Intruder Alarms

I have recently purchased a Honeywell Accenta Gen 4 Alarm panel from you. I now find that I need backup battery for this panel. Can you please advise which one will fit and do you supply it.

Scantronic EXCELR 12m Wireless PIR will this work with my scantronic +500r panal please advise the frequency your help would be appreciated

can you tell me if the Flex 20 Mk7 can have a lan connection plugged directly in to the unit or do i need to go through a wall port connection? Thank you https://www.securitywarehouse.co.uk/catalog/intruder-alarm-equipment-c-36/security-control-panels-c-36_102/1124-input-zone-medium-c-36_102_103/honeywell-flex-20-grade-2-20-zones-metal-box-mk7-p-5337.html

I am upgrading the alarm system in my home and I am looking for... 1/. A quality detector to use in my conservatory which, being on the SW side of the house, experiences very high temperatures in the summer the obvious changes from direct sunlight to shade. I also have a problem in that the ideal location - where the sun will not strike the unit - has a piece of furniture obstructing. So I can only site in a position where at times the sun may actually strike the unit. Ideally I would like a unit that incorporates glass break detection 2/. We have a log cabin. I am concerned that - should anyone decide to enter one of the methods they could easily use is a battery…

Hi again, i should of asked in my original post, but does the above panal come with fitting and user instructions? Many thanks, Derry. p.s. this kit is

Can you please confirm this product is a heavy duty door surface contact, approx. size 20 x 80 x 20mm deep. Also that this product comes as a pair i.e. contact and a magnet.

I moved into my current property and had an extension done to the building. As a result I haved added detectors (from SecurityWarehouse) to the alarm panel (Honeywell G2-12). However, when the alarm engineer attempted to access the menu, the code I was given was not working. Hence the engineer is locked out of the menu What is the best way to get into engineer menu and reprogramme the panel? any help would be appreciated?

Looking to fit a low cost wire alarm into a small 2 bed house. Need 2x door contacts, 2 PIR and 1 sounder. Ideally I would prefer a seperate small keypad, as there is little room in the hall for the panel, and would like to add in 2 smoke detectors. Price is key, could anyone recommend a panel or kit.

Hi there, i bought one of these pirs in my last order. I fit it and was sure it was working but i tested it the other day and it doesnt seem to be working correctly. It does not trigger the alarm, seems that it is permanently closed. Is there something i need to do, ie change the factory settings on the sensor or does it need returning? Regards

Can you tell me if the Honeywell AC030 alarm button can be wired with just two wires? My current one which I need to replace only has two wires connected to it and the tamper function when removing the cover still works.

Bought a exodus oh/4w smoke detector to link to a Texecom Veritas excel Connected as follows but getting no audible sounder just led's lighting on test Panel zone 3 Panel zone 3 c- No connection D-0v on panel E-12 v panel F-latch input on panel +sw any ideas as i have tryed all that i can think of even programed remote keypad to identify fire instead of guard . cheers jock

I have semi decieded to purchase/install an MDT alarm system and will be connecting a stand alone autodialler also I have used Texecom speech only recently but am curious if there is an easier to use alternative available? Do all autodiallers require you to record a message during installation or are there variants that come with pre recorded messages? Thanks in advance

I recently bought a "ADE Optima Compact 8 zone control panel with onboard keypad" Secware Optima 2 x PIR Full Kit from you. I would like to fit two ADE Activ8 standard PIR Complete With Pet Immunity Facility sensors, do I need 8 core wire, as with the kit came 6 core Thank you

I bought a powermaster 10 kit and i have a auto test alarm thats sends to my phone on strange dates (23-10-12, 07-01-13, 03-04-13). I have looked everywhere in the menys but can´t find any autotest meny with that kind of options of dates?? Also my powermaster hums alot from the Power unit, is that normal?

Hi, I'm going to replace my existing (faulty) Eurosec CPX alarm and I'm intending on purchasing the Texecom Premier Elite 24-W Kit from you: 1 x Premier Elite 24-W Complete Kit (GED-0013) 5 x Premier Elite Ricochet Impaq (GBB-0001) additional sensors for the windows (impact) and door (using the included magnetic contact) 1 x Premier Com2400 (CEC-0001) for communications I have a few questions though: Will the com2400 fit inside the control box supplied with the above kit? Which backup battery should I purchase for the control panel? Can I use my existing external sounder or should it be replaced with a new Texecom Odyssey Sounder (either wireless Ricochet…

I am looking at purchasing the Honeywell Galaxy Flex 20 UK Panel together with ESP Fireline smoke and heat detectors. Can these be used in conjunction with one another i.e. integrate the detector system into the alarm panel, setting it up as a fire zone? Or are the ESP Fireline detectors only suitable for a fire panel?

I have a few questions about this product that I am hoping someone can answer. 1. The product has an in-built microphone. Is it also possible to attach an external microphone (like Texecom's voice dialler)? 2. Are the remote functions (e.g. memo playback, listen in etc) accessible through both the GSM route and the normal telephone line. 3. What's the best method for provide back-up power? Thanks.

Can you please advise me on the best battery choice for the above system so I may place my order, and advise me on estimated delivery times. Many thanks. Derry.

I'm tring to programme the bell time on this panel in engineering mode. When I press "6", LED's 1,2 and 3 should show but I'm getting 1,3,5 and 7 and then it won't go any further. Does anyone know what this means and why it is happening?

The transformer has failed in my old alarm. Looking at the Veritas Excel. Is this a straight swap? To the new alarm panels come with the battery or will i need to get one. Regards

I was wondering if the Powermax Pro kit you sell supports Partitions? As the description says its optional. Thanks

please could you supply information on internal wiring of contact as I can not explain to my engineers how they work when connecting 2 contact together we have wired them and are working BUT not sure how wired in side contact ?

Hi all can any one help me i have just taken hold, well waiting for del of a new risco Prosys 40 Alarm Panel with Remote Keypad and tags of ebay cost

anyone have a user panel or eng for the europlex technologies verifier intruder panel, thanks

Hi I have just ordered a texecom odyssey 3E bellbox. I was going to buy a 4E but the neighbours strobe is totally invisible in daytime so you cant identify where the irritating wailing originates from unless you live next-door!!! How bright are the strobes on these units? Can I have it so it is powered ONLY from the panel (accenta G4) and not the internal battery? Is any fixing equipment included such as wall plugs etc..? oh and is the strobe LED or xenon??? Has anybody got datasheets for this unit that I could read up on?? Can't seem to find any!