Access Control

Hi i talked to Elaine on friday about getting some extra safty beams for the came 2 frog kit but she has not got bck to me yet any chance of a price i need 3 extra sets! many thanks Gary Read

does this product come with the frame pictured? If not how much is the frame?

Videx Stand Alone Proximity Reader

I am a designer who has redecorated a flat in London. During work the frame around the white BPT nova intercom has been mislaid. Please can you quote me to replace the white surround frame as soon as possible?

Hi I have a MHF02X unit which seems to have died (power to it seems ok but nothing from the unit itself) before I replace it with a new unit is it worthwhile looking at alternatives or upgrades and can you advise please?

Hi I bought the Prox10 kit from you, and was wondering what cable should run to the keypad/lock release. It's only 12v/1amp - does it just need something like speaker cable or .5mm T&E, or is there a "proper" spec that I should use Thanks Chris

I am looking to buy a security keypad for the college I work at, we are wanting one where you have a digital code it is to go onto a filling room door to keep out other staff and students. Any ideas into which one we could buy, would like it to be as cheap as possible

Please can you give me some information regarding the act pro 3000. We have a heath club at the moment all member join online once there join there are give a 6 dig pin number this is all done automatable. At the gym we have a turnstiles with an act 10 key pad link to an act pro 1000 controller with is than attach to a pc. The we now face is the act pro 1000 is no good as we have more than a 1000 members so we can not release no more pins also it has a fault so being repair at the moment. This is what we are looking for so it can be upload automatable to the turnstiles as we have to do it manually Will the act pro 3000 do this if so we will order the act pro 3000 right a…

As a property developer I'm looking to install a Videx 4 button surface mounted door entry with 4 no handsets and a main entrance electronic door release catch/plate. Please advise me of the cost and availability asap. Note it would be useful to have the vandal resistant external 4 button entry point.

dear sir have just instoled a single door access control keypad with with a remote exit switch ,i have a problem wit h programing the key pad ,i have followed the instuction but with no sucees the remote exit switch works fine

Hi all, I have a Honeywell GD48 intruder panel and want to start using door control access. I think i need a Honeywell C080 DCM so that should be fine and so I am seeking recommendations on an electronic door lock as well as a good quality Wiegand 8bit keypad for external mounting. Background to request: I have a son who 'forgets' to lock the door manually when he goes out so i am wanting to replace the lock with an electronic one which is connected to my Honeywell Dimension GD48 and to force my son to either gain entry by the wiegand keypad or by using his lock key(is there a dual lock solution where either physical key or entry through keypad is possible?). …

We are looking into replacing our paxton key fobs with an entry card so we can print picture ID's onto them. Could we use something like the Paxton CARDLOCK extra User Card with our Net2 system, and if not is there a cheap alternative. I believe our readers are PROXIMITY P50 readers

could you tell me if you supply a direct replacement for a Videx Handset/Intercom unit. The details on the handset are as follows, ART 942 HW VER 2.1 S.N.B3140392

My friend has just moved into an apartment which has a Videx KRV78 Door Entry System. She is 86 and rather deaf and cannot hear the buzzer when someone rings her apartment. Can you please advise if there is an Extension Sounder compatible with this system. If so, which model and how much would it be please, including postage and packing. I look forward to hearing from you shortly. Many thanks.

Can you supply a weather proof proximity reader for use with a key fob.

hi I wonder if you could help me I am looking at your esp colour / mono video door entry system kit c/w 12vdc transformer. what do I need to install this equiptment ,what does this come with,how is it fitted,

hi ,the school where I conduct maintenance has a Videx door entry system VX800-2L that has a defective audio unit.I have noticed an audio speaker unit with two push to speak buttons within your products. My question is would this unit be suitable for a replacement and is there a similar unit with just one button on .

Do you stock the 9135110E and 9135331E 1 button intercom and rain cover from 2N? If so, how much are they?!

I hope you can help please. I have a simple set up of electrically powered gates with an intercom from the house to the gates. Various bits have needed to be replaced over the years so I cannot accurately describe the components. My problem is that the intercom no longer works properly. We found with some research that the entry and receiver volumes could be adjusted within the HA/200 entry module. Now with both set to maximum we can hear from the gates to the house (with some distortion and background noise), but not the other way. (The press buzzer works properly.) I think I need to replace the audio module which seems simple and cheap, but can you please comment. There…

Hi there, I have a client that requires 1-way video entry at two separate doors. The outputs of which are both required to be connected to each of two points in the building. Is this even possible and if so what kit would you recommend for it? Thanks.

Hello. I am enquiring about the Videx 3011 handset. I am wondering if this handset is suitable for all Videx door entry systems? I am an NHS Occupational Therapist working in North London and have a patient who needs an extension of her current system as she is unable to reach the handset already in her flat. I need to order another phone and need to ensure this one will work with the system in situ before ordering it. Many thanks,

can you give me the dimensions for the above lock? Is the .9 amp a peak current as il be using the 1 amp elmdene supply? Also is it designed for recessing like normal solenoid locks (ie not a magnetic lock which is bulky) I want to recess it into door frame directly above door centre.

I am interested in buying an ACT 5 proximity reader for door control and was wondering whether the fob of my scantronic 9651 with 9943 keypad would work with this. This would mean I would only have to carry the one fob to open the door and set/reset the alarm. According to page 28 of the 9651 installation manual "You can use any industry standard ISO tag or card with the 9943 keypad" so I would guess the ACT and scantronic fobs are compatible but wondered whether you could confirm this please.

This topic has been moved to Intruder Alarms. [iurl]http://www.securitywarehouse.co.uk/forums/index.php?topic=2765.0[/iurl]