Access Control

I purchased from you 2 intercoms : http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=134 I need one more but with 4 internal handsets.

Videx Stand Alone Proximity Reader

please could you help me with a wiring question. I have puchases a 3021a handset which replaces an old creeam coloured videx vx handset. The old handset had 5 connected points at 1,2,5,6 and 7. Before disconnecting I labelled the wires, removed the handset and re-connected at the same points but I have noticed there is no connection 7 on the 3021a model. The new model has connection points 4,6,2,1,3,5,9,8 but no point 7? So now I have an unconnected wire. Could you please provide some help on this.

could you tell me if you supply a direct replacement for a Videx Handset/Intercom unit. The details on the handset are as follows, ART 942 HW VER 2.1 S.N.B3140392

I am looking to buy a security keypad for the college I work at, we are wanting one where you have a digital code it is to go onto a filling room door to keep out other staff and students. Any ideas into which one we could buy, would like it to be as cheap as possible

http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&cPath=27_29&products_id=1335 can it programeres with 2 different code, I thinks one code that can lock the dore, and another code to both dore and whole Alarm on / off

We, at the Swindon *********** *** have a 2000 Series access system, for our 1200 members, unfortunately the Card reader on the above appears to have broken down, with no 12v power supply to lock release. Can you please advise if a replacement part is available. The current unit operates by cards produced by EBF Card Systems

I am going to install a pedestrian gate at the front of my house to improve security. Can you please advise the best and most cost effective solution. I would like the following, either wired or wireless, specifications:- - weather proof lock - either maglock or electric strike - audio intercom and door bell with push button lock release from inside the house - hands-free proximity sensors for access from outside

does this product come with the frame pictured? If not how much is the frame?

Do you stock the 9135110E and 9135331E 1 button intercom and rain cover from 2N? If so, how much are they?!

I recently purchased one of these door entry phones to replace an existing one which is a Videx one but slightly different so I need to know if this model will work and how to install it?

A customer of ours has purchased a Videx 837-1 unit recently following the failure of the microphone in the Videx gate unit which turned out to be an 836-1. Is it possible to use this 837-1 unit as a replacement for the 836-1 or can you supply an 836-1, or compatible, unit.

I need the Act 5 and 10 Fobs, it is not clear on your site whether the fobs http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&cPath=32&products_id=131 are compatible or whether you have a package that would include them.

Can you give me the connections for a Videx ART3351 so that I can connect an extension speaker (512A already purchased from yourselves)so that it operates when the call button is pressed. Thanking you in anticipation

Iam looking for a intercom system with 5 handsets with buzzer.when buzzer is pressed we like all sets to ring.Also we like to tie in a gate intercom.

I would like to purchase a new audio door entry handset as my existing one is not working correctly. I would be grateful if you could identify the model of my existing handset in order to confirm compatibility with the ones you have for sale on your website. I live in a flat and the handset is connected to a communal door entry system (can also supply a picture of this if required). Here is a link to photos of my handset (inside/outside): http://s1095.photobucket.com/albums/i468/h8lly/Handset/ The make is Terraneo and there are some serial numbers on the inside: 1600522 and 1600525.

Is it possible to add extra hand sets to a BPT E/200 system please If so pat no.s as well please many Thanks

I have been asked to purchase and install the BPT Targha entry system, having not fitted one before does the Mag Lock need to be a Monitored or Un-monitored type. I am looking to place the order asap and would appreciate your help with the type I require.

We have been asked to fit a audio only door entry system to a school where the gate is at the other end of the building from reception where the handset will be, approximately 100m away (no line of sight). They have a network phone system which is being upgraded from analogue to digital shortly. Is there a system that could connect to their phone system? Or can you advise on the range of the wireless systems?

Would like info on how to change access code on a videx 1 button+coded access

have ordered a couple of your Secware External 500lb Magnetic Lock Can you please advise me of the dimentions of these magnets. most of all i need to know the width of it so i can make preperations before they arrive.

looking for a list of GSM dialers for a door entry system. we have a 20 room sub let office building that is difficult to retro fit. the land lord now requires a door entry system. do you offer a GSM to landline call from a PAYG sim card system?

I need to replace a videx front station, that appears to be the one button audio + code lock, and need to expand the system to a 2nd entrance, I saw a 2 door controlleer on your site, but that said it was for prox tags.. can you advise what component parts I require.. I assume the controller has clean contact relays for use with maglocks and aux PSU..

We have a bpt system for our front door with a camera and a phone. We were wondering if you would be able to provide a wireless phone so that we are not deskbound but could move around in the office and still open the front door. The phone we have is YC/200 UK if that makes sense.

We have a Videx 3312 Videophone Monitor can we use a VIDEX 901 Door Entry Monitor Intercom / Videophone GWO instead, does it have the same plug in capability or would there be re-wiring involved