Access Control

We, at the Swindon *********** *** have a 2000 Series access system, for our 1200 members, unfortunately the Card reader on the above appears to have broken down, with no 12v power supply to lock release. Can you please advise if a replacement part is available. The current unit operates by cards produced by EBF Card Systems

hi there, i would like to buy that came fast p automation kit. DOES IT LOCK ITSELF WHEN THE GATES SHUT? HOW LONG WOULD IT TAKE TO ARIVE WHEN I ORDER? WHAT IS THE DISCOUNT COUPON AND WHERE DO I FIND IT? please let me know. regrds kostas

Hi I bought the Prox10 kit from you, and was wondering what cable should run to the keypad/lock release. It's only 12v/1amp - does it just need something like speaker cable or .5mm T&E, or is there a "proper" spec that I should use Thanks Chris

Hi, i am looking for a euro cylinder 30mm/40mm to suit my existing keys and euro locks. Is this something you would be able to help with? if so what what i need to send you and aprox how much would this cost for your lowest price cylinder. many thanks, Nick Robinson

Dear sirs, I need to know more details about out put data format of these devices as I need to intigrate these devices with our computer control system Thanks

i have a garage , the garage is not connected to the mainbuilding. can i use a visonic remote to operate the garagedoor ? the door is operated by remote today and it has a switch inside the garage , one push opens, another push close the garagedoor. if this is possible, wich remote do i have to use and what do i connect the garageswitch to

Hallo, I was interested in the above device. I was needing a relay that would be voltage sensitive switch. Basically I have some electric gates that will have lead acid battery backup. I want to set the system so that if the power goes off and the voltage drops below say 10v, I can use a relay trigger to open the gates and hold them open. Can the voltage trigger on this relay be set to a specific voltage in this way?

I recently received and installed a new videx 3011 handset, which i had ordered from yourselves. Everything on the handset seems to be working fine apart from the buzzer. Whenever someone hits the buzzer button downstairs, my handset just seems to make a faint clicking noise instead of buzzing. Is this a fault with the handset or a fault with the way i've wired it up?

I have a faulty door entry phone which is in a office. The phone is a BPT AS E/200 and need a replacement.What units are a compatible replacement.

We Have a BPT system installed at our main entrance and i would like to change the access code as we have had a member of our team leave recently. We have no documentation to follow to allow us to change the code. Please could you assist in this matter.

Hello. My BPT A/200N (number 61404810) has one internal phone wired to the intercom located next to the gate to our property (single dwelling). I want to add one additional internal phone in another room of the dwelling (three phones are possible). BUT: I cannot run wires for this new phone back to the BPT A/200N powwer supply unit. Please advise me what I should purchase from you to do to this by wireless. Many thanks, Glenn

I purchased from you 2 intercoms : http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=134 I need one more but with 4 internal handsets.

This topic has been moved to Intruder Alarms. [iurl]http://www.securitywarehouse.co.uk/forums/index.php?topic=603.0[/iurl]

Hi, is the Honeywell 20, (panel only) compatible with the RKPs and Proximity fob pads that I have with my Accenta G4 ?Thanks

I would like more details on the above lock, the description on the site indicates a weight of 4kg, the one we need to replace is only about 1/2 pound, could you let me know the size etc.

I have many ACTpro 100e devices connected to ACT Win Pro Software. This occurs in several places in Greece. How can I connect all ACTpro 100e devices->to local ACT Win PRO Software. and all these places to be controlled from a central location throught the web?. Explanation: Suppose you have an administrator software in one location, for all different cities in Greece. This administrator software must control through the WEB all ACT WIN Pro(s) (which 100e are connected with RS485) in all different cities. Which is the administrator software I can use? Please avoid teamviewer style software.... If I am not clear , for what I need tell me so...... Also I can provide …

I need a Videx CESVK-1-eclipse intercom but with built in keypad? As the picture on your website does not show a keypad i wondered if this was possible.

Hi, I have installed the system purchase last week, no issues, just a small question. Is it possible to switch off or time out the LED lights on the keypad, or are they on all the time? Many thanks

I have just obtained a second hand access control system (partly manufactured by Dantech) It has a DA371 PSU and another circuit board for the connection of the card swipe/proximity reader, maglock, emergency access release, normal internal release etc. The problem i have is that i have no wiring instructions to enable me to connect all of my devices to it for my small premises. Can anyone help please. Thanks PJ

Looking to update current system with the Bell BS4 Bellissimo 4 Station Video System

First one is I am replacing an old alarm and want to keep the cables but its it's in 4 core can I wire with outbthe tamper? And if so on the panel do I wire each circuit power directly to the 12v aux on the control panel and the two others go straight in to the zone ie zone 1

http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&cPath=27_29&products_id=1335 can it programeres with 2 different code, I thinks one code that can lock the dore, and another code to both dore and whole Alarm on / off

I need to replace a videx front station, that appears to be the one button audio + code lock, and need to expand the system to a 2nd entrance, I saw a 2 door controlleer on your site, but that said it was for prox tags.. can you advise what component parts I require.. I assume the controller has clean contact relays for use with maglocks and aux PSU..

Hi just been asked to add 3 extra hand sets to a videx intercom system model DK1S will the Videx 2 button telephone c/w AC buzzer & mute switch Model: 3102 work with this system ? thanks wes

Please could you advise if the targha BPT audio intercom with keypad system would work with any electromagnetic lock and exit button device? Also, I am rather ignorant on these systems, is the double electromagnetic systems shown on your website used for double doors? If so, we have a leading gate for pedestrians if the non leading gate is held by a ground bolt will this work? Thanks