Intruder Alarms

Hi, I have a texecom PIR which has a normally closed relay, unfortunately I have a voice off device which plays MP3s when triggered. This requires a Normally Open input which closes to trigger the MP3. Is there an off the shelf device which would convert this PIR from Normally Closed to Normally Open input? Many Thanks

I am almost there.. a few questions left. I am looking for a down to earth intruder alarm system for my house. My electrician will fit it. I think this ADE accenta will do. I am looking for a small external sounder. Is the Eurosec XS3D a good option? I would like to order the one with the orange bottom, so which items do I have to order? As I want to add a speech dialler in the future is it right that the only one ADE panel which supports this function is the ADE accenta metal Gen4? Or does the other models this as well? Which battery should go with this metal ADE accenta? My electrician wired 4 core wires to the PIRs. Is that OK for standard PIRs? If so wh…

Hi can anyone help me, I have installed this alarm system myself and i can set it fully,however I cant part set it. I have gone through the programs ,program 1 does everything,program 2 i have set up to just do downstairs. I have gone through the manual and done as it says, but when i set the alarm it says that once the code is typed in and the countdown begins press 'P' and the tone will stop then press the program you wish ie. 2. But for me the countdown doesnt stop, I press 'P' and 2 and it does nothing and it still says program '1' on the LCD keypad. Please help before I use a hammer on it as it is very frustrating!!!!! Please help thanks

Have Securitech 700L control panel which needs replacing. Will Honeywell Accenta MiniGen 4 be suitable and retain existing wiring and PIRs?

I would like to get the equivalent speech dialler but a digital one, Can you advise which speech dialler would be best?

I am replacing an old system which is armed on exit using a shunt lock, I require a similar wired system. As we have a number of keyholders we prefer the final lock to arm / disarm the system in preference to a keycode

Hi, hopefully you can help me my Eurosec cp8l has stopped working after several years. I need to get a replacement if possible I would appreciate it if you have any suggestions for me to swop over to a new alarm thanks.

I have purchased these intems against your order number 22312. I am having problems setting up the receiver to recognise the transmitter. I have teh items to hand, connected and ready to program, The transmitter is set/connected as a mode 6.with the door switch supplied. The receiver however doe's not recognise the the transmitter. Currently it hase the yellow supervision light on with the two red zone lights flashing. Can you please advise a solution, or better still, can we arrange a time when someone can talk me through the set-up? Thanks for help and best regards,

Brown recessed 24V door contact to switch a contactor for an oven off in the event of door closure

Hi, we have constructer a community hall with aluminium windows and doors. Do you have a door and window sensor which can be wired into the building security alarm or wireless which can be concealed in the frame? The Client does not like surface mounted door alarm sensors.

Is it necessary to solder in-line resistors to all the zone inputs i.e. E/E, PIR and door contacts? With my old Scantronic 9200 I just connected the contacts straight across the inputs on the PCB. The scematic shows a resistor on the e/e input. Thanks

Please can you tell me if you are able to supply a plug-by communicator for a Scantronic 9651.

Hi, i had a Powermaster-10 kit installed about a year ago. Recently the ability arm via a SMS message (arm xxxx) has stopped working. Using SMS to ask the alarms status (status xxxx) works and when use the communications test option via the control pannel i get the Auto test SMS message sent to my phone. I've tried differnet pass codes for differnet users etc. Plenty of credit on the sim card. So all seems to be working except the ability to arm? Any thoughts or suggestions on what else to try/check. Thanks Ewan

I'm looking to replace a Scantronic 9853. Would the Eaton I-On interface with the existing PIR's etc? what the most suitable replacement would be as this panel is not in production now.

The Scantronic alarm is situated in the hallway and the past couple of days an alarm keeps going off. It seems to happen when we close the door leading into the hallway or sometimes we do nothing to set it off. The error on the log says "Z01 TAMPER", so there is tampering in zone 1 but the installer didnt inform us on the zones in the house or even how many zones there are in the house. I would be tempted to omit the Zone 1 from the system, but I would be worried as I am guessing it is the zone that encompasses the front door/hallway. Any help would be much appreciated. Thanks.

https://www.securitywarehouse.co.uk/catalog/intruder-alarm-equipment-c-36/intruder-alarm-ancillaries-c-36_46/secware-ps7-adegen4-prox-tag-pack-5-p-5862.html Hello , I have the ade simple set unit, with the older fobs, which I can see are obsolete now. Your alternative link takes me to these items. Can I check that they work directly, or do I need to change the simple set proximity unit ?

Hello Questions about your kit refered: Visonic-Quick2Fit -Does the panel include the battery (should not, which reference to order). -Same question for the external siren -I can't find any reference for PIR detector from VISIONIC in your catalogue, so don't know which one from your catalogue could be compatible with the panel. Could you please advise (for pet tolerant only). Thanks

You have 2 items listed on your web site from Texecom. TEX-CGC-0001 which is listed as a Speech and Text Dialler at

Please could you give me some advice on a wired alarm system to replace the aging Scantronic 808 system fitted to our house. I am a chartered electrical engineer, used to complex programmable industrial control equipment so will self install. The basic spec is:- 5 off existing PIR

I have a 15 year old Eurosec system that I whish to refurbish/upgrade. A few questions: I have what looks like the CP8L remote pad - is there an better option to replace? Tag compatible? Would you advise replacing the main panel at 15yrs old? I wish to add another remote keypad (garage entrance) and a contact/PIR - best option (remote tag?) Can you recommend replacement PIRs? Is there such a thing as wireless door contact?

Hi, I have installed my first wireless le sucre PIR on my flex system. Everything went ok with pairing until next morning I get keypad message rf batlow. Result: I am on my 3rd battery in 3 days!! So I have changed old PIR removed serial and paired new PIR with the panel and I can see the new serial No. in th RF intruder zone (signal strength is good menu 21). When I do a walk test I get no result from the RF zone. If I activate tamper the panel registers it. When I walk pass the sensor I get 2 long flashes then when I move after that I just get 2 short flashes. I thougth that wireless PIRs do not flash after warm up unless the alarm is set? The PIR does this wethe…

Hi. Does anybody know what the bell/strobe output is on this unit. I am changing a Scantronic 9200 control panel and don't want to have to buy a new bell unit. A link to a installation wiring diagram would be good! Thanks

Hi, Could you please confirm if the following batteries are suitable for the Optima Compact Gen4 and if they will fit into the enclosure ok? They are both made by Yuasa but one is cheaper, so what's the difference and which is the better one? http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=350 or this: http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=1339 Also, could you please confirm if you have both the Optima compact in stock and either of the above two batteries? Finally, if I order today, when can I expect delivery? Thank you

Hi, I installed risco cpx with novaguard 2 years ago, would anyone know what onboard battery (nimh I dthink)oes novaguard 6 comes with?is it 6v or 8.4 volts?my cpx panel is asking me this. The reason I am asking is because in logs I get Nov 1 chg(ma) Hi and Nov 1 on-chg Hi even though all the parameters are correct,not sure if this could be to do with me not setting the correct battery volts. the error in logs have been there since day 1 but last last I had a false alarm and in log it said " external bell tamper" and I want to just rule the volt setting out. Thanks

Looking for a shock sensor. I have an isolated gantry with access stairway. Trying to identify if there is a shock sensor / virbration sensor that can be placed on the metal structure that will send alarm when detection noted. Do you have a device that will perform in this manner