Secware_Tech6

Is there an SNT that you can use for 2 Turbo/HD images if you are upgrading the analogue cameras to HD

Sorry I misunderstood this

upgrading equipment wont help if you have fundamental wiring issues Most 2 wire stuff has a 50m limit depending on cable

This is a windows .Net app as with all software test on your site before using. It works with ours and we use it daily SW-images.zip

We have decided to release this software we use in house. We use a heavily modified Zen Cart system for our platform. We have various tools that we use the hook into this platform and one of them is for the new product team. We use this application to upload images of the products and modify existing products etc. Ive created a quick video of it in action here The app is to ease uploading of images and pdf files. We use it internally. Using it you select your image as high res as possible, then select upload. The app can upload via SMB, FTP or just save to local machine. It saves in the zencart format to allow large, medium and small files and automatically names the images as required and in the correct folder. It also supports multiple images per product with auto upload. Other uses is upload of pdf's. We use this for the product datasheets. Buttons hopefully are obvious. It has been modified to allow others to use it for their zencarts. The browser button is just to allow tests of layout etc on product number. Any feedback or new features changes let us know, im sure if its useful to others it will be useful to us.

My initial concern is that BT cable isnt ideal for Video but OK for audio. Looking at your images it isnt cat5 cable. You me be better with a 2 wire system depending on the ranges involved I assume you have standard parallel audio (ie call is seperate but audio is common. If your having issues on that cable with audio only video and audio is highly probably to be an issue

Hi Eric What system do you have currently and how is is cabled / wired. ie what type and size of cables run where?

Looking to update current system with the Bell BS4 Bellissimo 4 Station Video System

Aspect L-TU-IP4M-Z-1 IP Camera Do you know default password? Will the camera stream in ONVIF mode, what decoding formats?

ADE_Optima_XM.pdf

Hope you get to the bottom of it!

Screening your cables (without the earth connected screened cable is worse than non screened) is certainly your best starting point Ideally change 1 thing ata a time till you track it down. Intermittent faults are a pia to find

Correct Id drop it to like 50ms on all circuits and hopefully iy does it all the time. Then you can trackit down Or put it 800ms (highest alowed under the standards even though the panel will go slower) to see if it 'hides' the problem I would say it isnt an equipment problem id say its interference. rf etc Id be looking for RF noise but i dont know the site etc

they should all be connected to earth at 1 end only. So if you connect them all at the panel end only id suspect that will cure your issue. never connect both ends of a screen. ALso did you adjust the repsonse time of the circuits. The 16+ was an older slower panel so probably didnt notice

Hi, I want to make a quick enquiry with wifi jamming becoming more common would this affect visionic powermax pro kit

No worries How is it wired, ie type of cable used and how is it run, any other cables nearby to those runs. Screened cable is an option the other thing is to connect all spare cores to earth (at panel end only) to help

I was just wondering if the panel is close to current limit. From what your saying i dont think its incompatible sensors. Ive not seen what your experiencing other that with interference on the cables/damage or overloaded psu's If it were sensors being id expect it to happen often.

if you have cable damage or voltage on a single circuit leg it can affect 4 or 8 circuits (usually 4). If its not reproducable its going to be difficult to track down. If its happening very often it will be easier to track. You can also try chnaging your response time (default is 300m/s) but if you make it faster while testing it may help find and make it reproducable. I assume all peripherals are run from the panel psu, and its anywhere near its limit? ie what are your charging voltages and day mode current. Also what sounders, speakers strobes do you have connected to the outputs?

ok so we have a single detector that you can reproduce the error on?

It's the design of the detector however doesn't usually affect eol circuits Prove the cable or swap inputs first to see if it's a damaged expander. Also ensure the power supplies are good batteries charge voltage etc

No I doubt its the Panel if the rios are reporting it. the line should be irrelevant i wouldnt worry about that. id prove the detector line first by just using a resistor. then id confirm the detectors dont have a cap between alarm and tamper lines then if its just one detector type id drill that down

no its not common. Id be doing some tests on the cable etc. Or move the circuit or swap 2 devices over first

id say not an issue. HR is high res reported by the panel assumming your 1k 1k the panel is seeing about 1.3k (ish) thats showing to me a different issue

id be looking at the hr issues on the galaxy first. Its mostl likly to support these You can use common rail 0v on a Galaxy you cant on most panels. Can you post an example of your detectors?

I have been looking on your website for some standalone smoke/heat detectors for use in a boiler house. Could you confirm that the relay output is volt free and can be used to connected to remote PLC digital input card (24VDC). Aritech Photoelectric Smoke Detector with c/o relay output Do you do a range that is more suitable for an industrial installation like a boiler house? It has to be standalone and dual heat and smoke and have the facility to repeat the alarm remotely via a relay output?