Intruder Alarms

I just bought an AMDT and I'd like to understand the purpose of the SET wire. What is the Alert/Set mode ? Should it be left unconnected (and be in the standby mode) ? BTW, what is its current drain ? Thanks.

Hi all, im just wondering if the, Texecom Prestige External TD Outdoor Motion Sensor, is compatable with the texecom veritas r8 system, if so how is it connected and can you use the chime facility? thanks daniel

Hello again I've recently come across a fault with the above type of detector. I seem to be getting either the sensor false firing or possible emc problems. I've lowered the sensitivity with the internal jumper but the fault is still present, all connections and continuity through cable seems to be good this is why I'm now thinking it could be emc. If it is emc does anyone know of a cure that doesn't involve re-running of cable. Thanks in advance for any suggestions.

Hi, Will you be stocking the new Texecom SmartCom? Product code CEL-0002 As per http://texecom-marketing.com/O4B-570QI-B14J60Z709/cr.aspx and https://twitter.com/TexecomLtd/status/913386788437315584

Hi, I hope somebody can shed a light on this fault I have on the Texecom Excel panel. Installed this on Saturday but Zone 6 keeps triggering after being armed after a few minutes. Checked the Pir and that seems OK. So removed the Pir in circuit and strapped a 10K resister in Z6 but still activates after a few minutes. Is there a simple solution to this or a faulty panel. All other zones are working good. Using EOL method. Thanks in advance.

Does the Texecom veritas R8+ you have listed on your site come with the LED keypad or the LCD?? I think you should do a special day were you have free delivery with your order . I'd order one form you but the VAT and postage adds up. Im only 14 too!

Hi there Is it possible for you to give me a price for a replacement control board for a texecom Veritas R8+ end station? I have the transformer. Can you also price up an ADE reson8 bellbox please?

Hi, Which version of the Wintex software is it you have for purchase? I have a older copy which does not seem to work properly with a new Premier 48 panel that I have purchased. The version that I have is 5.2 Thanks

Hello I have managed to obtain a copy of Wintex(v5) and the Veritas UDL. I've read that Wintex can also allow the programming of the veritas excel. Is this true? I can't find the option under "account" that allows you to choose a veritas; the list just has the premier systems... With the Veritas UDL am I required to buy a texecom PC-COM? Can't I just make my own RS232 using the tx rx and 0v (pinout 2 3 5 on the rs232) Can you please tell me whether or not I can build my own cable?

Hi, is question more to the techniacl support, about advice: I was wondering abou Texecom Panel CAA*0026 I'm wondering if that panel has got a dialler function, can it call or send message in case of alarm, if not maybe this one CAB-0001 or should buy dialler CGC 0001 and integrate with panel (Do I need any digi card) Regards Mariusz

hi , I have a warehouse building (vehicle workshop) with cars parked at teh entrance needed some advice as to which product you sell that can be used to notify me of human entry into the entrance area with cars parked in the entrance gateway , Also am thinking of installing CCTV , preferably high definition to observethe yard next door. Thank you in advance for yourhelp.

Re: Pyronix Deltabell Plus External Sounder Module Grade 2 Hi I have a dummy rear box. Could I simply connect 12V to this and make it light up my box at night together with the 2 LED flashers?

will a Texecom premier elite RKP Model number DBD-0129 Work on a ADE Honeywell Accenta Mini Gen 4 control panel ? As i have 3 lcd RKP at the moment, and i want to up grade them.

Can you advise which security panel would be suitable to replace one which has failed? (only lasted 15 years, but sadly now defunct!) This unit has 6 zones (hard-wired) of which I use 4. Anything that offers similar, at least 4 hard-wired + radio to cover areas not currently covered would do. Can you suggest something? I can install it.

What is the difference between Texecom Premier TD-W and GJD D-Tect X wireless? Are they both intended to perform the same job? Is there any drawback for Texecom product compared to the GJD one? How can i choose between these two?

Good morning, Thank you for your email regarding the cover for my Flash Guard sounder. I am quite happy to purchase a new unit but would like to know if the six core cable that controlled the old unit will be ok for a new one. I have included a photo of the old unit and to which colour went to which connection on the vertical block located on the left of the photo. 1- Yellow (Tamp out) 2- White (Tamp in) 3- 4- Blue (Supply minus) 5- 6- Green (Trigger) 7- Red (Strobe plus) 8- Black (Trobe minus) There was then a Red coming from a battery going to the plus connection on the small terminal block. I hope this will help in recommending the right sounder for my application.

I recently purchased a Honeywell galaxy G2K3WR-01-C and ADE Honeywell 8IR103 PIR. I require some technical support for wiring the Activ8 detector (ADE Honeywell 8IR103 PIR). I have the usual manual which comes with the panel and the detector but it is not that clear. I am simply putting one detector per zone and resistors at the detector end. I which to know where the resistors are actually connected to and where cables are connected to. Would you be able to assist please? Also, can you advise what speech dialler would I need for this system please ?

Hello I have a Honeywell Galaxy Dimension Alarm system, with the plastic housing RF module and a mk7 keypad fitted. I am looking to upgrade to Galaxy Flex to make use of the App, and also the mk8 keypad. My current system has several faults I cannot clear, and unfortunately my Alarm installer has gone AWOL and he has changed the default engineer codes. Can you let me know if this would be the right kit to replace my current panel: Model: C005-S1-E1+CP051-01+A083-00-02 - £208.65 Ex VAT And do you sell the backup battery to suit this new panel

Hi Can you please advise the best IR Beam for my outside gates, needs to have 10 meter distance ?

Hi, I have a Honeywell Flex 20 C005-E2-K04I with Mk8 Keyprox Keypad and Ethernet and I am looking for IR detectors. what do you recommend? I am not interested in wireless detectors, could you please also advise which smoke detector, door magnet and RF portal card is required? Doesn't have to be Honeywell.

Hi, Im looking for additional replacement wireless sensors (contact and vibration) for a Risco WIsdom system, RWT62 (contact) and RWT6S (shock), you dont seem to have these in stock. Are there compatible replacements? I think they also be available under the Gardtec brand.

Hi, we are looking for a ?security chain? to attach to an out-board boat engine. Should the chain be tampered with we would like an alarm to sound in the house, not at the boat, maybe 30 metres away. Do you have anything suitable? Thanks

Hello I am having trouble finding a suitable hybrid wired/wireless alarm system. I have owned an alarm system in Australia, but I am having trouble finding a solution which re-creates the features that alarm had. The panel is for domestic purposes, and I would like it to have: * A wired door entry pin code pad * Be able to use a mixture of wired and wireless PIR/Glass break detectors/and shock detectors (Last one where possible) * The door contacts must be wireless, and as discrete as possible * Wired external bell box/strobe * The panel must be able to do part sets : eg, night mode > full perimeter armed,internal PIRs off, no delay on front door Home mode > Selecta…

Hi, with the Visonic Powermaster 33 if I fit the GSM module what functionality do you have through the app, or do you need to subscribe to the monitoring program to gain the app functionality. Also what type of sim is required, will it work with a G4 network or does it as with other alarms only work with the older G2 networks? Thanks

Good afternoon, I consider buying a Visonic Powermaster33 system. My premises are in Germany, and operating a UK system in Germany may cause some headache (or not). Is it possible to connect said system to non-UK alarm response services? I have been told that UK systems are locked to UK response services which would render the whole system useless for people in other countries. I already know that there are some restrictions concerning the interoperability of devices. Please shade light on the topic. Thanks in advance!