Secware_Tech6
-
Posts
242 -
Joined
-
Last visited
-
Days Won
12
Content Type
Profiles
Forums
Events
Posts posted by Secware_Tech6
-
-
1 hour ago, Secware2 said:
The diagnostics on the panel report that the comms are all good. The LEDs on the A083 also suggest everything is OK (Green on 0.1, off 0.9 sec)
Just to be clear this only shows the data connection between the panel and the module. Not any other monitoring etc.
What is the 3rd party service out of interest?
Can you ping the local IP on the lan?
-
Are you using this with the honeywell cloud service?
-
id start be disconnecting all and running the keypad on a short length of cable to prove that first of all
-
id suggest an active beam connected to a basic control panel capable of 'chime'
If these are the only requirements id look at the optima compact, takex beam and an internal speaker plus battery etc
-
Yes. You will need external resistors as the detector does not include them. The dc950 might i dont know the unit
-
Which version?
-
Might be an idea. What is displayed when arming area A?
-
Test received
-
1
-
-
a 610 is just the detector where as a 620 is integrated detector and analyser. on the gs610 there will either be an analyser in the panel or the panel has built in analysis
-
It depends really on what its transmitting to?. I would normally use a HKC but thats for a HKC receiver. You have to match transmitter and receiver types etc
-
Your maintainer is best to advise.
Brown/white/grey etc are all the same detector in different housings. Assuming you have an analysed panel then yes they can be swapped.
-
Lots grade 3 is designed as a product standard but it's mainly part of a system standard. While a grade 3 product is better than a grade 2 product there is little between them. Yes a grade 3 product is better than a grade 2 but the system design is more important than just product choice based on grade. There is grade 3 compliant equipment I would never use on a. Install. Does that help?
-
I would like to install a burglar alarm in a clients workshops! They already have Hikvision cctv system and proximity alarms and electronic gate which are the better alarms. I was looking at Pyronix or Ajax but I saw a comment from your store on a forum saying Pyronix were a little limiting are Texecom better Ajax are more expensive!!! Please give advise!
-
assuming the device is programmed in correctly currently then yes
-
Assuming its not a locked unit (some installers have their own freq and firmware and its le sucre based then the peripherals should be ok. Id check with the installer first or check the models etc
-
thanks for the follow up
-
Im afraid the prox reader for the accenta is now obsolete there isnt a way of doing it on that panel
-
No the solitaire is a built in controller and remote, whereas the digizone is just a remote.
How is it cabled? ie where are the cables currently run
-
-
-
-
-
-
[Ticket Question] Line Fail sensing
in Intruder Alarms
Posted
Ah great
Stuart does come on here (from selfmon)
dest unreachable or timeout with regard to the ping