Intruder Alarms

Does this come with a battery ?? If not, which one do I need to order for it. Which Remote keypad do I need to order for it.

I have bourght quite a few of these & on wiring & checking them find none sound when tested. All you get is a constant lit LED. Is there a possiblity that all are faulty or has someone designed the ultimate pointless product? If one went into alarm I'd expect all linked alarms to sound. Is this not the case with all linked 12v linked detectors?

My current alarm Guardall Rascal Super is broken so needs replacing(we are using 4 programmed zones and chime). I'd like to replace the control unit unit and bellbox but use existing wiring, sensors and internal speaker. I'm looking at the MDT Avanti 8 and AG6 bellbox (current bellbox looks tatty and has no strobe). 1. Is the chime quite loud? We would like to hear if someone enters the house from the other side of the building. 2. The Rascall Super system is 12v and I think the Avanti 8 is 13.8v, will our existing sensors work with the new control unit?

Can I connect a telephone dialler to the Optima 8EP396A . The instruction manual says the communicator is not fitted to the Optima Compact.

Hi, I am installing a Honeywell G2-20 alarm system at my home. I currently have two iWise 800QG3 movement sensors and am looking at installing an additional four to the system. I am considering purchasing the following detectors. https://www.securitywarehouse.co.uk/catalog/bosch-blue-line-gen-2-bld2-pet-tritech-blueline-detector-p-2392.html I understand TriTech is the best class of motion sensor to reduce false alarms. Is this sensor recommended or would you recommend something else? Any advice is much appreciated. Kind regards,

hi I was just wondering what control panel I would need to buy with the Klaxon 127Db 240v High Output Master Blaster Siren (12v Relay)I will also need 2 P.I.R's. thanks in advance.

Does anyone know anything about this alarm system? It just keeps setting itself off without us setting the alarm. Its keeping us up at night and im getting desperate. Someone please help with any knowledge at all. Oh and it doesnt let us reset the system at all!

Good morning I wondered if you could help, we have fitted a ali door to a business which has a Chubb alarm system, and the Chubb engineer has said the below. "The lock or keep needs to have an integral micro switch contact on it to provide electrical connections. Giving common, normally open and normally closed options for the connection onto the alarm" I could really use some help with this from someone who knows, I do have pictures of the door if i can send them across to you. Wondered if you had i stock or could get what i need, Thank you

Do you sell both MCT-302 and MCT-302T? The information in the text on the site talks about both items but in the end it is indicated that you only sell MCT-302. Is this correct?

Hi, I\\\'m after a reliable wireless system, 5 zones down stairs one of which is a gargae, 1 zone upstairs but a pir would not be suitable in this area. The sounds to be wireless operated but mains powered. I\\\'d prefer a keypad activation & deactivation. Also is there a posibility it can notfiy you via text if your alarm is going off.

Having just been burgled I have purchased a KX15DATM pir from you to replace a failing unit from a different manufacturer. The existing unit is connected via 6 cables - 2x Tamper, 2x Relay and 2x 12v. Do you know what connectors the cables need to be screwed into on the KX15 please? I may also have to change some of the dip switches? The control panel is an Accenta 8.

Hello I need to replace an wireless siren MCS-710 with a new model MCS-730/740. The control panel is a PowerMax Plus SN:15408.9BA2 JS700611 V3.4.08. Can you confirm that the MCS-730 and or MCS-740 are compatibile?

Hi, I hope somebody can shed a light on this fault I have on the Texecom Excel panel. Installed this on Saturday but Zone 6 keeps triggering after being armed after a few minutes. Checked the Pir and that seems OK. So removed the Pir in circuit and strapped a 10K resister in Z6 but still activates after a few minutes. Is there a simple solution to this or a faulty panel. All other zones are working good. Using EOL method. Thanks in advance.

Can anyone recomend an alarm system that will notify by text message for alarm triggers including set/unset (ie access to the premise) I currently mainly fit texecom products and have used voice diallers regularly but a client now wants that bit more! Any advice welcome Thanks

texecom odyssey bell box appears to be faulty, I have checked the voltages and the tamper circuit but the bell is active constantly. Is there anything that can be done about this?

I am looking to upgrade my scantronics 9800 alarm system to remote control arm and disarm. I want to keep my exiting pir's and door contact and outside siren/ strobe box. Also I would like to keep the option of the keypad as well. I was looking at the LGSIX/01 unit. Will this unit do what I want. Also do you do any other remote control units that will work with this unit.

I am interested in this product https://www.securitywarehouse.co.uk/catalog/intruder-alarm-c-36/wireless-ia-c-36_60/takex-wireless-ready-external-pet-tolerant-12m-pir-dual-head-p-2040.html I want to buy two wired sensors: https://www.securitywarehouse.co.uk/catalog/intruder-alarm-c-36/movement-detectors-c-36_116/all-c-36_116_37/takex-external-12m-pet-tolerant-pir-dual-head-p-2038.html and two wireless sensors (the first link i just sent: https://www.securitywarehouse.co.uk/catalog/intruder-alarm-c-36/wireless-ia-c-36_60/takex-wireless-ready-external-pet-tolerant-12m-pir-dual-head-p-2040.html I want to connect those wireless sensors (as above) to a Paradox EVO 192 centr…

Hey, My old ademco accord has stopped working due to the transformer being broken. I am now looking to install a new system myself using existing wiring etc, but I'm not sure what system would be most suited and easiest to install. I am thinking of either Texecom VERITAS R8 or the Scantronic 9448. Any advice, tips or help would be appreciated. Ta.

Was wondering if anybody has detail for the Scantronic Plug-in footprint used by the 960? I wanted to hook this speech dialer up to an alarm that does not have the Scantronic footprint. If I could get hold of the spec for the two connectors of the 960 I could then jury rig a connector (or spade terminals) to tease out the 4 standard triggers as well as the line fail signal. I could also take care of any other inputs that need to be dealt with. Any ideas? I've done an extensive web search for detail of the footprint but have not found anything. Thanks John

Hi I want to add a magnetic lock that released when the panel is unset. I see there are 2 outputs on the Premier 48 both that can take 1A but this seems alot. is it really ok to wire directly on to the pannel without needing a relay. Im thinking of running the SSP Mini Magnetic Lock unmonitored on the door conserned. if I do need a relay do you have a prepackaged one with power supply etc? Any help apprecated. Rob

I am about to order the Scantronic Homelink 55 from your site but have a couple of questions... Can I add an extra keypad with prox reader? The description of the Homelink mentions only the 9940 and 41 but they are no longer available I think? Will the Scantronic PIR's (wired types) work OK with the system, as I only need wireless contacts for the doors, all other sensors will be wired? Any recommendations for a suitable external sounder?

My system is showing a fault "Telecommand Batt Low" which refers to the 723r Telecmmand remote setting device. I have changed the batteries in the 3 telecommand devices I have however the system continues to show the error. I have moved the system into Engineer mode and it will not now exit. Going through the command set to exit Engineer Mode ie 99 tick, the systems goes through the "checking system bus" bit ok and after agreeing to "exit eng" the unit starts the "Checking System" routine and then flags up the "Telecommand Batt Low" problem again and will exit the Engineer Mode. How do I get out of this, as I say I have put new batteries in the remotes but this does not …

Cannot get the Panel to do what the manual says it should on Power Up and Walk Test. I only have the Entry/Exit door switch wired to the panel to ensure easy diagnosis.

I need cable and software to program Galaxy 2 over PC, Please let me know what kind items do I need.

Hi, is there a way to gather more logs for zones that it is currently available? I have 4 zones and there is 250 logs for each zone.