Access Control

looking for a list of GSM dialers for a door entry system. we have a 20 room sub let office building that is difficult to retro fit. the land lord now requires a door entry system. do you offer a GSM to landline call from a PAYG sim card system?

Hello, my organisation is into information security, audit and control. I am in the process of adding to my services Biometric access control. I have seen the rand of your products and i am interested in becoming a reseller in Nigeria. What is the procedure and your advice. Thanks Philip

I am interested in buying an ACT 5 proximity reader for door control and was wondering whether the fob of my scantronic 9651 with 9943 keypad would work with this. This would mean I would only have to carry the one fob to open the door and set/reset the alarm. According to page 28 of the 9651 installation manual "You can use any industry standard ISO tag or card with the 9943 keypad" so I would guess the ACT and scantronic fobs are compatible but wondered whether you could confirm this please.

Hello , having problems with my house alarm and looking for advice on replacement and upgrade. It's a Gardtec 800 series with 5 pirs. So I have been advised to change the keypad and control box as it is 20 plus years old

have ordered a couple of your Secware External 500lb Magnetic Lock Can you please advise me of the dimentions of these magnets. most of all i need to know the width of it so i can make preperations before they arrive.

Hi there, I have a client that requires 1-way video entry at two separate doors. The outputs of which are both required to be connected to each of two points in the building. Is this even possible and if so what kit would you recommend for it? Thanks.

We require a Videx ART.522 transformer (or possibly VI505) to replace one that has packed in. 240 to AC 13V and 15VA. Please could you tell me if you can supply these and the price.

Regarding my recent order No 1xxxx of the Videx 3011 hand set, I have received the hand set but it contains no subsequent wiring diagram. Can you supply me with one or link to info or give info how to connect. Many thanks

I have the above item installed. the engineer put a t mob sim in with

can you advise please? we have had security gates fitted 200mtrs from the farm house, 4 core amoured cable plus a bt wire for the phone, the quote for the work done was for integral phones, plus an external bell to enable us to hear people at the entrance!when we are about the farm,so far the fitters have been unable to get a bell to work due to the fact they tell me its 12 volts from the bt line and the distance away won\\\'t power a bell?? can you help me please.

I am looking to buy a security keypad for the college I work at, we are wanting one where you have a digital code it is to go onto a filling room door to keep out other staff and students. Any ideas into which one we could buy, would like it to be as cheap as possible

Would like info on how to change access code on a videx 1 button+coded access

We are currently looking for a door access control system that manages one door, both entry and exit. It would need to be able to connect to a computer so that staff entry/exit times could be monitored. I have found this on your site: http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=1191&currency=GBP Would this fit our needs as the description on the page is a tad vague. Thanks in advance.

Recently our gate has been having troubles with the panel that allows access. We have what I believe to be a Videx Housing with two supplied panels, speaker and keypad. I've looked for the same models however they seem to be absolute/discontinued therefore I was looking for recommendations on viable replacements as I know nothing about these type of units. I've listed what I believe to be the model reference for each panel below: Keypad: Videx (VX) 800N-2L Speaker: Art.836M Thank you for your time and I look forward to hearing from you

Videx Stand Alone Proximity Reader

Just moved into house with ESP Enterview 5 and bell only sounds on the outside unit, no ring internally, so very hard to hear. Is that normal? Alternatively if I want to replace it with a newer ESP model using installed PSU what would you recommend and would the new one sound inside or do they need plugin or wired extenders?

please could you help me with a wiring question. I have puchases a 3021a handset which replaces an old creeam coloured videx vx handset. The old handset had 5 connected points at 1,2,5,6 and 7. Before disconnecting I labelled the wires, removed the handset and re-connected at the same points but I have noticed there is no connection 7 on the 3021a model. The new model has connection points 4,6,2,1,3,5,9,8 but no point 7? So now I have an unconnected wire. Could you please provide some help on this.

We have a cross point XL security gate and wish to purchase bar-coded security tags that can be fixed to our media equipment, stills and video cameras, could you recommend a suitable product and give details of price.

I have just bought an YS 200 UK handset from yourselves to replace an old AS E/200, please could you tell me the connections on the old AS e/200 as i don't have a connection diagram.

We are electrical contractors,we have a site that contains an existing videx entry system(looks approx 5 10 years old)we've been asked to add an additional audio entry phone. can we simply cable from the existing handset to a new one? We think the intercom phone serial no is VX Smart LC631/03

Deleted

hi the button on my videx unit has broken and i see there is three diferant ones on line with just one button, whats the differance / would the videx ac 800 be ok. i only have one standered phone inside withe the gate releace on it

My friend has just moved into an apartment which has a Videx KRV78 Door Entry System. She is 86 and rather deaf and cannot hear the buzzer when someone rings her apartment. Can you please advise if there is an Extension Sounder compatible with this system. If so, which model and how much would it be please, including postage and packing. I look forward to hearing from you shortly. Many thanks.

I need to replace a broken rim lock strike that was purchased as part of an ACT basic pin entry system. The strike has "bell system" written on it but no part number. Can you please advise me as to which part to buy.

I want to specify a Paxton Pro Standalone unit for a FD60 exit door. What lock should i specify for best compatibility? Do you supply a mortice latch/lock/lever unit that works with it?