Secware_Tech6

But I've never tested it

I believe they won't work.

You could use a voltek system with an ibx

You adjust the circuit settings for both options

I would advice a bell module as I'm not sure if the covers are different

It uses gsm currently so g2

The powermaster doesnt

I'm afraid none of us know what a paradox is?

I don't think its a part that can be purchased on its own

Yes any relay will do what u need

Yes we will.

0.25 will be fine

https://www.securitywarehouse.co.uk/catalog/access-control-c-27/access-control-ancillaries-c-27_43/tkc-12v-dc-relay-handy-little-relay-p-1576.html Or a transistor version

You could do all that with a galaxy dimension and groups

Have you tried presenting the fob during entry on a part set?

I would prove the panel first by removing all cabling and linking all tamper connections including the sab tamper.

https://www.securitywarehouse.co.uk/catalog/intruder-alarm-c-36/door-contacts-switches-c-36_44/knight-g2-surface-contact-with-tact-tamper-and-selectable-res-p-3868.html Is a surface contact that is compatible

They should be marked on the terminals. Also looks like you have a wire disconnected

I'd check the cable on 1 and 2 is ok between the handset and the outer panel. It could be the mic in the handset but id look elsewhere first

I'm sorry i cant see any photos?

The Pyronix uses a slightly different fob. It's the same as the castle fob

If you want hybrid, hard wired and radio then id look at the galaxy rf kit or the hkc 1070. If just hard wired then accenta gen4

If its just basic audible only then i would use an optima compact and say an ag6 sounder?

No. Assuming you are using a gsm module

I have confirmed yes there should be a cable supplied