Secware

Normally fit ADE Honeywell control panel with LCD remote keypad. New Customer Installation. Customer wants to be able to set alarm with a proximity key. What would you recommend.

The 6 stand-by batteries in the main panel are not being trickle charged. Replacing them with fully charged new ones (1.37V) gets the system working correctly in all respects but only for approx 3 hours. The cells are then down to 1.2V off-load. Have you any information regarding the charging circuit that could allow me to investigate further and possibly repair? Your website indicates that the Homelink 75 is “sold out”. If I need to purchase a replacement system can you please recommend a suitable model Having had further time to think, it would seem logical to assume that the panel’s internal power supply is not producing anything at all - not just the battery charging voltage. Putting new fully charged batteries in runs the system correctly until the batteries run down. Is it possible to obtain a replacement power supply board?

Yes, you can assign different sounders/sirens to different Areas. This can be done with both wired and wireless sounders/sirens.

Hello, Can we assign different sirens (I want 2 sirens) depending on the zones or suites on Texecom Premier elite 44 or more.

Hi, I wonder if you could advise – we are a children’s nursery and we have an issue with parents leaving the front door open. They leave it to swing shut but it doesn’t click securely (when shut properly it has a keypad entry). I would like to put a buzzer on it that goes off when the door is opened and stays on until it is shut again? I’ve looked at the door contact alarms but they all seem to say they have loud alarms. I just want a quiet buzz as a polite reminder rather than an alarm? Do you have any suggestions?

Recommendations for a keypad and fob activated alarm system with 1/2 motion sensors and 2 door switches compatible with the master blaster 127db alarm siren

I want to fit some wired smoke detectors to a Galaxy Dimension pannel. Considering Texecom Exodus 4W or Menvier M12. Would you recommend one over the other? Can you explain the difference between Texecom OH with and without N/O relay?

I would greatly appreciate if you let me know if the above mentioned receiver can convert my existing hardwired Cisco 601 allarm panel sytem. If so, do I need additional devices to make it fully controllable by mobile.

Visonic and they tell me the encryption on all ADT panels are different from there standard power master 10 panels and all sensors must be purchased from ADT.

We need to alarm our allotment warehouse. The insurance does not require an alarm but the committee fell we should spend a little money on a few basics. As a retired control electrician, just , I have been tasked. I require a mega external klaxon internal sounder 4 zone decent control panel 3 good vibration detecters and analyser 1 or 2 dual tech detecters cable Could you put a package together with price

Hi, i recently ordered some extra window/door sensor and an external siren for my Visonic Power Master 10 ADT Branded alarm. I have added a few sensors in the past with no problems but both door switches and the siren will not communicate with my alarm panel. When I add the device and press the auto-acquire button on the new sensor the panel tells me it is not a compatible device. So i tried entering the 7 digit number and now the panel said it is not registered on the network. Thinking it may be my panel at fault i tried to register them on a neighbours panel with the same results please advise?

hope you could advise a product for our requirements. We maintain the electrical installations for a poultry farmer in Devon, he would like to install a CCTV security system. He would like a camera positioned on each of the 6 buildings - looking for a high quality image day and night. From a central monitoring point the sheds are arranged on a radius of 200m (furthest shed - most sheds within 50m), hard wiring the cameras would be impractical. Do you have a wireless system that would be suitable.

customer has a voltek security light system. 1803 controller with 2 sensors and an internal alert. the sensors work, triggering the internal alarm, but there is no output for the 2 floodlights. i have checked the 20mm fuse to the immediate right of the 240V output terminals and it's good.i suspect that the 1803 is faultybut would like a 2nd opinion before buying a replacement.

Can you please advise a suitable alarm system that is wireless but has a wired siren?

I’m currently considering renewing my current wired alarm system (9450) and increasing the zones to at least eight, as offered in the Secware ADE LCD Accenta 3x Optex Saver PIR starter kit. I’ll be exchanging the external bell sounder which this kit appears to accommodate all those requirements, I’d also like to exchange my two battery operated smoke sensors to wired units. What can you suggest or recommend any other?

Hi Trying to programme a FAAC fob to a set of gates to a Bentley Bentayga. I understand that the code changes every time, would the below device work and would it be something that I can install? https://www.securitywarehouse.co.uk/catalog/intruder-alarm-c-36/intruder-alarm-ancillaries-c-36_46/pyronix-standalone-receiver-enforcer-series-twoway-radio-p-4552.html Many thanks.

I have a former ADT monitored alarm and I need to purchase a few more accessories for it. It is a Visonic Powermaster 30. Somebody told me that not all the Powermaster accessories work with the ADT alarms. Is this correct or will the PIRs and contacts you sell work with the system?

Hi, I’m looking to buy a Visonic alarm system. Can you tell me what the difference is between the Visonic PowerMax complete kit and the Visonic PowerMax standard complete kit ? Secondly, I would be installing a gsm unit in the control panel as there is no landline in the house, which unit is best for the PowerMax complete system ?

hi , I have a warehouse building (vehicle workshop) with cars parked at teh entrance needed some advice as to which product you sell that can be used to notify me of human entry into the entrance area with cars parked in the entrance gateway , Also am thinking of installing CCTV , preferably high definition to observethe yard next door. Thank you in advance for yourhelp.

Re: Pyronix Deltabell Plus External Sounder Module Grade 2 Hi I have a dummy rear box. Could I simply connect 12V to this and make it light up my box at night together with the 2 LED flashers?

I'm looking to buy the GSM module for the Visonic PowerMax Complete alarm panel. Can you tell me that i do not need a central service station for this to work? If i need a Central Service Station, is this something i can setup?

Hi, with the Visonic Powermaster 33 if I fit the GSM module what functionality do you have through the app, or do you need to subscribe to the monitoring program to gain the app functionality. Also what type of sim is required, will it work with a G4 network or does it as with other alarms only work with the older G2 networks? Thanks

I am interested in this product https://www.securitywarehouse.co.uk/catalog/intruder-alarm-c-36/wireless-ia-c-36_60/takex-wireless-ready-external-pet-tolerant-12m-pir-dual-head-p-2040.html I want to buy two wired sensors: https://www.securitywarehouse.co.uk/catalog/intruder-alarm-c-36/movement-detectors-c-36_116/all-c-36_116_37/takex-external-12m-pet-tolerant-pir-dual-head-p-2038.html and two wireless sensors (the first link i just sent: https://www.securitywarehouse.co.uk/catalog/intruder-alarm-c-36/wireless-ia-c-36_60/takex-wireless-ready-external-pet-tolerant-12m-pir-dual-head-p-2040.html I want to connect those wireless sensors (as above) to a Paradox EVO 192 central The wireless sensors require an extra module to do this connection with the Paradox alarm?

hi I was just wondering what control panel I would need to buy with the Klaxon 127Db 240v High Output Master Blaster Siren (12v Relay)I will also need 2 P.I.R's. thanks in advance.

hi im looking to buy the ADE Accenta Mini Gen4 Starter Kit with LED Keypad, 2x Quest PIRs and also the Klaxon 127Db 240v High Output Master Blaster Siren (12v Relay) and was just wondering if the klaxon will work of this alarm panel. thanks in advance.