Access Control

I have just bought an YS 200 UK handset from yourselves to replace an old AS E/200, please could you tell me the connections on the old AS e/200 as i don't have a connection diagram.

Dear sirs, I need to know more details about out put data format of these devices as I need to intigrate these devices with our computer control system Thanks

I have a playcentre which has the Videx ART836M external unit and two internal phones. The ambient noise within the playcentre is loud therefore the external call cannot be heard and we are losing business, as people cannot gain access to the centre. I would like to add two internal sounders (one beside each handset to boost the call signal when the external button is pressed, in addition when we pick up the internal phones the reception to external is poor. Please advise as soon as possible.

I have just obtained a second hand access control system (partly manufactured by Dantech) It has a DA371 PSU and another circuit board for the connection of the card swipe/proximity reader, maglock, emergency access release, normal internal release etc. The problem i have is that i have no wiring instructions to enable me to connect all of my devices to it for my small premises. Can anyone help please. Thanks PJ

Please could you advise if the targha BPT audio intercom with keypad system would work with any electromagnetic lock and exit button device? Also, I am rather ignorant on these systems, is the double electromagnetic systems shown on your website used for double doors? If so, we have a leading gate for pedestrians if the non leading gate is held by a ground bolt will this work? Thanks

We seem to have a Videx VX 800 and the buzzer button seems to get stuck ever so often; can't hear it inside the house; where can I get the access key to check what's wrong.....can only be a loose connection or something......or??? please advise..........any ideas will be very welcome.........thanks

Please can you give me some information regarding the act pro 3000. We have a heath club at the moment all member join online once there join there are give a 6 dig pin number this is all done automatable. At the gym we have a turnstiles with an act 10 key pad link to an act pro 1000 controller with is than attach to a pc. The we now face is the act pro 1000 is no good as we have more than a 1000 members so we can not release no more pins also it has a fault so being repair at the moment. This is what we are looking for so it can be upload automatable to the turnstiles as we have to do it manually Will the act pro 3000 do this if so we will order the act pro 3000 right a…

Hello, my organisation is into information security, audit and control. I am in the process of adding to my services Biometric access control. I have seen the rand of your products and i am interested in becoming a reseller in Nigeria. What is the procedure and your advice. Thanks Philip

Hi i talked to Elaine on friday about getting some extra safty beams for the came 2 frog kit but she has not got bck to me yet any chance of a price i need 3 extra sets! many thanks Gary Read

I have been asked to source a replacement for a damaged BPT video intercom. ONce stripped the circuit board had the serial number VZ 110 and the video camera VT 100. The panel itself looks longer than anything in the present BPT range. Does anyone know of a direct replacement for this panel which is about 12" high. The reason I ask is that it has been mounted in a welded housing and would be a lot of work to retro fit with something else.

Deleted

We are currently looking for a door access control system that manages one door, both entry and exit. It would need to be able to connect to a computer so that staff entry/exit times could be monitored. I have found this on your site: http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=1191&currency=GBP Would this fit our needs as the description on the page is a tad vague. Thanks in advance.

Hi all, I have a Honeywell GD48 intruder panel and want to start using door control access. I think i need a Honeywell C080 DCM so that should be fine and so I am seeking recommendations on an electronic door lock as well as a good quality Wiegand 8bit keypad for external mounting. Background to request: I have a son who 'forgets' to lock the door manually when he goes out so i am wanting to replace the lock with an electronic one which is connected to my Honeywell Dimension GD48 and to force my son to either gain entry by the wiegand keypad or by using his lock key(is there a dual lock solution where either physical key or entry through keypad is possible?). …

I have a requirement to install an access control system on the door to a Gym. I need to be able to open the door from 10am to 4pm but at all other times the card would be required. I have looked at the ACT prox 5 and the paxton compact vandal resistant but cant see how i can open the door for the required times. I plan on using a yale lock and a release and wonder if i need to use an exit button when my members can just open the lock? Am i missing something here? I dont want to spend a fortune but i need something reliable and easy to manage Thanks Geoff

First one is I am replacing an old alarm and want to keep the cables but its it's in 4 core can I wire with outbthe tamper? And if so on the panel do I wire each circuit power directly to the 12v aux on the control panel and the two others go straight in to the zone ie zone 1

Hi, i am looking for a euro cylinder 30mm/40mm to suit my existing keys and euro locks. Is this something you would be able to help with? if so what what i need to send you and aprox how much would this cost for your lowest price cylinder. many thanks, Nick Robinson

hi there, i would like to buy that came fast p automation kit. DOES IT LOCK ITSELF WHEN THE GATES SHUT? HOW LONG WOULD IT TAKE TO ARIVE WHEN I ORDER? WHAT IS THE DISCOUNT COUPON AND WHERE DO I FIND IT? please let me know. regrds kostas

Hi, is the Honeywell 20, (panel only) compatible with the RKPs and Proximity fob pads that I have with my Accenta G4 ?Thanks

This topic has been moved to Intruder Alarms. [iurl]http://www.securitywarehouse.co.uk/forums/index.php?topic=2765.0[/iurl]

This topic has been moved to Intruder Alarms. [iurl]http://www.securitywarehouse.co.uk/forums/index.php?topic=603.0[/iurl]

Hello , having problems with my house alarm and looking for advice on replacement and upgrade. It's a Gardtec 800 series with 5 pirs. So I have been advised to change the keypad and control box as it is 20 plus years old

can you give me the dimensions for the above lock? Is the .9 amp a peak current as il be using the 1 amp elmdene supply? Also is it designed for recessing like normal solenoid locks (ie not a magnetic lock which is bulky) I want to recess it into door frame directly above door centre.

We have a TEXECOM ALARM 816 premier LS1 since 2010version V11 we would like replace the marcher boardIs it possible to ordre it or do we have to replace it by theTEXECOM premier 816 8 to 16 Zones control panelWe need more information

Hi I have a MHF02X unit which seems to have died (power to it seems ok but nothing from the unit itself) before I replace it with a new unit is it worthwhile looking at alternatives or upgrades and can you advise please?