Intruder Alarms

I have a domestic Itec Horizon alarm system with shock sensors wired on every window and door sensors on the front and back door. The systen does not use PIR's. The main Horizon box has developed a fault and I understand these are quite old now and no longer available. Can you tell me what a modern equivalent system is that would be compatible with the existing installation - ie the window and door sensors and the price?

I wish to order the following, can you help me ? 1x Texecom R8 plus + battery 3x Keypad (normal, no lcd) 1x indepedent Bell for inside + battery 1x indepedent Bell for outside + battery 2x Heat detector + shipping to France Thank you, very much (No need of PT wise i have already in stock ) Well, So i have 2 questions : i don't find any bell that are independant with battery, can you tell me a reference for one outside and inside ? For heat sensor, do i need RELAY version or not ?

, I have an older alarm panel that does not need EOL resistors. Is there a way to use this device without the EOL resistors selected as a normally closed circuit like traditional alarm circuits? Before I had the texecom AED 0001 which is fine but this new replacement talks about EOL resistors built in in the literature. I just want to know if it is compatible with the texecom veritas panel which doesn't use EOL

Accenta G4 mini from you. Connected it up and fully tested including under alarm conditions. Last week I had an alarm activation which worked fine BUT the strobe will not reset. Thinking I had a faulty siren I bought a Honeywell ActiveGuard AG3 from you. I powered down the panel and connected the new siren. Repowered and the strobe was immediately flashing and still won't reset! Powered down the panel and connected the siren with a short length of new cable. Repowered the panel and the strobe was immediately flashing and still won't reset.

My first question is can you confirm the total load current of the AG6 is 260mA max as I seen else where figures higher than this. The total load for the Logic six is only 1A. My second question is could the second AG6 be wired with only the strobe operating but keeping the anti tamper working? If so how would this be wired?

It keeps sounding at random times, with no tamper fault and no error message on the control panel. The problem seems to lie with the sounder only.

We are looking for a fully wireless, self install inturder system for our Gardeners Yard, we would need a few internal motion detectors and door contacts and some external gate contacts, we also would want some external sirens. We do have some power in the building for the base, but no internet and very little 4G signal., Is this something you can advise on?

I am after an alarm system for my barn. It needs 4 zones minimum and a gsm dialler. What can you recommend ?

I require an alarm system that has the capability of giving 2 outputs to a relay to indicate Set/Unset and Alarm sounding. there is only a requirement for 4 zones (2 door contacts and 2 PIRS), an external bell box and we need 2 keypad i have been looking at the Texecom alarm systems as we are familiar with these. can you advise which model would give me the above requirements.

Hi there, I'm trying to source the components for an alarm kit for a building which is divided into two with two separate doors, but ideally one common alarm system. I have worked out that I need - Bellbox (external) - Keypad x2 (RFID/Tag or similar would be great!) - PIR x 3 - Control Box with backup battery - Door contact x 3 - Cable & Clips Would you be able to advise in which products you think would be most suitable?

i'd like to fit an alarm system into my double garage but am not sure which is the right kit to fit. I've installed a Texecom into my house which i'm very happy with so ideally would like to use their kit again if possible. I'd like to keep the house and garage system completely seperate. By my reckoning i need 1 x control pannel with keypad for in the garage 1 x remote keypad for in the house (incase of false alarm activation) 2 x suitable garage PIRs 1 x remote control (for controlling from the car as the doors are remote controlled also) 1 x red LED flashing external light to show alarm is set 1 x external strobe to show alarm has been activated 1 x internal…

Hello, I'm french and my english is very poor... I'm a retired man living in a house and so I'm not a company. My house has 15 contacts of relays (one on each door and on each window), they had been placed during the construction of the house. The wires are in the wall and completely hidden. I'm looking for wired alarm with an ability of extension ( number of wired captors or also wireless captors). The centrale must be quite (no siren) to be dissimulated from the burglars. In my bedroom I want and keypad with a LCD that can indicate to me where the intrusion occurs. My job was in informatic system, so I will be happy to configure my alarm wit…

I would like to order 10x Optex VX402REC outdoor sensors. Please could you help put together a basic alarm systems as follows: 10x Optex VX402REC sensors Outdoor Sounder Indoor Sounder Key pad to disarm Please could you price for a reliable system and also could you provide a wired option as well as a wireless option?

I am interested in the wireless detectors for my home. (outdoor) Blueline PIR Detector We live on a very large property with three large dogs in the garden. 2.What I would like to do is divide the property into 4 security zones which can be armed and disarmed independently. I was thinking of placing about 4 or 5 detectors in each zone. Could you make any suggestions? Do you think that the above detector will be right for me? Next, I would like to hear your opinion about the receivers and/or control panel that I would need? The control panel (alarm system) should be armed and disarmed by using a remote control. My other concern is that we often experience po…

do you have an alarm kit that can be set on using the mobile phone? if yes send me the product code

Are there any other simple alarms which are able to be controlled by an app as the Flex is? We are currently looking at the Honeywell Galaxy Flex 20.

I just tried to purchase a GUARDALL W74065 M2 (W74065) IR detector, but the order was cancelled because the item is out of stock. I need to purchase a replacement for a faulty Guardall Apollo IR detector. Can you suggest a suitable replacement?

Does the Cooper's Prox Tag function with an ADT supplied "Honeywell Galaxy 2 Series" Thanks, Ken

I bought one Optima Compact Gen4 control panel in the past, and now I want to buy one more. Is there a way to arm/disarm the unit wirelessly? Is this what key fobs are for? If so, which is compatible?

can you let me know if the Honeywell activguard AG6 works with the Visonic powemax system that you sell.

Hi I have seen your Veritas R8 alarm range I think the items below are right, please can you confirm they are all correct prior to me placing my order. 1ea.- CQR 6 Core Intruder Alarm Cable 1ea.- Texecom VERITAS REMOTE KEYPAD 1ea.- Texecom VERITAS R8 4ea.- Texecom REFLEX 1ea.- Texecom ODYSSEY 3 LIVE BACK PLATE 1ea.- Texecom ODYSSEY 3 COVER WHITE I have ordered an extra remote, I also need batteries but it says sold out so please can you tell me the batteries I need and cost,order number etc. Please can you also confirm that I am buying this the cheapest way and not missing any offers and that I have not missed anything obvious ?? I dont need an internal s…

Can you please tell me if all these items are compatible thanks SECWARE 16 Ohm Internal Speaker Texecom Prestige Quad PIR SECWARE FUSEDSPUR SECWARE BACKBOX Texecom AFU-0004 Bracket for the Prestige Range Texecom VERITAS EXCEL C/W LCD RKP Texecom PSD001 SPEECH + TEXT DIALLER Enersys 12v 3.4 A/h Battery Unifix 4.5mm Round White Cable Clips Secware 6 core Intruder Alarm Cable Texecom IMPAQPlus With Built in Contact Texecom ODYSSEY 3E LIVE BACK PLATE GRADE3 Texecom ODYSSEY 3 COVER WHITE Secware Bellbox Label / Sticker

Please help are the Bosh BLP1-P Pet friendly PIR Sensors compatable with the Honeywell Accenta Mini Gen 4 Intruder Panel & LED Keypad Plus FlashGuard Bell box?

Hi, I am about to purchase the items in my Checkout Basket and would like confirmation that the chosen items are all compatable with each other. Also I require a dummy LED to go with the dummy backplate and cover, can you advice if you have this item for the Texecom ODYSSEY 3. I also require info on which backup battery is required and fits in the control panel I have chosen. The following items are in my Checkout Basket: 1off- Scantronic 9651EN-43 (9651 c/w 9943rkp) 6off- Bosch Blueline ISM-BLP1 PIR Detectors 1off- CQR SOINT1 internal sounder 1off- Texecom ODYSSEY 3E Live Backplate 1off- Texecom ODYSSEY 3 Dummy Backplate 2off- Texecom ODYSSEY 3 covers 1off- S…

hi i had a security company around my house the other day and they said i needed 6ea.- Optex RX-40 PT a magnetic reed contact for front door would the item below be suitable 1ea.- CQR Freewave Universal Door Contact and a oml-dt-x6 quad passive infrared detector do you have one of these and would al of these sensors work on the control unit 1ea.- ADE Honeywell Accenta Mini Gen4 with LCD Keypad would like to order this immediately