Intruder Alarms

hi i had a scantronic 9448+ style installed a number of years ago which has worked perfectly, but since the main fuse was knocked, the mains light on the panel does not illuminate and the panel does not power up. However, there is now a couple of lights on behind the keypad, which had all gone off after the main fuse was knocked out. Also, after the main fuse was knocked out there was a few weak noises from the panel...these have since stopped. Even trying to key in our code, there is no audible sound or any changes to the state of lifelessness. Can you advise us on how to remedy this problem, or suggest a 'like for like' replacement? Yours smash0007

I have a client who has an existing alarm system with a eurosec keypad, PR5208 rev 1.0. The keys 2 & 5 have given up working, so we need to replace just the keypad. Is the "Risco Gardtec Eurosec LCD Keypad" product that you sell the right one, or do i need the other one you sell that is for CPX and GTag? Also the original company to fit the system are no longer around, would you have a copy of the installer manual with the default master/installer code as i quite expect that taking the old pad off the wall will set off the system and as the buttons dont work i'll need to reset it all.

Do you have any motion sensors with two contact sets ? So that it is possible to use one contact for alarm, and one for home automation ?

I would greatly appreciate if you let me know if the above mentioned receiver can convert my existing hardwired Cisco 601 allarm panel sytem. If so, do I need additional devices to make it fully controllable by mobile.

can the texecom veritas panel have a remote keypad fitted to it?

Hello, Is it possible to purchase ceiling brackets for this PIR from Security Warehouse? The bracket required is the EB1 (Pyronix part FP01210). I can't seem to find anywhere to purchase these as a seperate item. Thanks John

Hello Can securitywarehouse stock any ESP acousta's? Im after one with a blue lens. I have found one for

hi... should be recieving my alarm from you trammorow and want to take a go at installing it my self.... but looking at the wires my sons layed 8 core instead of six :-\... and than for the internal speaker they did not feed the wire to the control panel instead the fed it to the keypad :-\. what can i do can i use the 8 core wire? and what about the internal speaker... and plus they layed the 8core for everything which is the bell box... PIR,s . Thanks guys by the way the alarm i purchased is ADE Honeywell Accenta Mini Gen4 with LCD Keypad hope that helps thanks!

can you suggest a good quility wired alarm system for 5x pir, 2x remote key pads, or 5 x pir, 1 x remote key pad, and a key fob which could be up graded for a dialler as well .

Deleted

Hi , I'm after a bit of help , I'm looking at installing an external sounder to a powermax complete panel in out house , the eves at the top of the house so don't want to be going up ladder to often to change batteries etc . I've looked on your web page and it directs me to an expander module to allow the connection up to the siren, however looking in the panel I can see some connection for 12v , internal and external sounder already on the main panel next to the connection for the telephone line , therefore can I just use those to feed the external siren, thanks for your help with this .

I'm just inquiring about your Klaxon h series burglar alarm sounded, just wanted to know is it compatible with a Honeywell accenta control panel and also is the sounder the same as shown its the picture?

Hi, Im looking for a long range (reliable over 30m) outdoor motion detector to control outdoor lighting. It needs to be able to be triggered by a person or car but not trees and shrubs. I got a cheap one which picks up shrubs so my outdoor lights are constantly on and off! Thanks

Hi. Do you know if there is a known bug in Galaxy G2 20 alarm such that after an AC Fail it can only be reset by Engineer. Mine offers Manager Rest Required but this does not work and I have to use the Engineer login. Checked the forum but could not find any relevant info. Thanks in advance.

Any ideas where i can get hold of a menvier ts690r. i have a customer that has one that's gone faulty and would like it replaced with the same. The panel is no longer made so I'm on the hunt for someone that has a spare cheers

I want to use 12volt bells as my warning devices but I've been told that they will burn out the microprocessors on modern control panels. Is this just a way for the trade installer to put me off doing it myself or is there any truth in what he's saying.

Hi I need a full system. The main building requires 9 zones and there is an outbuilding within 15 yards of the main building which has mains power and requires 2 zones. I believe that for the outbuilding I need a wireless expander as I do not want to fit wireless sensors. The main building is suitable for a wired setup. I would appreciate some guidance on a suitable, cost effective control panel and accessories.

was hoping you sold the Visonic K9-85 pet immune PIR's but noticed the Scantronic CS430's that look almost identical on your listings (same can be said of Visonic K980 and Scantronic CS440). Can't remember if Cooper are now the same as Visonic but my question is, are they the same? Thanking you in advance,

I live in UK , but have a holiday home in Spain ,and need an intruder alarm ( that doesnt need a landline ) to notify me of a trigger to my mobile phone .I dont really have any permanently resident and reliable close neighbours to act as a keyholder or lookout . A sound bell/siren would not be of help or long term deterant . Need ideas of a suitable system , and outline costs .

Hi I have a securilite alarm system fitted with the IBX Command centre in the house which has Single head PIR sensor outside to cover the drive way, the sensor has failed and i cannot see any part numbers on the sensor and i am unsure which one to order from you, it looks identical to the voltek sensors you list but which one ? would the Voltek 1804 single head sensor be suitable for this with the range of 18m x 90 degree angle ? Kind regards

Recommendations for a keypad and fob activated alarm system with 1/2 motion sensors and 2 door switches compatible with the master blaster 127db alarm siren

Hello, I have a Blue Line Gen 2 (ISC-BPQ2-W12) Bosch PIR. Can you advise if this is suitable as a replacement for a detection systems DC950-A pir connected to an Ademco Microtech Galaxy 60 C052 alarm panel

(Apologies to those who have seen this post already. I realised that I had posed it on the wrong board.) Hi, I'm looking to purchase an alarm system. Currently my short list of panels are:- Texecom VERITAS EXCEL ADE Accenta Mini Gen4 Scantronic 9651 I was hedging on towards the 9651 until I read about a 'engineer code guard feature' that doesn't seem to work. Here is the link where I stumbled across this issue. Sorry it's a bit long, but towards the end of the page they say that it is a software problem although not openly admitted by the manufacturer. http://www.thesecurityinstaller.co.uk/community/lofiversion/index.php?t24279-0.html I suppose on…

Hi I need to check a couple of things... 1. If I order the "Castle Care-Tech Euro One (includes LCD keypad)" from your site - part number EUR-1024... it says you get the panel and the remote keypad - is the keypad fitted with the Prox sensor for proximity fobs? 2. If it is how many fobs come with the panel? 3. We have never fitted this panel and have tried to get the engineer/installation manual from the Castle Care Tech website and it is password protected... we have registered with them but heard nothing yet - does the panel ship with installation/setup details? 4. do you have to use the Castle Care-Tech proximity fobs, or can you programme the cheaper ADE Ho…

Hi all Looking to purchase a wireless alarm for my house. 5pir's, 1 contact, panel. Would like to use existing wired bell box if possible. A good battery life would also be nice. Been looking at the infinite prime alarm, and the visonic powermax kit. The Scantronic 500r also looks ok Only problem is that the powermax plugs in with a plug in transformer, wouldn'y that be easy to defeat by a burglar? Any advice would be great Thanks Josh