Secware

Hello! I have bought a nice second hand DSC wired panel (PC1864) and is looking for some detectors. I am among other things considering the https://www.securitywarehouse.co.uk/catalog/rokonet-shocktec-with-magnet-white-p-620.html As I understand it this unit does not require any external analyzer card or anything and should work as any stand alone wired detector with my DSC right? I am thinking on using it for the doors on my house - do the main part of the detector in this case need to be mounted on the door itself or will it detect vibrations from break ins even if mounted on the frame? Do this unit have space internally to mount resistor? Do you have some installation manual (on the http://www.riscogroup.com/ site you need to be a customer of theirs to download it)? Regarding PIRs is Optex DT 15m x15m active IR digital anti-masking, grade 3 a good choice (I really want to avoid false alarms and therefore dual tech) or is Honeywell Dual Tec DT8016F5 just as good for a lower price? If I go for the Optex unit what "EOL unit" (if any) would I need with my DSC (or is it also possible to use standard resistors - I already got these)? As for the Honeywell that has "built in resistor" - is the resistor value "standard" so it will work with my panel and not only with those sold by Honeywell? Finally for glass break does the https://www.securitywarehouse.co.uk/catalog/honeywell-flexguard-1625-glass-break-with-tamper-p-2573.html have internal space for mounting a resistor? Any other product you would sugest as an alternative to this one?

Require a ADE G3 Accenta Remote Control Pad that works in conjunction with a Jenko board. Would the current offering which you offer [ADE G3 - 4] that works with a Optima Board work with the Jenco board?

Can you tell me what wireless portal is required for the galaxy dimension 520. Thank you.

Dear Sir, I am looking for a wireless intrution alarm for a family house. I would like to have features such as, remote control frorm android or ios, GSM, camera display remotely. I live in Sweden and the alarm needs to support the EU standards so that it can be connected to a local security service if the alarm goes off. Would you recommend an Kit?

We have Optex FX-59 QZ alarm system which now it says to replace batteries however there are no batteries inside the sensors and in the panel. What are we supposed to do in this case? The alarm went off and an orange light keeps flashing.

I am looking at purchasing a home alarm system for my house. My friends here in Sweden recommend the Visonic line. I am looking at a package to include the following: PowerMaster-33 G2 or PowerMaster-10 G2, could you please help me with what the pros and cons would be between these two? 1 x Internal GSM-modul GSM-350V21 2 x Wireless cameras (NEXT CAM PG2) 3 x Wireless magnets (MC-302 PG2) 2 x Wireless smoke detectors (SMD-426 PG2) Touch-panel + 3 tags either KPA-160 N PG2 or KP-250 PG2, could you please help me with what the pros and cons would be between these two? 1 x remote control Might also be interested in one or two outdoor cameras or motion detectors with lights

Can you provide visonic power master magnets to compliment the visonic shock/vibration sensor making it a shock/contact sensor?

Hi, We have the below smoke detectors set up in a property we manage and I was wondering if there is a carbon monoxide + smoke detector with which we can replace the units in the kitchen and plant room with and will connect with the rest of the system? Menvier/Cooper M12 4 in 1 Smoke Detector for Intruder Alarm

You sold the above to my installer when I renovated my property in 2012. I have never actually used it but now looking to start using it. The engineer at the time left me an engineers code which i cannot find nor can I remember the code I used. Is there anyway I can now get the alarm working? Your advice would be greatly appreciated or any contact at Scantronic. Many thanks ps a contacted another firm told me I would have to buy a new panel through him which I find hard to believe.

Hi, I am interested in the Visonic PowerMaster 33 but see that the panel itself only comes in a kit. I would like to add some items to the kit (additional chicklets, PIRs and a GSM-350) but also remove some items (door contact and per friendly PIRs). It is possible to modify the contents of the PowerMaster 33 kit so I do not have to purchase items I will not use ? Also is the SR-740 included in the kit the rectangular or hexagonal one ? Thanks,

my last ticket has been closed as I sent another query and not had a reply the setting is set to hazard and turned down I have pet set to 30 kgs twice the cats not in the conservatory the red and yellow lights have to be on is this correct

I have the following product I purchased last week - A073-00-01. It keeps throwing up RF Jam alerts. Is it possible that this can be faulty?

Hi, I need to purchase 2 of the Risco Wisdom Wireless 4 Button Fobs. Please could you tell me f I will be able to programme them to my alarm without the need of a professional, do they come with programming instructions? The alarm system is Gardtec eurosec CPX. Many thanks,

just installed above pir in a conservatory and there are cats it activated 3 times with and without cats is there any settings I should set for a small conservatory?

I would like to purchase a Visonic Powerlink3 for my Powermaster10 system. Can you confirm I can use it to directly access my alarm panel remotely, rather than needing to use a Power Manage system please? I am hoping I will be able to access my panel by using the IP Address of the system.

thanks for that info. What about the battery and bell box also can I use a call sender with this alarm?

Dear. I try to install KP-250 PG2 to my Powermaster 30. But the cetral unit only say: "Wrong ID". What shall I do?

Can you confirm the version no of the Wintex software

Hi, I'm interested in buying a complete intruder alarm system based on the Honeywell Flex 20 panel. I want to include a smoke alarm, probably the Honeywell ECO1002 combined photo/thermal unit and connect it to the intruder alarm system. Should I buy a latching or a non-latching base? I'd like to place the order today if possible,

I have purchased a Castle Euro Mini. The box only contained a control panel and the main alarm panel.. I would like to purchase 3 PIRs and 2 door sensors plus a battery and a bell box. There are so many on your website. Please advise the best for my system. Is it possible to also fit a call sender?

Hi... can you help me locate the correct type of wireless door contact switch for my home alarm system please? The system has a cooper security scantronic 9930 control. I have a wireless contact on top of a garage door which has failed.. I have changed the battery to no effect. I could send you pictures if it helps locate the correct type. Would you also be able to help with instructions for replacing the unit. I do have access to the installer mode code Many thanks

Hi, I have installed a Visonic PowerMaster 10 with 2 x external & 1 x internal siren, and also a GSM module for notification/alerts (all purchased from yourselves). I would like to connect a SMD427 PG2 Smoke & Heat detector. Please could you confirm that it is possible to configure this system so that when Smoke or Heat is detected, the device itself emits sound but NOT the external sirens? And that a call/text also be generated via the GSM module? (to clarify, it is not desired that the external sirens will sound upon detection of smoke or heat but internal sounds are fine, also desired that remote alerts are generated - hope that makes sense) Thanks

Are there any other simple alarms which are able to be controlled by an app as the Flex is? We are currently looking at the Honeywell Galaxy Flex 20.

the Takex 200m external quad actine beam will it work on a farm where there are wild birds flying i also need a phone card diallier

Hi, We have one a 'Gardtec 800' system installed in a premises in Dingle, County Kerry, Ireland. We need to order a new Keypad for the system, as the display is not functioning correctly. It is a 6 wired keypad. Could you recommend a keypad, or would it be best to completely replace the control box and keypad panel? If we could get your advise on the above it would be much appreciated.