Intruder Alarms

I need to buy the Visonic Powermaster kit 10. In addition I would like to have two proximity tags. Can I get them and, if yes are they compatible with the kit?

Hi, I am interested in the Visonic PowerMaster 33 but see that the panel itself only comes in a kit. I would like to add some items to the kit (additional chicklets, PIRs and a GSM-350) but also remove some items (door contact and per friendly PIRs). It is possible to modify the contents of the PowerMaster 33 kit so I do not have to purchase items I will not use ? Also is the SR-740 included in the kit the rectangular or hexagonal one ? Thanks,

I have a euro mimi house alarm system. Following a recent power cut the alarm will not accept my code. What do I need to input to reset the alarm system please

Is CQR cable worth the extra over ordinary alarm cable?

Hi, I have ordered the Honeywell Accenta Mini G4 contorl panel with LCD remote keypad and is still waiting for the delivery. But my electrian has asked a question where should the control panel is located. He suggests to put it inside the cupboard next to the MCB board. However, I am thinking where is the internal bell? If it is inside the control panel, so I won't be able to hear the bell as the control panel is inside a cupboard and the door is shutted. However if the bell of the system is in the LCD keypad, there won't be any problem as it is located next to the entrance light switch. Qs: Is the internal bell inside the control panel? Qs: keypad descriptions in…

Bought myself a Jablotron JA-83 panel. The manual advises to connect only 1 wired keypad (JA-81E). Additinional keypads should be connected wireless. Does anyone have an idea why ? Is this panel not able to work with 2 keypads on the same keypad connectors? Does the panel delivers not enough power to feed more than 1 keypad? Or does Jablotron likes to sell wireless keypads above wired ? I really would like to know why...

You sold the above to my installer when I renovated my property in 2012. I have never actually used it but now looking to start using it. The engineer at the time left me an engineers code which i cannot find nor can I remember the code I used. Is there anyway I can now get the alarm working? Your advice would be greatly appreciated or any contact at Scantronic. Many thanks ps a contacted another firm told me I would have to buy a new panel through him which I find hard to believe.

I have a Honeywell ADE Optima Compact Gen4 intruder alarm system and want to add a wired door contact. Will you advise me what to use please.

Hi, Can anyone help. I have an Pyronix Enforcer alarm, all I want to do is edit Zone B. It currently sets downstairs in house and garage, I just want to edit it to set garage only, but can't find anything in the manual to help me do this, any help much appreciated, regards

I would like to install either a Honeywell Galaxy 2-20 or 2-44. The house is very large with detached garages 10m away. Because the majority of the house floors can not be lifted and the decoration disturbed a wireless system must be fitted. This does not seem to be a problem for the Galaxy G2. Initial assessment suggest that in excess of 40 wireless detectors are required (dual-tec, door contacts, smoke alarms etc). As far as I can tell from the Honeywell specs there is no limit to the number of wireless detectors that can be added to the system, is this correct? Without doing a detailed RF site survey I anticipate that 2 RF portals will be required, the …

Can you get a larger ampage model? Is there any advantage in getting a larger ampage model, I am wanting to run 4 sets of Takex 100m Ext/200m Int Intelligent 4 Channel Quad Beams through it. Can you recommend what batteries I should use?

Hi, Just wondered if you could tell me please how to change the volume on the 16 ohm speaker? I have one but can’t figure it out. Are they just one volume or is it changed at the panel? There is no adjustment at the keypad. https://www.securitywarehouse.co.uk/catalog/intruder-alarm-c-36/sounders-c-36_45/internal-sounders-c-36_45_139/secware-16-ohm-internal-speaker-tampered-grade-3-p-5040.html

Hello, I would be grateful if you could help me in any way with my problem as outlined as follows. My son has recently moved into a house with an existing burgular alarm. Unfortunately, the alarm control box doesn't have any manufacturers name or address. The only markings on the front of the box is what appears to be "9448". The original owners didn't leave any details regarding the alarm and we are unable to contact them. After speaking to a number of alarm installers, it seems that the alarm might be manufactured by scantronic. In the hope that this is correct I wanted to try to obtain a user manual so that we could find out how to reset the memory to factory setti…

Hi I would like to add a couple of remote keyfobs (KTC805) to my existing Dominial installation. Is this the same process as adding a new user / proximity tag or is there a different process? Do installation instructions come with the keyfobs? Thanks Mark

i would like to know if Texecom PSD001 SPEECH + TEXT DIALLER is compliant with the French netwrok?

hi I have an accenta G4 which I purchased from you a while ago I never completed the installation due to illness, but now after a break in I decided to complete the installation. I have got to the point of setting up program but I get tamper fault lockout, I have checked all cabling and have even put link wires on all tamper circuits even the one on the lcd keypad. but I still get the same message. I have also made sure the panel spring is pressed, I have done a complete factory restore but still the same. do you have any ideas for me to try ? I am happy to replace the panel if it's faulty but I don't wish to waste money if it is something else. thanks in advance

My system is now indicating \"trouble\"...\"AC failure...fuse failure\" The ac is connected and the supply is good. the manual says the powermax has 2 internal fuses that automatically reset. But still the trouble message is there. I am assuming its now running on the battery and will be dead within the next day. please help.

Hi all, wondering if anyone can help please: I have a wired home alarm system using the Honeywell G2-12 panel. This was an existing wired system and I replaced an old domestic failed panel with a G2-12 panel and MK7 keypad with Keyprox. I now have a programmed up and working inruder alarm system that can be set and unset with users and PIN entry on keypad. I need to have a Prox Tag programmed in so that the system can be unset from Night Set to keep it simple for the wife to unset the alarm without her glasses first thing in the morning as she is normally first to come down - she is long sighted so only needs glasses for reading which she forgets to bring upstairs…

I'm currently self-building a house and am trying to decide on the alarm system (wired v wireless primarily) We have a pet (uses ground floor only) so PIR may be an issue. There are 3 doors (entrance, back and bi-fold) and 9 ground floor windows, plus 2 upstairs by a flat roof. I think I'd prefer wireless if possible, but I have a detached garage with games room above (1.5m from house). I also like the Texecom flush control panel - can you connect 2 of these? Can you recommend a system please?

Looking at Eaton 703R with Receiver and way to alert when received

Hi, I have a house and a detached garage, both currently covered by completely separate wired systems. There are separate Bell Boxes, one on the front of the house and one on the garage. As the house system has become faulty, I am about to replace both systems with 1 Homelink 55. I want to continue to have SABs on both buildings (with the flashing LEDs to prove that they're real). I could just power the unit on the garage (no wires other than power connect from house to garage) and hardwire it so that its just decorative, but wanted to have it operational. I've been looking at the information available and am confused. Can I achieve what I want, i.e. remotely tri…

I am currently designing system for my home.System will include fire detection. I require help with some of the system before placing order. 1. The panel I have selected is the Menvier TS590 which you sell complete with keypad. I would like to use prox tags with this system. Can you advise if the keypad will take the TSNET proxtr1 reader plugin? 2. Can you advise if you have in your reange carbon monoxide gas detectors which can be used with the alarm panel. I know that cooper produce one fopr their wireless system? 3. Do you have within your PIR detector range a 360 degree detector which is pet friendly? I could not find one when searching. 4. can you adv…

i'm sorry but yesterday i received your ex-35r optex detectors and, comparing with mine, i discovered that inside my detector there is one more transmitter, probably compatible with my General Electric "Simon" alarm. here you can see the manual (in italian) of my "Simon": http://www.hesa.com/index.php?page=shop.getfile&file_id=658&product_id=515&option=com_virtuemart&Itemid=37 in this manual it is written that Simon works with any "autolearning" detector SX ITI at 433Mhz. if you want, i would like to send you a picture to show the transmitter that is inside, and if you have it i can purchase, or if you have detectors compatible with my alarm system …

can these Honeywell Intellisense DT 7450 pir be used in conservatories or can you reconmend one. I am working on an alarm that has a pir in the conservatory but it keeps going off.

Currently speech dialler used to inform of movement from CCTV through text. View CCTV from iphone and would like to communicate via loud speaker to intruder. What products do you suggest, and how to connect.