Jump to content
Security Warehouse Support Forum

Secware

Moderators
  • Posts

    68
  • Joined

  • Last visited

  • Days Won

    16

Everything posted by Secware

  1. I have installed veritas r8 panel last year , I was wondering if it is possible to somehow have it so it contacts my mobile phone through my internet router when going into alarm mode, I know you can get a communicator , I have used these in the pass, but I do not have a land line anymore, like many people I use mobile phones, hard wired to my router would not be a problem , your help / advice would be appreciated ,
  2. Hi, I have a Honeywell Flex 20 C005-E2-K04I with Mk8 Keyprox Keypad and Ethernet and I am looking for IR detectors. what do you recommend? I am not interested in wireless detectors, could you please also advise which smoke detector, door magnet and RF portal card is required? Doesn't have to be Honeywell.
  3. Hi, I was looking at something like the Scantronic 9651 to replace my faulty C&K Securitech 700L control unit. However I was wondering if there is something I could get that would replace my control unit and use my existing hard-wired PIRs, door contacts etc., but adds 'smart' functions like alerts to smartphone when the alarm goes off, remote unsetting to let a neighbor in etc.? Thanks in advance for your help.
  4. What is the difference between Texecom Premier TD-W and GJD D-Tect X wireless? Are they both intended to perform the same job? Is there any drawback for Texecom product compared to the GJD one? How can i choose between these two?
  5. I am after a vibration sensor to fit to my roller shutter garage door to detect attempted forcing of the door. Do you have any products that detect vibration to the door itself rather than the frame: concerned that a frame mounted sensor may not be sensitive enough. Standard wired honeywell Optima alarm panel.
  6. I'm looking to spec up and purchase an alarm system for my house. I need a panel with 20 WIRED inputs, 2 keypads, and an extrenal sounder. I'm looking at the Honeywell galaxy flex system with the KO7 KP and ethernet interface, so we can use the Galaxy app to moniter. Please could you advise which products I will need for this package, and if you will despatch to my address in Greece. Thank in advance.
  7. The unit we received is a EE1215W Universal transmitter. We need to look at getting a receiver for it. The switch we have generates a wireless signal that has to go back to something to then make the actual switch. All we have is the transmitter. I would need to install a receiver into our product in order to make it switch on and off
  8. Vantage Internal dome cctv camera I have 4 of these cameras and 2 linked monitors. The DVR has stopped working It was a dedicated micros eco4 can you recommend a compatible DVR for these cameras and monitoes the connections are BNC twist
  9. Hi, I am looking to purchase some proximity tags / cards that will work with a Pyronix Enforcer alarm (info on the user manual says RINS1548-4 Software 9.13), I am also looking at getting an external reader to go out by the front door. Please could you let me know which products are suitable, not too expensive mind!
  10. Dear Sir or Madam I want advice and information on products that you might have that would suit my needs. I want to automatically switch on my driveway lights when, after dark, a pedestrian or vehicle comes into the gateway or starts up the driveway upon leaving the house, so I will need two sensors. I would like to use break-beam technology rather than PIR so that I can have the beam approximately 75 to 100 centimetres off the ground where it will not be triggered by dogs etc. I expect that when the beam is broken a signal will be sent to switching circuitry inside the house which will turn on the lights. The lights should stay on for about 5 minutes before turning off again. The distance from the gateway to the house is about 42 metres and then it is about another 6 metres inside the house to where the switching circuitry will be installed. There will be eight lights wired in parallel, each fitted with a 9-Watt LED bulb. I would prefer the break-beam sensors to be solar powered and that they should transmit the signal wirelessly. I would like to know if you have appropriate sensors and switching circuitry.
  11. How do you refill this product-FAST 03 2C UR FOG SYSTEM?
  12. I’ve got a customer who wants a zone removing and an extra door contact adding to an existing hardwired system. Is there an converter or interface panel that can sit aside the control box and run a wireless zone? Any advice would be welcome.
  13. I'm looking to replace a Scantronic 9853. Would the Eaton I-On interface with the existing PIR's etc? what the most suitable replacement would be as this panel is not in production now.
  14. I inherited a analogue 8 camera system, that is a couple of years old, and mostly functioning. Id like to upgrade 3 of the cameras, the DVR and all the paired PIRs. Is there a DVR that can manage old and new cameras and the paired PIRs? I'd like to get a alerts from the PIRs, then look at the live camera if needed. To keep false alarms to a minumum I am thinking about GJD or Optex VXS PIRs. Is this a good approach, or should I upgrade to the a POE IP NVR set up?
  15. Scanatronic 8841 & 8844 difference between the two?
  16. I have an Apollo 8ch HD series DVR with what I presume are analogue cameras, using balons with dome cameras and a 12v feed via the same cat6 cable. Will the newer HD dome cameras work with this set up?
  17. I am having a new composite front door fitted with upvc frame. i would like to fit a wired magnetic reed switch to the top edge of the door, so it is hidden when the door is closed. can you recommend which would be suitable to use, the slimmer the better
  18. Yes the Impaq detectors are able to be hard wired to all Texecom alarm panels, along with a Texecom Odyssey Sounder bell box. Yes the Texecom APP will be able to be set up by an approved alarm engineer on the current Texecom Elite control panels.
  19. I'm seen your texecom starter kit - New Texecom Ricochet Kit 2 64 Zone Wireless Kit with Sounder. I want to buy a texecom direct wired bell box. Can I wire that into the control panel for this kit or will it only work with a wireless bell box? Does the Texecom AEB-0001 Impaq Plus Shock Sensor Grade 2 work with the New Texecom Ricochet Kit 2 64 Zone Wireless Kit with Sounder. Also is there an option to have the system txt me when its set off?
  20. I need a replacement control panel for my Securit 800L alarm. Please could you tell me if you have one or suggest a suitable replacement.
  21. A number of years ago I purchased a Honeywell Galaxy 2-20 Wireless starter kit – Part # C020-01-C from you. • Software Version 1.44 • Hardware version 1.00 I’m considering purchasing the following products to give me access to the alarm on my local Ethernet network: • Honeywell Galaxy User Management Suite (Network enabled) - Model: R058-CD-DG • Honeywell Galaxy Ethernet Module - Model: E080-08 Can you confirm that the Ethernet Module and Software are compatible with the Galaxy 2-20 in its current Hardware and Software configuration? If a firmware upgrade is required please give details.
  22. will a Texecom premier elite RKP Model number DBD-0129 Work on a ADE Honeywell Accenta Mini Gen 4 control panel ? As i have 3 lcd RKP at the moment, and i want to up grade them.
  23. I need to buy one of the Texecom Premier Elite alarm panels (plastic case) and wanted to know if they have the latest Firmware v4.02 on them. My current Premier Elite 24 met with a slight accident after a mains power surge and it's destroyed it, so I want to replace it with an identical model. It will be much easier to replace and I have just wallpapered around two remote keypads. If I order Tuesday, is there any way of getting one before Saturday to a CH43 post code? I have dual sounders outside (front and back) and don't want to annoy the neighbours any more, so will have to replace it at the weekend. I'm also looking for something like a power surge adapter for the mains input if you have anything like that. The rest of the equipment I bought from you a few years ago works perfectly, nothing apart from the Texecom panel went wild. All my dual tech detectors, breakglass, keypads etc are fine. I've sent Texecom a few pictures of the panel. It's just one of those things sent to annoy us!
  24. I'm having some problems in getting the CQR SC517 to work with the Premier Elite 48 panel. 5 contacts work as intended and they are setup the way that I cut T1,T2 and the red wires giving the correct restiance towards the Texecom (Double Pole / EOL), in Wintex they work perfectly. 10 contacts do not work, gap is the same between the contact and the magnet 6-10 mm. The do not work, same resistors are cut. In Wintex they report tamper alarm. Any ideeas ?
  25. We recently purchased from you a lock JL2C25R-SS-55 - UNION 2C25 DIN Euro Profile Deadlocking Mortice Nightlatch and a lock barrel EPSDZ36/36 - EVVA EPS DZ Double Euro Cylinder - 72mm 36/36 Can you please recommend a suitable handle for this lock please
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.