CCTV

Please register for a login for the Forum at http://www.securitywarehouse.co.uk/forums/index.php?action=register You will then have access to post questions. To post a new question, navigate to the area you wish to post your question and select the 'new topic' button towards the top right of the screen. Give the post a relvant title and enter your question / comment in the main area and press 'Post' Any questions then just email us at technical@securitywarehouse.co.uk

I am after help in resetting password on this system as i dont remember the password when installed. And just some set up help please.

Hi, for the NV-214A-M device, do I need a device at each end of the twisted pair, so that the video feed from a remote camera can be fed into the BNC connector on a Samsung SRD873A ?

I previously sent this by email but received an automated response saying to post on this forum. I ordered a Panasonic BLC20 network camera from you on 12 June 2008. It was working fine until recently when it has become unresponsive. The network setup program does not detect the existence of the camera when it is set to wired mode and connected either directly into the computer or into the router. The factory reset button does not seem to have any affect. The routers Ethernet socket lights up when the camera is connected and set to wired and I've tried using a different cable. I've also tried entering the MAC address directly into the setup program and disabling all …

we have a eneo ptz keyboard KBD-2 and the ptz cameras one minute it is over reponsive and the camera just keeps going round with no control to stop apart from gentle touches on the joystick to try to get it to stop rotation and other times camera rotates very slowly then to stop have to hold joystick in one direction to stop this then goes out of control could this problem be with the KBD-2 or the PDU-1 unit that the keyboard is connected to this is the first time i've seen this kind of unit in all the years i've done cctv. any help would be appricated very much as to what the cause of this problem could be and what we would need to do to rectify this problem for future i…

I need to replace a dome camera we have in our store and we currently use the Vantage DSP colour dome camera (VSCM452). Can you recommend a replacement?

Please advise on CCTV camera to mount behind glass (e.g. lounge window)? It must perform using inbuilt IR (if possible), or satisfactorily when external security lights activated at night but, essentially, a Day & Night Camera. It may be :- WiFi or Hardwired; Movement activated or permanently operational; Compatible with 'common' CCTV Systems currently available; Thank you for your consideration,

Which ports do i need to forward on my router to allow external connections to the adpro fasttrace unit?

Hi, Just tried to setup remote viewing using surveillance client it pics up the ip address ok, then I add it to the group, but when I try the main view option it says the cammeras are not connected to the network, and I can't view anything, anyone know where I maybe going wrong Ive checked the ip and ports on both sides and they match. Also tried to connect using the asee app on a windows phone and it says connection failed, used ip address and mobile port number Cheers Matt

Hi All hope some one can help.Iam trying to obtain a user guide or instruction manual for a Visage sdvr 8 cctv system so I can backup footage to a external device .can anyone help? Many thanks Mark

Hello, I am at present using a avermedia DVR card in my computer to monitor an external dome camera with ptz and an internal camera, I can view and operate these cameras remotely over the internet. I would like to upgrade and have been looking at your Secware 4 250GB HD unit that you have for

Hi, Please can you recommend me a security CCTV system for a recording studio. I would like the following: - 3 cameras - would much prefer wireless so dont have to drill holes through walls - be able to record onto a PC, preferably with some kind of software that records "incidents" ? - be able to access video remotely from a different location - night vision is nice but not essential Kind regards Mark

Has anyone used ANPR via standard cameras? It seems to work ok with enough light and stationary or slow moving cars. I've seen it used at petrol stations and such like but can't seem to find much info on the web. Your thoughts would be appreciated. Regards, Daan

have an IP camera that I would like to alarm via a PIR. The Camera has I/O contacts & the input contacts create an alarm when shorted - the contacts are rated at 1amp @ 28v. Please suggest a PIR which will work - normally open contacts I assume & preferably battery powered.

Please could you confirm which cards you stock that are compatible with Zoneminder. The Zoneminder site points people to yourself as a good shop for compatible products in the UK> Thanks, Simon

i have a ESP Digi-View 4 Kit Four Channel Day/Night CCTV system but have lost the instruction manual and the 'menu' button will not work for me to be able to retrieve previous recordings. we had a robbery the other night and my cctv doesn't work properly, the irony is irritating. could you help me please?

The Dennard 2060 Domes, you have 3 different versions of (2060-203 / 2060-241 / 2060-243). I just wanted to know what is the difference between them all? Thank You.

Please advise which PTZ dome camera to purchase with use over Ethernet. Running single Cat5 cable and to possibly view over internet. To cover 60m2 area.

I cant open any of the pictures or videos the camera has taken. I noticed on the driver disk it only supports windows 98,me,2000 and xp, i have windows vista.is there a way to get round this with vista

Hi I am a residential customer, looking for a CCTV system, American dynamics I am aware of. I have a commercial background so do not want something that is ‘toys are us’. Initially I want two external cameras, 360 degrees, night & day, zoom as discrete as possible. They need to be hard wired to the recorder, which can then be accessed by wi fi but not wi fi cameras if you catch my drift. Also is the facility available for sound recording? I.e if someone is standing outside a property shouting is it possible to capture real time video and sound recordings that could be used in legal proceedings ? In addition to this I will be wanting an alarm I have used Banham in the …

Hello I am living in France and would like to install CCTV at home. I had a look in your catalogue on network and I had made some choice regarding cameras and recorder. To be more precise regarding my CCTV project, here below some detail info's. -Camera will be fitted outside, in a protected area regarding direct rain (below roof extender) at 2.5 m far from floor. -Max distance to record (10 m for 1 camera and 17 m for the second one) -Day night recording with auto switch. -1 camera will be orientated to the direct south, the second one to the direct north. -Recorder will be activated by a direct wired alarm loop coming from the central alarm block. -Play b…

Some questions, I looking for 4 pce of camera and one video recorder how can handle those cameras to record videos and save them, recording in loop so the oldest file will be deleted when the disc is full. The camera should be activated by some movement, it would be fine if the camera have some zoom lens so I can use cameras with good pic up to 20-30m, the resolution of image should be acceptable so you can see the sign of car registration on 20m. Please can you help me to fix some package with all things I need for that, and the system should be used in Sweden. I wounder if it's possible and compatibly to bay and use 4 pce of "Secware Pro Bullet IR 700TVL effio-E Camer…

As I can't find these items on your web site, are you able to source them? 7 internal low light dome cameras 1 8Ch DVR, 2TB 31 day recording facility 1 15" LCD basic monitor

Hi, we need to replace a Baxall ZT4 cctv controller which is being used in a medical environment (to monitor patients undergoing radiotherapy), could you please suggest a replacement control unit / system. The technical requirements are short range zoom with up/down and sideways movements. Thanks.

Hi, I am planning on installing three Axis 233D PTZs on poles to monitor a private driveway. I will be using Milestone XProtect to record the cameras permanently, but I'd like to add an IR detector to trigger an alarm in Milestone when motion is detected. I'd also like to connect a loudspeaker up to each camera so the monitoring station can give an audio warning. All the kit will be mounted 5m+ up lighting poles, with an IP66 enclosure just below the kit to hold a UPS and data switches etc. I'm leaning towards using Optrex LRP4010S IR detectors, and Bosch 35W Horn loudspeakers. Do I need an amplifiers between the Line out of the Axis 233D and the lo…