Intruder Alarms

Hi, I've never actually used one of these systems before but I've got a work colleague that's recently purchased one from yourself s. three quick questions 1. Is there a cheaper alternative third party keyfob that is compatible with this system that will talk with it, I'm guessing it's probably the same as a Honeywell galaxy g2-20, or visonic powermax where you have to use the manufacture branded keyfobs? 2. If they purchased the WIFI module I understand there's apps available to monitor and control the system remotely but could they also use the apps available for there phone so it works in the same way the keyfobs do?, would this include a simple set/unset …

hi brought honeywell informa a while ago along with accenta g4 package. the problem is i can get the infroma to ring out in engineers mode but when the alarm is activated (set off) to see if it rings out it doesn't. the only time it works is when there is no power to the alarm mains or battery. i have connected the dialer to it dedicated connection and also to the +/- and the bell - but either way it still doesn't work. any ideas.

can anyone provide list of kit for easy install and use of intruder alarm kit using tel communicator eg Informa speech dialler, key fob set/unset,can these things be used with control panel with onboard keypad if so which one and are they also compatible with each other.thanks jw

Hi, I have a new Veritas R8 Panel (with remote keypad) and wish to connect to a Gardtec Eurosec XS3D Bell Box, Purchased from you. Could you please advise of the correct connections from panel to Bell box. The connections are as below Panel SX3D bell box S ST- D TMPR C S- B 12V A 0V Cheers..

Having received my domonial kit it had no instructions with the panel. I've spoken to Honeywell and they have emailed a copy but it seems to suggest that I need some programming software to program this panel... There isn't any with my pack. Can someone please tell me what's going on?

hi i have a veritas R8 alarm and require a replacement battery could you contact me with the spec that i require as i would like to have the battery prior to opening the controll unit. many thanks.

Can you tell me if I can use Texecom equipment to send a CONTACT ID signal using a SIM card The monitroing company says I must use CONTACT ID to send a digital signal over a voice call

Hi, We are a school with a primary, secondary & sixth form buildings, each with their own intruder alarm panel and we are looking for a fob which can be programmed to all 3 panels. I believe our panels are Honeywell Galaxy. Do you sell an alarm fob which can be programmed to multiple panels? I look forward to hearing from you.

I wish to purchase an alarm system. I want high security, minimum false alarms and ease of installation. Ive been looking at Freewave, Risco and Visionic wireless systems. Downsatirs I have 3 living rooms and Kitchen each with a door which opens into a large hall (5 PIR ?). Front and back outer doors (2 Mag) I want telephone notification of myself or neighbour and an exteral and an internal sounder. Please recommend a suitable system Thank You A Adams

I am looking at purchasing a home alarm system for my house. My friends here in Sweden recommend the Visonic line. I am looking at a package to include the following: PowerMaster-33 G2 or PowerMaster-10 G2, could you please help me with what the pros and cons would be between these two? 1 x Internal GSM-modul GSM-350V21 2 x Wireless cameras (NEXT CAM PG2) 3 x Wireless magnets (MC-302 PG2) 2 x Wireless smoke detectors (SMD-426 PG2) Touch-panel + 3 tags either KPA-160 N PG2 or KP-250 PG2, could you please help me with what the pros and cons would be between these two? 1 x remote control Might also be interested in one or two outdoor cameras or motion detectors with lights

Hello can anyone help,on entering the building after the alarm has been set there is no exit entry timers sounding ,and the externel bell box triggers,zone 2 which is in the path to the rkp is set as access.

My system is now indicating \"trouble\"...\"AC failure...fuse failure\" The ac is connected and the supply is good. the manual says the powermax has 2 internal fuses that automatically reset. But still the trouble message is there. I am assuming its now running on the battery and will be dead within the next day. please help.

I want to use the PGM output to connect another device (trigger an event). The requirement for this is that the PGM has a binary digital output (On/Off). Does it? And how do I use this?

Hi, I'm looking to install an alarm system for a steel shed with no windows. Alarms are all very new to me so I'd appreciate some advice. What I want to achieve is: - An audible alarm activated when the door is opened. - A system that runs on mains power, but which has a battery backup of at least 2 weeks. - Preferably some way of disabling the alarm before entering the shed, avoiding the need to have a period to allow for a code/key to be used to disable the alarrm once the door is open. - Surface contact sensors on the door. Is this achievable, or am I looking for something that doesn't exist? I'm open to other suggestions if anyone has any. All advice gr…

Does this Smoke sensor (Menvier M12) come complete ie with the back plate? thank you

I was thinking of getting a wireless alarm like powermax with a GSM backup (think it is a good feature to get events sent by sms when kids come home from school and so on). Main reason to have a wireless is that it is easy to install. I have a house with 5 rooms on the groundfloor. There are 11 windows and 4 doors. The thing is that I have a dog and a cat. Weight of the dog is 33kg. So the questions are. 1. Are the pet IR detectors reliable? They say up to 38 kg so is should be ok, but want to avoid false alarms. 2. If I want protect all windows, what would be the best method. Switches and vibrations sensors on all? It will be rather expensive... 3. I've r…

support/Elaine, is the 2.1Ah rechargeable battery included with 9448EUR-95 STYLE? thanks

I have just completed an instalation of a accenta G4 from yourselves,on powering up i can reset the alarm by entering factory user code but the display on the 2 LCD keypads is all black squares,please can you advise any help checked wiring but all seems correct with panel and both keypads.

Need Help, i installed my alarm system all fully working, went to add a new infa red, now they all have stopped working, i have reset it loads of times, i have evn tried just riging1 infa red but still they wont come on. Any Ideas? Thank you Daniel

I want to place an order. We would like to change our G2-44+ for a GD 48. First i want to ask, can we move the settings from the G2-44 to GD 48 or do we need to set all settings when install? Can we buy a RS232-wiring and do it from a computer or do we need to purchase a sw to do it? Or is it free from honeywell? If not free, can we program all from the MK7?

Hi! Bought a Visonic Powermax+ alarm from you and have run into some problems regarding master installer code and installer code. The problems shows on both the central unit and the keypad unit. When I installed the alarm, I (of course) changed the default codes to my own. However, as far as I can remember I only changed 2 codes where off one being the user code and the other one either the master installer or the installer code. Now I can't seem to access the alarm using the other alternative of installer codes. I would be glad if you could give me some hints to where I've gone wrong. The setting and fault behavior right now are as follows: 1. When first changi…

I am looking for some alarm PIR sensors that will operate on a 24v DC supply for use on a double-decker bus that is being converted to a Men’s Shed workshop. The standard bus supply is 24v and the alarm contacts would need to be either N/O or N/C as the alarm control panel does not use EOL resistors. Please could you suggest some suitable devices.

Hi, I have a house and a detached garage, both currently covered by completely separate wired systems. There are separate Bell Boxes, one on the front of the house and one on the garage. As the house system has become faulty, I am about to replace both systems with 1 Homelink 55. I want to continue to have SABs on both buildings (with the flashing LEDs to prove that they're real). I could just power the unit on the garage (no wires other than power connect from house to garage) and hardwire it so that its just decorative, but wanted to have it operational. I've been looking at the information available and am confused. Can I achieve what I want, i.e. remotely tri…

Hi, I'm going to replace my existing (faulty) Eurosec CPX alarm and I'm intending on purchasing the Texecom Premier Elite 24-W Kit from you: 1 x Premier Elite 24-W Complete Kit (GED-0013) 5 x Premier Elite Ricochet Impaq (GBB-0001) additional sensors for the windows (impact) and door (using the included magnetic contact) 1 x Premier Com2400 (CEC-0001) for communications I have a few questions though: Will the com2400 fit inside the control box supplied with the above kit? Which backup battery should I purchase for the control panel? Can I use my existing external sounder or should it be replaced with a new Texecom Odyssey Sounder (either wireless Ricochet…

Hi all, Hi, I hope you can help, I have the optima compact gen4 and I would like to change the entry time but cant find the codes from engineers mode. Can you tell me how to change it or point me in the right direction to find it. Thank you Jiroma