Intruder Alarms

Does this unit have a double pole switch over or if not what is the price of the same unit with double pole switch over.

I installed an I-on40 and two keypads, KP-01. I had a problem earlier in the year whereby the keypads beep indicating 'Duplicate Entry.' I tried replacing the keypads with a spare, but this did not resolve the issue. I had thought that it might be caused by line termination, so I changed that. It worked for several months, with one terminated and the other unterminated, but the 'Duplicate Entry'; has returned. KP1 is located about 1 meter away from the I-on40; KP2 is located about 10 meters away. KP1 is set to address 4; KP2 to address 2. The error occurs whether I try setting or unsetting the I-on40 either manually, by typing in the code, or by using a fob.

I bought the visonic kp-160 from securitywarehouse along time ago. (Over 1 ago) I been waiting for a new firmware update since then for the kp-160. In sweden the kp-160 can handle both manuel type code and tags for over 1 year with a new firmware. When will this firmware be avalible on the uk versions of kp-160. Kp-160 is pretty useless when i cannot type code on it, i thought that could be done when i order it.

Which cable is best to use for the Comm's network ie Galaxy Panel to Keypads and to RIO's?

I am looking at your product MCR-308 + RL8 on-line and just wanted to confirm the the item includes the relay module (RL8). I want to use the item to add wireless zones to an existing Scantronic 9651 system, could you confirm that this is suitable?

please could you supply information on internal wiring of contact as I can not explain to my engineers how they work when connecting 2 contact together we have wired them and are working BUT not sure how wired in side contact ?

Hi, I have installed my first wireless le sucre PIR on my flex system. Everything went ok with pairing until next morning I get keypad message rf batlow. Result: I am on my 3rd battery in 3 days!! So I have changed old PIR removed serial and paired new PIR with the panel and I can see the new serial No. in th RF intruder zone (signal strength is good menu 21). When I do a walk test I get no result from the RF zone. If I activate tamper the panel registers it. When I walk pass the sensor I get 2 long flashes then when I move after that I just get 2 short flashes. I thougth that wireless PIRs do not flash after warm up unless the alarm is set? The PIR does this wethe…

We have an old Scantronic 4600 alarm and want to be able to remotely set and unset the alarm. Do you sell a remote control device that will allow us to do this? We have a Scantronic 4605 UK-55 remote device but this seems to be able to set the alarm but not unset it which is a pain!

Can someone tell me if the Pyronix KX10DP from SecurityWarehouse does work also in The Netherlands? Need 5 pcs. thnx!!

Please help are the Bosh BLP1-P Pet friendly PIR Sensors compatable with the Honeywell Accenta Mini Gen 4 Intruder Panel & LED Keypad Plus FlashGuard Bell box?

I am looking for a engineers and user manual for above panel, can anyone help?

I was thinking about additional shock or contact protection for UPVC french doors in the kitchen at the back of the house. I'll have a PIR covering the kitchen area already, it's only a small one, but was thinking about something like the Viper GLX contacted sensor. I know that obviously shock sensors work better/best on a wooden framed doors/windows and obviously UPVC frames are affected by heat expansion etc. What are you thoughts on it, would you recommend it? Or just stick with contacts instead. Thanks in advance.

I am looking to purchase a replacment alarm panel mainly "ADE Honeywell Optima Compact Gen4" I need to know what battery fits this unit please, I have tried reading the specs and can find no mention of the requested information being listed.

just wondering if you stock a piece of hardware which allows you to separately connect cameras and PIR sensors they don't really have to be connected together but would like remote notification of PIR sensing so cameras can be looked at

Dialler with gsm backup if bt line fails.

will this alarm box be compatible with my avanti sytem.I have an MDT bell box which is no longer working, I have tried running a 12v supply to bypass the battery,the green/red lights come on, but no sounder. thanks https://www.securitywarehouse.co.uk/catalog/intruder-alarm-c-36/sounders-c-36_45/external-sounders-c-36_45_140/pyronix-deltabell-plus-external-sounder-back-plate-blue-p-2867.html

We have an 8 year old 4-channel SD1 unit in a holiday home in France that has recently stopped dialling out. The other functions (message record/test playback etc) appear to work. When you send a test call (put into ready & press A1 for instance) it immediately plays back the correct message over the internalspeaker 4x but does not appear to wait to detect the dialing tone, or phone out. The adjacent spurred 56V socket works with normal phone and 56V detected at SD1 phone input terminals i.e. probably not supply problem. From listening on the line it appears be trying to pulse dial (it used to tonedial) but forcing tone via phonenumber T-prefix makes no difference nei…

I have a PowerMAx complete wireless alarm system installed in the house. I was wanting to add an additional wireless siren (the system can handle a maximum of 2). I already have the MCS -740 wireless alarm and was hoping to purchase the wired version of this alarm, the MCS-730AC. Can you check for system compatibility. The version number of the panel is: JS702159 B.17.107 JS700421 V.1.0.02

What is the difference between Grade2 & Grade3 Sounders

i have a client with a texecom 48 and wants some smoke detectors now some people say run alarm cable but i would of thought it be better to use the red fire rated cable?

Looking to fit a low cost wire alarm into a small 2 bed house. Need 2x door contacts, 2 PIR and 1 sounder. Ideally I would prefer a seperate small keypad, as there is little room in the hall for the panel, and would like to add in 2 smoke detectors. Price is key, could anyone recommend a panel or kit.

Good morning I wondered if you could help, we have fitted a ali door to a business which has a Chubb alarm system, and the Chubb engineer has said the below. "The lock or keep needs to have an integral micro switch contact on it to provide electrical connections. Giving common, normally open and normally closed options for the connection onto the alarm" I could really use some help with this from someone who knows, I do have pictures of the door if i can send them across to you. Wondered if you had i stock or could get what i need, Thank you

Hi - just wondering if the G4 LED keypads for the Accenta are compatible with the G3 RKPs/systems? Also, do you sell these G4 RKPs seperately?

I am looking to replace my current alarm system with a new modern system. One of my main requirements is to allow remote access to the system, and so I am looking at the Scantronic i-on 40. Although all of my sensors are wired the wireless capability will be handy if I have to upgrade in the future. I also require SMS messaging through GSM and PSTN so would be looking to also install these modules as well as one extra wireless keypad. My main concern at the moment is how the wired sensors and PIRs are connected to the i-on 40 system to ensure it will work with my current installation. Can you provide any information as to how the zones are wired on the system, or are …

I have an old (broken) Honeywell optima system and want to replace it with a new control panel, remote keypad, upgrade to the PIR sensors that are both microwave and I.R. and also have SMS alerts when there is an event, so I was looking at your website and saw you have a *lot* of things... just wanted to chat about what solution you could recommend. (I'm in the north west)