Intruder Alarms

will this alarm box be compatible with my avanti sytem.I have an MDT bell box which is no longer working, I have tried running a 12v supply to bypass the battery,the green/red lights come on, but no sounder. thanks https://www.securitywarehouse.co.uk/catalog/intruder-alarm-c-36/sounders-c-36_45/external-sounders-c-36_45_140/pyronix-deltabell-plus-external-sounder-back-plate-blue-p-2867.html

Maybe unwisely, I have bought a used SD1+ Speech Dialler to replace a twelve year old model that failed to respond to all the helpful advice you gave me back in February. I have carried out a factory restart, as described in the manual, and have created a 'NEWCODE'. However, when I try to program telephone numbers from 'READY' and press'ENT', the LCD still shows 'READY'! Again from 'READY', if I press 'O' 'CLEARBY' is indicated. But pressing 'B', 'CLEARBY' still remains on the LCD! Please can you help me!

i need to replace 3 fire sensors at home that are compatible to my house alarm system. it is a sterling 10 by pyronix. i am told they have to be normally closed. can you recommend a sensor

Hello, im intrested in a vsonic kit with gsm module, does it have gsm already installed or its extra purchase. It should work on 868mhz. WHich one do you recomend with theese demands, kind regards

I have changed the battery in both of my arming stations and now the Homelink 75 does not see them, I have followed the instructions in the Installation & Programming guide, but am currently baffled where it states to activate the tamper switch on the arming station, but where is the tamper switch? I have tried pressing each button, two buttons together, removing the back so as to disconnect the battery, still the panel does not see the arming station. I have checked the battery voltage which is 3v as they are new batteries. None of the arming station lines- 1 to 4 in the display panel has an icon against it. Even my alarm service engineer who had no…

Hi, just been delivered secware optima2 pet kit to replace old optima system. Wired unit fine, now trying to wire siren. Old siren has connections, linked to wire colours in () Strobe + (White (strobe)) Strobe - (lt Green (strobe)) T (Blue (scb)) E (Yellow (scb)) A is linked back to E via metal loop D (Red (bell)) R (blk (bell)) New siren has: ST- R- SW- V+ V- The given instructions are for the Optima XL4 and don't seem to make any sense. I seem to have 6 wires, and only 5 terminals. Can you help?? Looking again and researching on the net forums, I'm now thinking: AG6 Optima ST- to Strobe- (Lt Green) R- to T SCB (Blue) SW- to …

My Honeywell Optima Compact intruder alarm system, now 16 months old, is activating tamper alarms at random times, in both Day and Set modes. These reset straight away. I have linked out the panel terminals for both the sensor tamper loop and the remote LCD keypad tamper loop, which takes a wiring or tamper switch fault out of the equation. The tamper alarm still activates every couple of days (or nights .... it went off at three this morning!). Question; does this indicate a control panel hardware fault or a software fault? And if the panel is faulty, is it still under warranty?

Hi I have been roped in to help a friend that has an alarm panel that has died. I am looking for a panel that is 1. Easy to install 2. That can work with Biscuit ID wired sensors 3. Not expensive I think it is 6 Zone. Any ideas?

Hi I'm looking to upgrade a Texecom Veritas r8 with pet PIR. Do you know if the following is compatible (Bosch Blue Line Gen 2 BLD2 Pet TriTech Blueline Detector ISC-BDL2-WP12H )

I have an existing Accenta Gen4 Alarm Panel - 8SP411A with 8 wired sensors. I want to replace the control box with one that has a LAN or WiFi interface for connection to my local LAN and is capable of sending alerts via email and has a web interface contactable on the WWW. I want to retain my wired sensors but also have the option of adding additional wireless sensors. Can you recommend a suitable control box?

I bought a Texecom IMPAQPlus from you back last year and you gave me help with the wiring for double EOL, unfortunately my builders have pulled the wires out and I can't remember how to wire it, I know I had to put a wired link in, please can you remind me on how it should be wired. Thanks

Can Honeywell easy set fobs be used with ADE Honeywell Accenta Mini Gen4 system..alone . or is some extra sensor / equipment needed

I have a system in a gun club that uses the scantronic 9800 which is now becoming unreliable due to its age. It is also in a humid environment which does not help! I would like to replace the unit with a new one so am interested in the 9752. Could you tell me if this is a good choice and if it is then can I (not an alarm engineer but good with electronics) swop the unit over easily. Thank you for your advice. S. Cooke

Hi I have a powermax 10 with a GSM link we bought right before Christmas. Up until a couple of months ago, it cannot receive SMS commands any more. At first I thought it was something with teh phone operator, and I have been in contact with them. But now I think it might have to do with the GSM module. I'm not sure. The strange thing is that it will send SMS messages, because I receive status reports and auto test messages and such. And if I arm it manually on the display, I will get an SMS. However if I reply to it and say STATUS and my code, I never get any replies and nothing happens. Please advise. What can I do to trouble shoot it?

could you help me identify location of the "auxiliary power fuse"in control panel. I want to remove it while I replace PIRs.

we bought a galaxy 2-12 C012 some time ago and when we are trying to enter with the engineer code it is saying invalid code is there a way how to factory reset so the codes will be all reset please? it is a galaxy 2-12 honeywell intruder alarm panel

I have recently installed several of your Pet immune pirs, however the alarm keeps on triggering when my two cats are in the house and the alarm is set. My question is, are they only pet immune to a certain height so if the cats jump up on a chair they will trigger it?

hi can anyonehelp i was installing a dc dialler and the led and back light were flashing as i was programming it the power went off and no it won kick back up again any ideas..cheers Kev

I need a new alarm panel with voice gsm support for at least 16 hard wired + wireless. I did not know if I should get a gsm voice dialer or a new panel.

I bought Wintex UDL from you, I downloaded it to my laptop. When I wanted to unzip it I got a warning that archive can have wrong format or file is broken. What is wrong?

Hi - just wondering if the G4 LED keypads for the Accenta are compatible with the G3 RKPs/systems? Also, do you sell these G4 RKPs seperately?

On the Accenta Mini Gen 4 Panel there are 2 U shaped staples connecting the tamper circuits for the keypad and siren. Should these stay in place at all times or be removed when the keypad and siren are fitted?

Hello I'm rewiring my house and as my floorboards are up and walls chased I have decided to install a burglar alarm. I'm going to go with the Castle Care Tech Euro 46. I have a few questions, should I use 6 or 8 core wire? I'm pretty sure everything wires back to the Control Panel. Finally does the control panel come with a keypad because I would like the flush satin chrome one. Or does it come as a second input device therefore I will have 2 keypads on the system I hope you are able to help with my questions Regards Jasdeep

I am struggling to find information on how to wire the Pyronix Deltabell Plus to the Honeywell Flex 20. Also i would like to know how to wire the Honeywell DT8012F5 DUAL TEC Motion Sensor with Pet-Immunity (DT8012F5) to the Honeywell Flex 20 panel. At present i have connected the positive and negative to +12V and 0V. I have connected the NC to 0V and put a 1K resistor at the sensor to C, and then again a 1K resistor from C to Tamper. The problem i have is the sensor doesn't have a Fault terminal to wire to zone 1.

1 x - Scantronic 9651EN-43 (9651 c/w 9943 rkp) 1 x - Secware Flex Tag Pack 10 1 x - Honeywell Reson8 Bell Box 1 x - Honeywell Reson8 Dummy Box 1 x - Secware KSB2 Sound Bomb 2, Quad Piezo Internal Sounder, 12VDC 7 x - Honeywell IS3012 PIR Motion Sensor with Pet-Immunity 2 x - SECWARE D20 Surface Contact 1 x - Scantronic 9941 LCD Keypad Im looking to purchase the above items, I have cable. will all this work together also the tags on both keypads?