Intruder Alarms

I have a customer who is after adding a wireless keypad onto a Texacom Premier 24 (wired) system. I was under the impression that this was not possible without replacing the panel and all accessories (PIRs, Contacts etc) completely. Could you please advise me if there is a product whereby I can add a wireless keypad to this system

I am replacing an old system which is armed on exit using a shunt lock, I require a similar wired system. As we have a number of keyholders we prefer the final lock to arm / disarm the system in preference to a keycode

hi i had a security company around my house the other day and they said i needed 6ea.- Optex RX-40 PT a magnetic reed contact for front door would the item below be suitable 1ea.- CQR Freewave Universal Door Contact and a oml-dt-x6 quad passive infrared detector do you have one of these and would al of these sensors work on the control unit 1ea.- ADE Honeywell Accenta Mini Gen4 with LCD Keypad would like to order this immediately

I am looking too install a wired alarm system into a large powered garage and would like a recommendation on which of your products would be most suitable. Ideally I would like the control unit (with battery backup) separate to a keypad (or fob reader) so that it can be installed out of harms way. If possible, I would also like an external siren with strobe. For the sensors I think 2 PIRs would suffice however, these need to avoid false alarms so perhaps dual sensing ones would be better for me. The PIRs need to be able to cope with more extreme temperatures than inside a house, a hot motor vehicle being parked in front of them and probably the odd spider or two. Please…

many thanks recieved panic alarm fob today i recieved the 727r/728r i have registered te key fob to the alarm scantronic ion 16....however it does not arm or disarm the alarm i was wonderng if i had not done any thing obvious i also tried to add it as panic alarm that did not work. i was wondering if it could a faulty fob?

is it true that Visonic plans to stop production of the tower 20am?

Hi , about to place order and wondering main difference between accenta mini panel gen4 and standard poly gen 4 (other than size)

We moved into our house previously without pets but with one of the above alarm panels. I need to replace three PIR with pet friendly ones. You advertise the Scantronic 430, is this compatible with the 9450 panel. Also I wanted to install a dialler but it seems that you are out of stock of all diallers. If there is one that is compatible with my control panel could you please let me know. Also I would like a clue as to how to wire up the dialler to my panel. Please feel free to answer any one of the points. The main one being compatibility.

I have a Scantronic 9751 system with a faulty transformer and 9 year old battery that I am looking for replacements for. Is this something you can help with? Many thanks,

I want to order an ADE Honeywell Optima Compact Gen4 box, can you confirm that the Enersys 12v 1.2 A/h Battery is the correct type for this unit.

Hi my name is Jack, and I live and work in Finland. Finland is home to the Abloy un-pick-able un-bump-able lock, secure doors that open towards you and triple glazed windows. it also has a very low crime rate however crime is on the rise. And robbery is happening but still it seams no one here has home alarm systems! With a secure property why need one right?? ..... wrong Most people here have summer houses, log cabins in the woods often 100s of km from there home. These summer houses are often near lakes with no one else permanently living close by and a lot of Fins have motorboats or kayaks, bicycles and many other summer toys and nice things that they keep …

was hoping you sold the Visonic K9-85 pet immune PIR's but noticed the Scantronic CS430's that look almost identical on your listings (same can be said of Visonic K980 and Scantronic CS440). Can't remember if Cooper are now the same as Visonic but my question is, are they the same? Thanking you in advance,

When will the Visonic MCS-730 bell box be available on your web site?

I am unable to enrol the KP-141 PG2(June2013) to the Power Master 30 alarm system(Nov2012): - Full enrolment procedure: I select the * key on the keypad until the LED turns on and then release the * key. The Power Master 30 alarm system (i.e. Add New Device -> Enrol Now) indicates on its display, "Incompatible Device". - Pre-enrolment procedure: I enter the Id of the device into the Power Master 30 alarm system and it is accepted (i.e. Add New Device -> Enter Id). However, the Power Master 30 alarm system indicates that the keypad cannot be networked.

I am considering purchasing some sensors and require the red flashing light to be activated as a visual deterant when the alarm is ON and also when it is OFF. I am currently looking at the Viper GL-W thats says the LED is activated by LINK and the GLX-W that says is activated by SWITCH. Can you please explain what the difference is between LINK and SWITCH. Also, The GLX-W PC.09000-20 is priced at

I have recently ordered the SCANTRONIC 9448EUR-90. I believe this item has been sent to me missing the RKP. Looking at the description it should come with 1 RKP see description below] http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=172 My order number is 21987. Can you let me know please?

The Texecom Premier 88 Control Panel (Part No: DBD-0121) contains the User Guide and Master User Guide booklets but not the Installation Guide. Is this available on your site and can you provide me a link to it?

Hi, I had purchased a number of items from this site a while back, and just getting round to fitting. One of them was an AG6 bell box. My plan was to use this at the rear of the property to replace a dummy box, but to use the internal battery and LED to have a flashing deterrent at the rear. But I cant work out how to do this, or if its even possible? All instructions point towards needing the 12v coming from the panel, but I dont have this connection. Can the AG6 be set so that just the LED is flashing without panel connection? many thanks. https://www.securitywarehouse.co.uk/catalog/honeywell-activeguard-ag6-external-siren-blue-inc-white-cover-p-1973.html

Please can you clarify whether it is possible to have the Receiver and the Transmitter running on/from different power supplies. We have asituation where the alarm power supply cannot be supplied to the transmitter but can be to the receiver, so in theory it will function. If it is possible, do you have such a power supply - we assume a plug in transformer will do.

I have just orderd a ADE Optima gen4 8 zone from you. It will replace a c&k Active 5. I have the Engineers code for engineering mode. The problem is I can not stop the bell box from sounding when I disconect the bell wiring or when I try to open the bell box. The bell box was fitted and suppled by Abacus and is about 3 years old. I hope you can advise . Kind regards

I have installed the door contact (to replace one that ceased to operate). I have followed the "deleting" and "learning" instructions for my 500r panel and acheived the "double beep" to indicate that the panel has learned the code. However when the panel is "set", although all other sensors set off the alarm when activated, the door sensor does not activate the alarm on door opening or tamper (the led on the sensor does operate). Please advise what my next step should be.

I ALREADY HAVE A VERITAS 8C SECURITY PANEL FITTED AND EVERYTHING WORKS FINE APART FROM THE BUTTONS. THE NUMBERS HAVE ALMOST RUBBED OFF AND SOME BUTTONS ARE NOT FUNCTIONING PROPERLY WHEN BEING PRESSED. MY QUESTION IS ...IF I PURCHASE A NEW VERITAS 8C PANEL FROM YOU CAN I USE THE FRONT PART OF THE NEW PANEL TOGETHER WITH THE BUTTONS TO REPLACE THE OLD FRONT.

Would the Risco Novagard 6 Blue Live Backplate work with the ADE Honeywell Accenta Metal Gen4 with LCD Keypad or what sounder should one use with this control panel thanks

Hi, I have a texecom PIR which has a normally closed relay, unfortunately I have a voice off device which plays MP3s when triggered. This requires a Normally Open input which closes to trigger the MP3. Is there an off the shelf device which would convert this PIR from Normally Closed to Normally Open input? Many Thanks

I purchased an ade Optima Compact alarm system which I have fitted all seemed fine until I tried to alter the customer code from **** it would not accept the change but stopped the system from working. I have tried resetting the system back to factory settings as outlined in the manual but it does not work when the alarm is powered up it goes right into alarm but no LED lights show (not even the battery power)and the code **** does not rest/stop the alarm.