire Alarms & Emergency Lighting

Please register for a login for the Forum at http://www.securitywarehouse.co.uk/forums/index.php?action=register You will then have access to post questions. To post a new question, navigate to the area you wish to post your question and select the 'new topic' button towards the top right of the screen. Give the post a relvant title and enter your question / comment in the main area and press 'Post' Any questions then just email us at technical@securitywarehouse.co.uk

i am a DIYer and would like to add a smoke/fire alarm to an Accenta security panel. Which smoke/fire alarm would you recommend and is the cabling different to the 6 core I have used on the security system? It is a domestic properety so the budget is limited.

Hello, I'm hoping you can assist with a product enquiry. I'm looking for a device to detect the start of a lithium battery fire. I'm keen for advice on if heat and/or smoke is best for this use case. The power available is 24v DC and I'm hoping the sensor will have either a repay or some sort of output I can connect into a monitoring PLC. many thanks,

Emergency Lighting Routine Testing Requirements EN50172:2005 requires that at times of minimum risk the system is routinely tested. The following regime taken directly from the standard shows how often and what should be tested. This is only a brief overview and full consultation with the standard is advised Daily A visual inspection of every maintained emergency luminaire to ensure the lamp is operating correctly and in central or generator based systems that the control panel or indicators are showing normal conditions. Any faults must be entered into the system logbook and a check that any previously reported faults have received attention. Monthly * …

Hello there I've found a cheaper deal for a Rafiki Twinflex 4 Zone Panel.

esp fireline MAG2P, is that for surface mounting or for flush mounting into a cut plasterboard wall?

We are looking for Carbon Monoxide detectors, Smoke detectors, Heat detectors, Smoke & Heat detectors. And Wireless fire alarm system with up to 20-devices for small businesses and private homes.

I have been looking on your website for some standalone smoke/heat detectors for use in a boiler house. Could you confirm that the relay output is volt free and can be used to connected to remote PLC digital input card (24VDC). Aritech Photoelectric Smoke Detector with c/o relay output Do you do a range that is more suitable for an industrial installation like a boiler house? It has to be standalone and dual heat and smoke and have the facility to repeat the alarm remotely via a relay output?

When installing the 205 0001 to a Sita 200 plus panel, can this be installed without software being required?

does the Honeywell ECO1003-A require an eol resistor?

Hi there Is it possible for you to supply two parts for my vigilon compact please? I need a cheap unbeatable price. The parts I require are: VCS-IDOOR Compact 24hr inner door assembly VCS-MCB-N Master Control board networkable (for Compact-24 and COMPACT-24-N) Cheers. if you can do both of these parts for

Can this Texecom Speech Dialler work with an Aico fire alarm system, if connected by the Aico Ei428 relay, (which has a switch triggered if the alarm is raised by the Aico sensors fixed around the house)? 2. Can you recommend a UK monitoring service which offers to take messages from this product and act on them? Texecom Speech Dialler [CGA-0001] - £135.06 : | Best Price Promise | Security Warehouse Professional products

will Apollo heat detector/mcp/optical work with an c-tec cfp704-4 panel. have an existing system but panel is only 2 zone and we require 4 zone and extra detection.

We thought that we had ordered PSD-1 for our fire system, however we have PSD-2 instead are theses compatable with the system or do we need to send these back and swap for PSD-1

Is there any way you can supply a c-tec xfp/afp upload download lead? I cannot find them anywhere!!! Please help!! Can I make one myself?

I AM BUYING A APOLLO 65 SERIES OPTICAL SMOKE DETECTOR W/ DIODE BASE FROM YOU AND I NEED THE WIRE TO CONMECT THE DETECTOR TO THE CONTROL PANEL BUT DONT WHICH KIND OF WIRE THAT I NEED

Can anyone send me any manuals you have for the non addressable Rafiki fire alarm systems and any other information you have on max loadings and cable lengths etc.. Can you use 4 core cable to add additional devices? Do they do a remote LED? Can you use the output module on the zone? Is the repeater fully functional i.e can you silence reset etc Does it meet EN54 standards? How much warrenty do you get? What DB level do the sounders in the call points kick out? What is the hatari sounder used for? Sorry for all the questions but we are possibly going to change from the equipment we usually use and want to no what the panels are capable of.

hi ive installed a 2 wire alarm system and they now have a fire shutter that they want to intergrate onto the system what would i need for this

I am looking to purchase your Rafiki 2 zone Basic starter kit. This will be installed in a town house with a ground, first and second floor. Could you advise if your 2.3 Ah batteries are suitable for this kit? Could you also recommend suitable cable, compatible additional sensors, heat sensor and CO2 sensors for this installation? Finally would this system be suitable for 3 zones or can only be wired for two zones? Finally is the kit batery operated only or can it be connected to mains?

Hi there I am looking to put a wireless sensor; PIR or better still a dual-tec in my Motorhome, which will communicate with a transceiver wired into my Cytech Comfort system. It looks like the Opal RFX - 3 might do what I want at the receive end BUT is this unit only designed for the external PIR's (like the Elite) Opal make. Also, the RFX-3 is slight over-kill budget wise - it looks like it's three channel, I only need the one. So is there another, good quality product, that might fit my needs? There is max of 10 metres between the sensors position in the Mhome and the potential site for the transceiver and I have both N/C and N/O contacts in the panel (plus tamper w…

Hi, I know C-Tec make a Fire Alarm Bell Sounder REPEATER which allows for additional Bell Circuits to be wired into a fire alarm panel. Q) Do you sell such a product or simular

i have SD1+ speech dialler and would like to connect this to my fire alarm panel would you be able to assisst me

Hi, I have installed a Visonic PowerMaster 10 with 2 x external & 1 x internal siren, and also a GSM module for notification/alerts (all purchased from yourselves). I would like to connect a SMD427 PG2 Smoke & Heat detector. Please could you confirm that it is possible to configure this system so that when Smoke or Heat is detected, the device itself emits sound but NOT the external sirens? And that a call/text also be generated via the GSM module? (to clarify, it is not desired that the external sirens will sound upon detection of smoke or heat but internal sounds are fine, also desired that remote alerts are generated - hope that makes sense) Thanks

Hello, Is it possible for you to get hold of the following: Mita 16X10mm mini trunking self adhiesive 15mm. I have found a price of

Hi, I'm interested in buying a complete intruder alarm system based on the Honeywell Flex 20 panel. I want to include a smoke alarm, probably the Honeywell ECO1002 combined photo/thermal unit and connect it to the intruder alarm system. Should I buy a latching or a non-latching base? I'd like to place the order today if possible,