Secware_Tech6
-
Posts
243 -
Joined
-
Last visited
-
Days Won
12
Content Type
Profiles
Forums
Events
Posts posted by Secware_Tech6
-
-
Sorry about this. Do you know your order # and I will start a support ticket.
-
In its budget I'd stay with. Widely popular solid unit. How old is it out of interest?
-
There should be a device listed as well showing which one or ones are in low battery. You can also check from the engineer menu on a per device basis
-
Have a look in the event log to start with. Post what's in there.
-
No it is not grade 2
-
The higher the grade the higher the security level. If you don't need wireless bells I'd look at the galaxy with portal
-
Both have good wireless options but id be wary of anyone giving away apps for free etc. These things do cost to run and often the free ones have less reliability.
-
Do our members want a new product review? I have a few ideas but you know best, let me know on pm or post
-
Have you enabled any squark options?
If not I'd default by a clean start and re add just the bell
-
I'm sorry I don't understand 'bare wire'?
-
Yes, but we are a trade supplier. You should ask your installer what equipment they prefer etc
-
What panel you connecting too?
-
How long does it activate for if you leave it?
-
Yes but any double pole panel would be OK, ie honeywell accenta
-
I must admit nor me. If the fuse is in tact I'd check the trace. If you meter on other ground etc do you get a reading. I cant recall but are these power connectors on plug on blocks?
-
It should be low ideally less than 30
-
Just an fyi a contuinity beep can be over 1000 ohms
-
No I'm looking at the resistance reading if the fuse itself. You have either a fuse related issue I think
-
I'd be looking at the fuse for that then. Did you take a reading or just use the beep function on that fuse?
-
OK. Check 12v is available on the panel keypad connections. If so I would use your meter to check the cable continuity
-
id shorten the conducters you have a high risk of shorts from the images provided.
regarding the keypad never connect direct to the battery as there is no fuse protection. I would check your 12v out from the keypad connection in the panel, id assume a fuse has blown
regarding the sensors. Be best to start a seperate topic per issue to save it becoming muddled
-
2 hours ago, kyrusdemnati said:
However when i open the door, the system doesn't give me a countdown to enter my code to switch off the alarm? (it used to do this before)
Check circuit time is final and what is the entry time set up. Also what is logged when this occurs
QuoteWHAT MODE SHOULD THIS BE ON? i think i have set this as timed
its the circuit type that will be set as finel the area setting mode will be timed
2 hours ago, kyrusdemnati said:I do have a bell box, but i need to get a ladder and learn the device again. What mode should be set too?
it isnt programmable iirc it should be a tamper
2 hours ago, kyrusdemnati said:My backlight display on the device, times out so its blank after setting an alarm how do i make this visible at all times?
it should do that to comply but you can change it in system displays
2 hours ago, kyrusdemnati said:Upstairs WindowBack Conservatory Doorwhat mode do i need to put this on?Intruder
-
It does sound like there is an issue with either the keypad or the panel then unfortunatly
-
I'd first look at range and or interference. What happened locally in the build up to the fault. Also have you tried temporarily relocating the keypad and power cycling
Ticket Question [Dual Com]
in Intruder Alarms
Posted
Yes, you would be the 'customer" to us