securitywarehouse

Can you please confirm this product is a heavy duty door surface contact, approx. size 20 x 80 x 20mm deep. Also that this product comes as a pair i.e. contact and a magnet.

I am looking to purchase your Rafiki 2 zone Basic starter kit. This will be installed in a town house with a ground, first and second floor. Could you advise if your 2.3 Ah batteries are suitable for this kit? Could you also recommend suitable cable, compatible additional sensors, heat sensor and CO2 sensors for this installation? Finally would this system be suitable for 3 zones or can only be wired for two zones? Finally is the kit batery operated only or can it be connected to mains?

Please advise if you can supply a replacement PowerMax Plus panel (433 MhZ) to Cyprus?

I have a Gardtec 800 system with an 8 way zone expander unit. After a lightening storm the panel comes up with a fault: LEX1 tamper. I believe this is a line expander unit fault. You are selling a Gardtec 02083 Zone expander unit - is this the same as the line expander unit I have (label with EX MO1/11 EN50131-1 PD 6662 G3 EC2 PR5705 Rev 1.0 4390) I would appreciate your help.

Does the Texecom SPEECH DIALLER Text Alerts system send texts directly i.e. when the intruder has already cut all the BT lines & broadband etc, will it still work - does it have a SIM card?

hi i am after a texecom 24 1xd expansion module, do you sell these as you only show the 60 version

I have a few PowerMax questions that I hope you can help me with: - Which frequency band is PowerMax+ and PowerMaxPro operating at? - How much is it for the PowerMaxPro unit (incl. GSM and Powerlink) together with 2 x keyfobs, 2 x smoke detectors and 2 x motion detectors? - Is it possible to connect a Powerlink and GSM module to to the PowerMax+?

I am tring to select an alarm with the following requirements: Up to 8 zones LCD keypads (1) Proximity tag capability (prefer it built into the keypad) Easy to use Autodialler capability preferred but not essential (can add standalone autodialler) Reasonable cost The panel will be in an obscure location which wont be accessed regulary (no need for buttons) so will be controlled/programmed by remote keypad/fob Please advise which items would be suitable

I am trying to get hold of a morley key fob for working electric gates and access doors in our apartment block. The reader is a Morley TM4 Series. Please can you let me know if you have these in stock or alternatively another key fob that is compatable with the reader. We need 6 key fobs. Thank you

hi ive installed a 2 wire alarm system and they now have a fire shutter that they want to intergrate onto the system what would i need for this

I have a faulty door entry phone which is in a office. The phone is a BPT AS E/200 and need a replacement.What units are a compatible replacement.

I require a flush door contact to be fitted to a wooden door. Can you please recommend a product? As I am confused by the terms \\\'Grade 3\\\' \\\'Grade 2\\\' and \\\'Green Resistor\\\' \\\'Red Resistor\\\' I will be purchasing the Scantronic 9651 (not sure if that makes a difference)

do i need to give more details for this question to help you reply?

I am also looking for an internal siren. Would you be able to recommend one suitable for a three bedroom house?

Is the yussa NP 2.1-12 is the correct battery for the Accenta Mini gen 4 and will it fit within the case of the alarm panel? - prior to confirming an order

Hallo, I was interested in the above device. I was needing a relay that would be voltage sensitive switch. Basically I have some electric gates that will have lead acid battery backup. I want to set the system so that if the power goes off and the voltage drops below say 10v, I can use a relay trigger to open the gates and hold them open. Can the voltage trigger on this relay be set to a specific voltage in this way?

i would like to buy a Elmdene Grade 2 Flush Contact do i need to get the one with purple resistors to be compatible with my risco system or would other resistor colors work thanks

Having had a Texecom R8 installed since 1996 the only thing that has now failed is the "5" on the Keypad, so I have replaced the old one with new 2010 version. The swap out has worked fine, but the Red Zone 1 & 3 lamps are on all the time, I have check the wiring and all is OK, and I have done the the scan for Keypads "0 9" from the new keypad, all appears to be OK, but the the Red Zone 1 & 3 lamps remain on (on the keypad) Date stamp on the Main box is also 1996, so is this a backwards compatabity issue with the new keypad and the old main box?

could someone please recommend a backup ower supply suitable for the Risco Gardtec Eurosec CP8L

You have issued me with a new log in password but it doesn't work !!

I am a returning customer and i am trying to log on to make a purchase. My password does not work so have requested a new password. The page says one has been sent but i have not received it.

my customer has a accentra mini 8 alarm system, the external sounder appears to be faulty. Can you supply a replacemnt sounder. If so can i replace old with new wire for wire without instruction? The existing sounder has security alarm with a man climbing through a window logo on it. hope this helps?

I cant seem to find the following items on your website. 2x Texecom Ricochet Wireless Magnetic Contact -W - GBC-0001 4x Texecom Ricochet Premier Smartkey Wireless Iconic Keyfob 1x Wilress Receiver 32xp Can you source these items?

we would like to fit a wired Alarm system, we have made the following list of items We like the look of the scantronic 9941 box as we would like to put a TSD2 speech dialler on so that we can telephone and check the system remotely. > > We would then like to put a remote keypad in the porch area at the front of the house which we would like to have night set options. We would also like to have a personal attack button and maybe a keyfob to de activate the system. We would like an internal sounder but maybe this is built in to the system. > > We would like a siren and strobe sounder on the front of the building. > > Detection Points > > Front door concealed magnetic contact / final exit > > Dining room integrated quad passive infa red & microwave technology PIR > > Lounge integrated quad passive infa red & microwave technology PIR > > Family room integrated quad passive infa red & microwave technology PIR > > Kitchen integrated quad passive infa red & microwave technology PIR > > Study standard quad passive infa red PIR > > Utility Room (has obscured glazed door to side passage) not sure whether PIR or door detector is better > > Main bedroom intelligent quad passive infa red PIR > 24 hr personal attack button > > Landing standard quad passive infa red PIR > Garage up & over door heavy duty magnetic reed contact > > Garage side door opening onto path down side of house surface magnetic reed contact > > > > > Perhaps you can advise us further and put together a list of all the components we will need. I do not understand the difference between all the PIR\'s suggested so perhaps you can help. It was suggested that the bedroom and landing PIR have a night set function which I assume means that all the others remain active but these are inactive during the night. I am hoping as said above that the control box can be hidden away but maybe you could suggest the location of the speech dialler. thanks for your help.

I would like to order some Bosch Blue Line ISM-BLD1 TriTech Blueline Detector. These are available in three frequencies. I'm interested in the 10.525 GHz ISM-BLD1- F1 model. Would you able to supply this model ?